mapesdhs wrote:
Could PA 8.5 be incompatible in some way with 6.5.26?
Ian.
Ian.
i had v9 running on 6.5.30. the renderer crashed but it was fine otherwise.
_________________
r-a-c.de
josehill wrote: It is odd, since as far as I can tell, most, if not all, of the IRIX issues listed were resolved a few years ago.
wolflord wrote:foetz wrote: could you also try an ultrium?
I've tried one before, under at least 6.5.19 they have issues. I'm going to do a new install on the system Wednesday probably so I can run another test with a newer version of Irix. Are you looking for mainly LTO-1?
wolflord wrote: Ok, I had a bad drive for the first go round it seems...on the second drive Irix sees it as a generic 'cartridge device'. I was able to do the scsi inquiry commands, mt status commands and read and write to a tape using tar. In this case both drive types LTO 1 and 2 were scsi attached. Still running 6.5.19.
WolvesOfTheNight wrote: For the most part I find that the keyboards that come with computers are cheap peaces of junk, especially the dell keybaords that have overrun the place where I work. I have found that the clicky keyboards (old IBM Model-M) are some of the best keyboards out there, so I have one of my own that I use at work. However, they have the drawback of being rather noisy. Mine can drive my current office mate nuts. I can really sympathize with this since there are some backgound noises that can drive me nuts.
sgefant wrote: I must admit that I don't quite get the point of the question.
shadowless wrote: i know a o2 r5k model was about 10k at 97
toxygen wrote: single octane 300mhz w/o cdrom in 1997: 557 257 Czk ($16000)
modology wrote: I see. Also do u know whether Piranha Cinema 5 has IRIX version? or it is only Linux?
alestes wrote: The only that I want to know is how I can I solve this problem or quit this message because I can't do my job.
sybrfreq wrote: What is wrong with a commercial request?