Maby G5 case? Looks nice
The collected works of pablodiablo
Hi. Try to change the sync signal source in display's channel manager. I do not have irix box here now, but i remember it helped with my LCD and onyx2 case.
regards
pawel
regards
pawel
I have here onyx2 with DG5-2/GVO option runnning Inferno 6.5.14.
I am considering to use second channel (numbered as 1) for playback preview. But I would like to have it connected to some nice DVI equipped LCD for HD recolution preview.
I there any 13w3--->HDSDI or 13w3--->DVI converters tha would work with DG5-2/GVO option that outputs SMTP HD stnadard signals based on the ircombine configurations installed by autodesk installers?
I know that one option is to stick in the xio XTHD option and converts HDSDI to DVI but this would cost me an option and converter, so maybe there is a chance for getting this done by a 13w3 converter only.
best regards
pawel
I am considering to use second channel (numbered as 1) for playback preview. But I would like to have it connected to some nice DVI equipped LCD for HD recolution preview.
I there any 13w3--->HDSDI or 13w3--->DVI converters tha would work with DG5-2/GVO option that outputs SMTP HD stnadard signals based on the ircombine configurations installed by autodesk installers?
I know that one option is to stick in the xio XTHD option and converts HDSDI to DVI but this would cost me an option and converter, so maybe there is a chance for getting this done by a 13w3 converter only.
best regards
pawel
_________________
No, it's not that. Signal should be changed to digital.
_________________
iKitsune wrote:
Good luck! Lemme know if you find anything.
You're not going to gain any quality, btw, by converting the analogue signal to digital. I would, personally, just do HD previews on something like my GDM-20E21.
You're not going to gain any quality, btw, by converting the analogue signal to digital. I would, personally, just do HD previews on something like my GDM-20E21.
Are you sure you would do that with any of SD/HD setting for ircombine that are installed with FFI software?
I was trying to use regular monitor for digital preview via channel but with limited success. I want to have digital signal so I could hook up some decent screen for 1920x1080.
Well maybe I will end up with XTHD plus HDSDItoDVI converter... we will see.
p.
_________________
If you have 28 of these drives, and want to get rid of it, I"d take it for 50USD per drive.
And by the way, I have here NetApp 2GBit arrays (xyratex rf-1400 ripoff), do they need special (netapp blessed) drives?
And by the way, I have here NetApp 2GBit arrays (xyratex rf-1400 ripoff), do they need special (netapp blessed) drives?
_________________
Ok, so this one:
http://www.allegro.pl/item790626436_mac ... _2_gb.html
will work as JBOD with normal drives without flashing, yes?
Does anyone now if this a dual active loop array?
http://www.allegro.pl/item790626436_mac ... _2_gb.html
will work as JBOD with normal drives without flashing, yes?
Does anyone now if this a dual active loop array?
_________________
will you sell DIVO separately?
Do you have original cd's that came with the system?
Hi. I have some project to deliver in .avi container encoded with xvid:
Codec: xvid,
Bitrate: 11000 Kb/s,
Frame size: 720x576 px (pal),
Fps: 25
Could anyone tell me if I can encode movie that is readable on my ONYX2 into that format with some neko-tools?
Codec: xvid,
Bitrate: 11000 Kb/s,
Frame size: 720x576 px (pal),
Fps: 25
Could anyone tell me if I can encode movie that is readable on my ONYX2 into that format with some neko-tools?
_________________
Hm, I am trying to figure out what kind of hocus pocus command should I type into terminal... to get the damn thing done, maybe someone more fluent in this magic would help me a bit... ha?
_________________
Can I find them on the regular IRIX cd's? I installed these boards in my onyx2 and would like to play a bit with them.
best regards
Pawel
best regards
Pawel
_________________
I only have 6.5 system pack here, unfortunately....
_________________
Ok, I registered for supportfolio
and started diggin
I see that 6.5.22 is free
for me hurrah!
thanks
and started diggin
I see that 6.5.22 is free
for me hurrah!
thanks
_________________
Hi,
have a problem, recently i switched the arrays that I used for framestore. We do not have FC router/switch neither the switchable storage so we do it just by pulling of the fiber cables. My problem is that after connecting back the old array I could not have it mounted and I recreated the framestore using sw_config by applying the same disk pattern that we used originally for this array. My mistake was that instead of using KEEP option we used CREATE option, so the original config data for the array is lost (probably) and it is seen in Inferno as empty one. Is there any way of recovering the frames that actualy still sits there?
best regards
Pawel
have a problem, recently i switched the arrays that I used for framestore. We do not have FC router/switch neither the switchable storage so we do it just by pulling of the fiber cables. My problem is that after connecting back the old array I could not have it mounted and I recreated the framestore using sw_config by applying the same disk pattern that we used originally for this array. My mistake was that instead of using KEEP option we used CREATE option, so the original config data for the array is lost (probably) and it is seen in Inferno as empty one. Is there any way of recovering the frames that actualy still sits there?
best regards
Pawel
_________________