SGI: hinv

Origin 350: 4x800MHz 8MB Cache | 4GB | 2UPX PCI Module

recondas
Moderator
Who joined June 6, 2004, 4:55 p.m.
and authored 4835 notes

Wrote the following at Nov. 18, 2011, 3:59 a.m...

Origin 350 with the less often seen 2UPX PCI Expansion Module (a standard 2U O350 chassis with four PCI-X and one XIO-2 slot, but without processor, memory or bedrock). The O350 and the 2UPX are linked via a NUMAlink cable connected to the external XIO ports.

Currently the O350 (001c01) has an IO9 and a QL2342 dual-channel 2GB FC board, the 2UPX (001e03) holds a QL12160 dual-channel U160 controller and an SGI-branded PXG2RB-SGI-RHoS dual-port Gigabit board.

Code:

  hinv -vm
  
  Location: /hw/module/001c01/node
  
  IP53_4CPU Board: barcode NGA768     part 030-1959-002 rev -B
  
  Location: /hw/module/001c01/PXbrick/xtalk/10
  
  2U_INT_53 Board: barcode NDL537     part 030-1809-004 rev -A
  
  Location: /hw/module/001c01/IXbrick/xtalk/15
  
  2U_INT_53 Board: barcode NXR118     part 030-1809-006 rev -C
  
  Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
  
  IO9 Board: barcode NYL142     part 030-1771-006 rev -A
  
  4 800 MHZ IP35 Processors
  
  CPU: MIPS R16000 Processor Chip Revision: 2.2
  
  FPU: MIPS R16010 Floating Point Chip Revision: 2.2
  
  CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 1 at Module 001c01/Slot 0/Slice B: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 2 at Module 001c01/Slot 0/Slice C: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 3 at Module 001c01/Slot 0/Slice D: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  Main memory size: 4096 Mbytes
  
  Instruction cache size: 32 Kbytes
  
  Data cache size: 32 Kbytes
  
  Secondary unified instruction/data cache size: 8 Mbytes
  
  Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
  
  Integral SCSI controller 9: Version QL12160, low voltage differential
  
  Integral SCSI controller 10: Version QL12160, low voltage differential
  
  Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  
  Integral SCSI controller 0: Version QL12160, low voltage differential
  
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  
  Integral SCSI controller 1: Version QL12160, low voltage differential
  
  Integral SCSI controller 11: Version Fibre Channel QL2342 Port 1, 100 MHz PCI-X
  
  Integral SCSI controller 12: Version Fibre Channel QL2342 Port 2, 100 MHz PCI-X
  
  IOC3/IOC4 serial port: tty7
  
  IOC3/IOC4 serial port: tty8
  
  IOC3/IOC4 serial port: tty9
  
  IOC3/IOC4 serial port: tty10
  
  Gigabit Ethernet: tg5, module 001c01, PCI bus 1 slot 1 port 0
  
  Gigabit Ethernet: tg6, module 001c01, PCI bus 1 slot 1 port 1
  
  Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
  
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
  
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
  
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
  
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
  
  IOC4 firmware revision 83
  
  IOC3/IOC4 external interrupts: 1
  
  HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
  
  IP35prom in Module 001c01/Slot n0: Revision 6.210

Code:

  >env
  
  001c01
  
  Environmental monitoring is enabled and running.
  
  Description    State       Warning Limits     Fault Limits       Current
  
  -------------- ----------  -----------------  -----------------  -------
  
  1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.777
  
  12V <not present>
  
  12V #2    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
  
  3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.320
  
  12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
  
  5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
  
  3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285
  
  PCI 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
  
  PCI 3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
  
  PCI 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.509
  
  PCI 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.966
  
  XIO 12V BIAS <not present>
  
  XIO 5V <not present>
  
  XIO 2.5V <not present>
  
  XIO 3.3V AUX <not present>
  
  IP53 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
  
  IP53 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
  
  IP53 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
  
  IP53 VCPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.241
  
  IP53 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.483
  
  IP53 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.495
  
  Description     State       Warning RPM  Current RPM
  
  --------------- ----------  -----------  -----------
  
  FAN  0  EXHST 1    Enabled         1980         2235
  
  FAN  1  EXHST 2    Enabled         1980         2220
  
  FAN  2       PS    Enabled         3200         4891
  
  FAN  3    PCI 1    Enabled         1980         2960
  
  FAN  4    PCI 2    Enabled         1980         2678
  
  Advisory   Critical   Fault      Current
  
  Description       State       Temp       Temp       Temp       Temp
  
  ----------------- ----------  ---------  ---------  ---------  ---------
  
  0 INTERFACE 0       Enabled   31C/ 87F   48C/118F   55C/131F   17C/ 62F
  
  1 INTERFACE 1       Enabled   31C/ 87F   48C/118F   55C/131F   19C/ 66F
  
  2 INTERFACE 2       Enabled   31C/ 87F   48C/118F   55C/131F   21C/ 69F
  
  3 PCI RISER         Enabled   31C/ 87F   48C/118F   55C/131F   19C/ 66F
  
  4 ODYSSEY        <not present>
  
  5 NODE              Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
  
  6 BEDROCK           Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
  
  001e03
  
  Environmental monitoring is enabled and running.
  
  Description    State       Warning Limits     Fault Limits       Current
  
  -------------- ----------  -----------------  -----------------  -------
  
  1.8V   Wait Pwr  10%   1.62/  1.98  20%   1.44/  2.16    0.028
  
  12V <not present>
  
  12V #2   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.188
  
  3.3V   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.138
  
  12V IO   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.188
  
  5V AUX   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.018
  
  3.3V AUX   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    3.285
  
  PCI 5V AUX   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.044
  
  PCI 3.3V   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.138
  
  PCI 2.5V   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.013
  
  PCI 5V   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    0.000
  
  XIO 12V BIAS <not present>
  
  XIO 5V <not present>
  
  XIO 2.5V <not present>
  
  XIO 3.3V AUX <not present>
  
  IP53 3.3V AUX <not present>
  
  IP53 5V AUX <not present>
  
  IP53 12V <not present>
  
  IP53 VCPU <not present>
  
  IP53 SRAM <not present>
  
  IP53 1.5V <not present>
  
  Description     State       Warning RPM  Current RPM
  
  --------------- ----------  -----------  -----------
  
  FAN  0  EXHST 1   Wait Pwr         1980            0
  
  FAN  1  EXHST 2   Wait Pwr         1980            0
  
  FAN  2       PS   Wait Pwr         3200            0
  
  FAN  3    PCI 1   Wait Pwr         1980            0
  
  FAN  4    PCI 2   Wait Pwr         1980            0
  
  Advisory   Critical   Fault      Current
  
  Description       State       Temp       Temp       Temp       Temp
  
  ----------------- ----------  ---------  ---------  ---------  ---------
  
  0 INTERFACE 0      Wait Pwr   50C/122F   54C/129F   58C/136F   24C/ 75F
  
  1 INTERFACE 1      Wait Pwr   50C/122F   54C/129F   58C/136F   24C/ 75F
  
  2 INTERFACE 2      Wait Pwr   50C/122F   54C/129F   58C/136F   24C/ 75F
  
  3 PCI RISER        Wait Pwr   50C/122F   54C/129F   58C/136F   24C/ 75F
  
  4 ODYSSEY        <not present>
  
  5 NODE           <not present>
  
  6 BEDROCK        <not present>

Code:

  001c01-L1>serial all
  
  001c01
  
  Data                            Location      Value
  
  ------------------------------  ------------  --------
  
  Local System Serial Number      NVRAM         M2005xxx
  
  Reference System Serial Number  Attached I/O  M2005xxx
  
  Local Brick Serial Number       EEPROM        NXRxxx
  
  Reference Brick Serial Number   NVRAM         NXRxxx
  
  EEPROM      Product Name    Serial         Part Number           Rev  T/W
  
  ----------  --------------  -------------  --------------------  ---  ------
  
  INTERFACE   2U_INT_53       NXRxxx         030_1809_006          C    00
  
  IO9         IO9             NYLxxx         030_1771_006          A    00
  
  ODYSSEY     no hardware detected
  
  RISER       2U_RISER        NWExxx         030_1808_006          C    00
  
  NODE        IP53_4CPU       NGAxxx         030_1959_002          B    00
  
  SNOWBALL    no hardware detected
  
  PS 1        no hardware detected
  
  PS 2        DPS-500EBE      XPD0601000375  060-0178-003          S4
  
  EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
  
  ---------- ------------------------ ------------------ ---- ------ --------
  
  DIMM 0     CE000000000000000C9B1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 2     CE000000000000000C9A1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 4     CE000000000000000CA21200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 6     CE000000000000000C9E1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 1     CE000000000000000CCE1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 3     CE000000000000000CCC1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 5     CE000000000000000CCA1200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  DIMM 7     CE000000000000000CD61200 M3 47L6423DT2-CA0   2D   10.0  N/A
  
  001e03
  
  Data                            Location      Value
  
  ------------------------------  ------------  --------
  
  Local System Serial Number      NVRAM         M2005xxx
  
  Reference System Serial Number  NVRAM         M2005xxx
  
  Local Brick Serial Number       EEPROM        NDLxxx
  
  Reference Brick Serial Number   NVRAM         NDLxxx
  
  EEPROM      Product Name    Serial         Part Number           Rev  T/W
  
  ----------  --------------  -------------  --------------------  ---  ------
  
  INTERFACE   2U_INT_53       NDLxxx         030_1809_004          A    00
  
  IO9         no hardware detected
  
  ODYSSEY     no hardware detected
  
  RISER       2U_RISER        NBJxxx         030_1808_005          A    00
  
  NODE        no hardware detected
  
  SNOWBALL    no hardware detected
  
  PS 1        no hardware detected
  
  PS 2        DPS-500EBE      XPD0342003505  060-0178-003          S3
  
  EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
  
  ---------- ------------------------ ------------------ ---- ------ --------
  
  DIMM 0     no hardware detected
  
  DIMM 2     no hardware detected
  
  DIMM 4     no hardware detected
  
  DIMM 6     no hardware detected
  
  DIMM 1     no hardware detected
  
  DIMM 3     no hardware detected
  
  DIMM 5     no hardware detected
  
  DIMM 7     no hardware detected

Code:

  001c01-L1>version
  
  L1 1.48.1 (Image B), Built 01/22/2007 11:34:34    [MIPS 2MB image]

Code:

  001c01-L1>cfg
  
  :0  - 001c01
  
  :1  - 001e03
  
  001c01-L1>link v
  
  port 'EXT II' appears okay (7)
  
  port 'PIC B' appears okay (7)
  
  port 'NODE NI' appears okay (1)
  
  port 'NODE II' appears okay (7)

Code:

  001e03-L1>version
  
  L1 1.38.10 (Image B), Built 08/03/2005 12:54:59    [MIPS 2MB image]
  
  Firmware Image B: Rev. 1.38.10, Built 08/03/2005 12:54:592:54:59

Code:

  001e03-L1>brick
  
  rack: 001, slot: 03, partition: none, type: 2UPX [2MB flash], serial:NDLxxx, source: EEPROM

Code:

  001e03-L1>pci
  
  Bus Slot Stat    Power Mode/Speed
  
  --- ---- ------- ----- -----------
  
  1    1 0x00 0c  7.5W PCIX 100MHz
  
  1    2 0x00 0f  none PCIX 100MHz
  
  2    1 0x00 01   15W PCI   33MHz
  
  2    2 0x00 0f  none PCI   33MHz

Code:

  001e03-L1>link v
  
  port 'EXT II' appears okay (1)
  
  port 'PIC B' appears okay (1)
  
  port 'NODE NI' <not present>
  
  port 'NODE II' <not present>

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

PymbleSoftware
Who joined July 15, 2008, 4:48 p.m.
and authored 1823 notes

Wrote the following at Nov. 18, 2011, 5:26 a.m...

Let me once again express my extreme envy.
Congratulations.

R.

_________________
死の神はりんごだけ食べる

アレゲはアレゲ以上のなにものでもなさげ -- アレゲ研究家

:Tezro:

J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.

Sold: :Indy:

Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Book ----> http://pymblesoftware.com/book/
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.

jan-jaap
Who joined June 17, 2004, 10:35 a.m.
and authored 3546 notes

Wrote the following at Nov. 18, 2011, 7:13 a.m...

Nice!

So a 2UPX module is really an expansion compute module without the (IP53_4CPU) node board, right?

Do these things grow on trees where you live ? :mrgreen:

_________________
Now this is a deep dark secret, so everybody keep it quiet

It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service:

(2x)

In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

recondas
Moderator
Who joined June 6, 2004, 4:55 p.m.
and authored 4835 notes

Wrote the following at Nov. 18, 2011, 7:37 a.m...

PymbleSoftware wrote:

Congratulations.

jan-jaap wrote:

Nice!

Thanks on both counts.

jan-jaap wrote:

So a 2UPX module is really an expansion compute module without the (IP53_4CPU) node board, right?

Sure looks like it to me:

Attachment:

2UPX-1.jpg [ 132.26 KiB | Viewed 579 times ]

Attachment:

2UPX-2.jpg [ 122.76 KiB | Viewed 579 times ]

Attachment:

2UPX-3.jpg [ 183.37 KiB | Viewed 579 times ]

Attachment:

2UPX-4.jpg [ 222.6 KiB | Viewed 579 times ]

jan-jaap wrote:

Do these things grow on trees where you live ? :mrgreen:

I wish - none of those that you've linked originated from a local source. This one actually came from Canada.

kais58
Who joined June 11, 2011, 8:04 p.m.
and authored 35 notes

Wrote the following at Nov. 18, 2011, 9:25 a.m...

That PCI Module looks exactly the same as the G brick inside, apart from the extra block where the V12 would go and presumably different slots on the side, interesting...

hamei
Who joined Feb. 24, 2004, 4:10 p.m.
and authored 8194 notes

Wrote the following at Nov. 18, 2011, 10:56 p.m...

kais58 wrote:

That PCI Module looks exactly the same as the G brick inside...

You mean G2 brick, I hope ...

kais58
Who joined June 11, 2011, 8:04 p.m.
and authored 35 notes

Wrote the following at Nov. 20, 2011, 10:30 a.m...

umm, yeah G2 Brick

recondas
Moderator
Who joined June 6, 2004, 4:55 p.m.
and authored 4835 notes

Wrote the following at June 21, 2012, 7:48 a.m...

Added a processor node board to formerly processorless 2UPX, creating an O350 Expansion Compute Module. The addition of the node board changed the L1 serial all from:

Code:

  001e03> serial all
  
  Data                            Location      Value
  
  ------------------------------  ------------  --------
  
  Local System Serial Number      NVRAM         M2005xxx
  
  Reference System Serial Number  NVRAM         M2005xxx
  
  Local Brick Serial Number       EEPROM        NDLxxx
  
  Reference Brick Serial Number   NVRAM         NDLxxx
  
  EEPROM      Product Name    Serial         Part Number           Rev  T/W
  
  ----------  --------------  -------------  --------------------  ---  ------
  
  INTERFACE   2U_INT_53       NDLxxx         030_1809_004          A    00
  
  IO9         no hardware detected
  
  ODYSSEY     no hardware detected
  
  RISER       2U_RISER        NBJxxx         030_1808_005          A    00
  
  NODE        no hardware detected
  
  SNOWBALL    no hardware detected
  
  PS 1        no hardware detected
  
  PS 2        DPS-500EBE      XPD0342003505  060-0178-003          S3
  
  EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
  
  ---------- ------------------------ ------------------ ---- ------ --------
  
  DIMM 0     no hardware detected
  
  DIMM 2     no hardware detected
  
  DIMM 4     no hardware detected
  
  DIMM 6     no hardware detected
  
  DIMM 1     no hardware detected
  
  DIMM 3     no hardware detected
  
  DIMM 5     no hardware detected
  
  DIMM 7     no hardware detected

to:

Code:

  001c03-L1>serial all
  
  Data                            Location      Value
  
  ------------------------------  ------------  --------
  
  Local System Serial Number      NVRAM         M2005xxx
  
  Reference System Serial Number  Attached C    M2005xxx
  
  Local Brick Serial Number       EEPROM        NDLxxx
  
  Reference Brick Serial Number   NVRAM         NDLxxx
  
  EEPROM      Product Name    Serial         Part Number           Rev  T/W
  
  ----------  --------------  -------------  --------------------  ---  ------
  
  INTERFACE   2U_INT_53       NDL537         030_1809_004          A    00
  
  IO9         no hardware detected
  
  ODYSSEY     no hardware detected
  
  RISER       2U_RISER        NBJ839         030_1808_005          A    00
  
  NODE        IP53_2CPU       RAG655         030_2029_001          D    00
  
  SNOWBALL    no hardware detected
  
  PS 1        no hardware detected
  
  PS 2        DPS-500EBE      XPD0342003505  060-0178-003          S3
  
  EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
  
  ---------- ------------------------ ------------------ ---- ------ --------
  
  DIMM 0     7F94FFFFFFFFFFFFC192301D SM57228DSGI100M    00FF   8.0  N/A
  
  DIMM 2     7F94FFFFFFFFFFFF3002301D SM57228DSGI100C2   00FF   8.0  N/A
  
  DIMM 4     no hardware detected
  
  DIMM 6     no hardware detected
  
  DIMM 1     7F94FFFFFFFFFFFFD002301D SM57228DSGI100C2   00FF   8.0  N/A
  
  DIMM 3     7F94FFFFFFFFFFFF5692301D SM57228DSGI100M    00FF   8.0  N/A
  
  DIMM 5     no hardware detected
  
  DIMM 7     no hardware detected

In my original post in this topic I included an hinv of the 2UPX NUMAlinked to a 4x800 O350 Base Compute Module. Here's the same hinv, but this time with the upgraded 2UPX:

Code:

  # hinv -vm
  
  Location: /hw/module/001c01/node
  
  IP53_4CPU Board: barcode NGA768     part 030-1959-002 rev -B
  
  Location: /hw/module/001c01/IXbrick/xtalk/15
  
  2U_INT_53 Board: barcode NXR118     part 030-1809-006 rev -C
  
  Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
  
  IO9 Board: barcode NYL142     part 030-1771-006 rev -A
  
  Location: /hw/module/001c03/node
  
  IP53_2CPU Board: barcode RAG655     part 030-2029-001 rev -D
  
  Location: /hw/module/001c03/IXbrick/xtalk/15
  
  2U_INT_53 Board: barcode NDL537     part 030-1809-004 rev -A
  
  Processor 0: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 2.2
  
  FPU: MIPS R16010 Floating Point Chip Revision: 2.2
  
  Processor 1: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 2.2
  
  FPU: MIPS R16010 Floating Point Chip Revision: 2.2
  
  Processor 2: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 2.2
  
  FPU: MIPS R16010 Floating Point Chip Revision: 2.2
  
  Processor 3: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 2.2
  
  FPU: MIPS R16010 Floating Point Chip Revision: 2.2
  
  Processor 4: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 3.0
  
  FPU: MIPS R16010 Floating Point Chip Revision: 3.0
  
  Processor 5: 800 MHZ IP35
  
  CPU: MIPS R16000 Processor Chip Revision: 3.0
  
  FPU: MIPS R16010 Floating Point Chip Revision: 3.0
  
  CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 1 at Module 001c01/Slot 0/Slice B: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 2 at Module 001c01/Slot 0/Slice C: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 3 at Module 001c01/Slot 0/Slice D: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 2.2. Scache: Size 8 MB Speed 400 Mhz  Tap 0xa
  
  CPU 4 at Module 001c03/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 3.0. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
  
  CPU 5 at Module 001c03/Slot 0/Slice C: 800 Mhz MIPS R16000 Processor Chip (enabled)
  
  Processor revision: 3.0. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
  
  Main memory size: 12288 Mbytes
  
  Instruction cache size: 32 Kbytes
  
  Data cache size: 32 Kbytes
  
  Secondary unified instruction/data cache size: 8 Mbytes
  
  Secondary unified instruction/data cache size: 8 Mbytes
  
  Secondary unified instruction/data cache size: 8 Mbytes
  
  Secondary unified instruction/data cache size: 8 Mbytes
  
  Secondary unified instruction/data cache size: 4 Mbytes
  
  Secondary unified instruction/data cache size: 4 Mbytes
  
  Memory at Module 001c01/Slot 0: 8192 MB (enabled)
  
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
  
  Memory at Module 001c03/Slot 0: 4096 MB (enabled)
  
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  
  Integral SCSI controller 3: Version QL12160, low voltage differential
  
  Integral SCSI controller 4: Version QL12160, low voltage differential
  
  Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  
  CDROM: unit 0 on SCSI controller 2
  
  Integral SCSI controller 0: Version QL12160, low voltage differential
  
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  
  Integral SCSI controller 1: Version QL12160, low voltage differential
  
  IOC3/IOC4 serial port: tty3
  
  IOC3/IOC4 serial port: tty4
  
  IOC3/IOC4 serial port: tty5
  
  IOC3/IOC4 serial port: tty6
  
  Gigabit Ethernet: tg1, module 001c03, PCI bus 1 slot 2 port 0
  
  Gigabit Ethernet: tg2, module 001c03, PCI bus 1 slot 2 port 1
  
  Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
  
  Iris Audio Processor: version MAD revision 1, number 1
  
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
  
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
  
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 2
  
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 1
  
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  
  PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 2
  
  IOC4 firmware revision 83
  
  IOC3/IOC4 external interrupts: 1
  
  HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
  
  HUB in Module 001c03/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
  
  IP35prom in Module 001c01/Slot n0: Revision 6.210
  
  IP35prom in Module 001c03/Slot n0: Revision 6.210

Though their union is destined to be short lived, after I add Odyssey graphics, the former 2UPX will going to a new home with another nekochan member.