I'm trying to install Solaris 2.5.1 on Motorola Powerstack. Got the boot floppy for motorola + cd media.
Here is the serial console log:
Quote:
Copyright Motorola Inc. 1988 - 1995, All Rights Reserved
PPC1 Debugger/Diagnostics Release Version 1.1 - 02/07/95
COLD Start
Local Memory Found =06000000 (&100663296)
MPU Clock Speed =99Mhz
BUS Clock Speed =66Mhz
WARNING: Keyboard not connected
SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL
SelfTest about to Begin... Press <ESC> to Bypass, <SPC> to Continue
AutoBoot about to Begin... Press <ESC> to Bypass, <SPC> to Continue
PPC1-Diag>ioi
I/O Inquiry Status:
CLUN DLUN CNTRL-TYPE DADDR DTYPE RM Inquiry-Data
0 30 NCR53C825 3 $01 Y ARCHIVE Python 28388-XXX 5.AC
0 40 NCR53C825 4 $01 Y CONNER CTMS 3200 7.15
0 50 NCR53C825 5 $05 Y TOSHIBA CD-ROM XM-4101TA 1084
0 60 NCR53C825 6 $01 Y ARCHIVE VIPER 2525 25462 -013
1 0 PC8477 0 $00 Y <None>
PPC1-Diag>pboot 1 0
Booting from: PC8477, Controller 1, Drive 0
Loading: Operating System
IPL Loaded at: $05F26000
Residual-Data Located at: $05F85000
-------------------------------------------------------
Welcome to SunSoft's Virtual OpenFirmware!
and it hangs here
The situation is same when using vga output. I stopped the autoboot and tried to boot from cdrom.
Quote:
ok boot cdrom
Attempting to boot from "/pci/pci1000,3@c/cdrom@5,0:,\solaris.elf"
deblocker_open: could not get block size
do_boot: unable to boot "/pci/pci1000,3@c/cdrom@5,0:,\solaris.elf"
ok