The collected works of kais58

hinv -vm

Code: Select all

Location: /hw/module/001c12/node
IP53_4CPU Board: barcode NCF135     part 030-1868-001 rev -C
Location: /hw/module/001c12/CGbrick/xtalk/10
2U_INT_53 Board: barcode NDV777     part 030-1809-003 rev -B
Location: /hw/module/001c12/IXbrick/xtalk/15
2U_INT_53 Board: barcode NDM628     part 030-1809-003 rev -B
Location: /hw/module/001c12/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NEA076     part 030-1771-005 rev -A
Location: /hw/module/001c14/node
IP53_4CPU Board: barcode NCW007     part 030-1868-002 rev -A
Location: /hw/module/001c14/CGbrick/xtalk/10
2U_INT_53 Board: barcode NDL517     part 030-1809-003 rev -B
Location: /hw/module/001c14/IXbrick/xtalk/15
2U_INT_53 Board: barcode NEA464     part 030-1809-003 rev -B
Processor 0: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Processor 1: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Processor 2: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Processor 3: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Processor 4: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
Processor 5: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
Processor 6: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
Processor 7: 700 MHZ IP35
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c12/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c12/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 2 at Module 001c12/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 3 at Module 001c12/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 4 at Module 001c14/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 5 at Module 001c14/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 6 at Module 001c14/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 7 at Module 001c14/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
Main memory size: 16384 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c12/Slot 0: 8192 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001c14/Slot 0: 8192 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version Fibre Channel QL2310, 66 MHz PCI-X
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
ImageSync1 board: unit 0, version 1.10
Graphics board: SG2
Graphics board: SG2
Graphics board: SG2
Graphics board: SG2
Integral Gigabit Ethernet: tg0, module 001c12, PCI bus 1 slot 4
Iris Audio Processor: version RAD revision 13.0, number 1
PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1
PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x100c) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
PCI Adapter ID (vendor 0x1077, device 0x2300) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1
PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 2
IOC4 firmware revision 79
IOC3/IOC4 external interrupts: 1
HUB in Module 001c12/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c14/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c12/Slot n0: Revision 6.210
IP35prom in Module 001c14/Slot n0: Revision 6.210
USB controller: type OHCI
USB controller: type OHCI


* serial all

Code: Select all

001c12:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M-
Reference System Serial Number  Attached C    M-
Local Brick Serial Number       EEPROM        N-
Reference Brick Serial Number   NVRAM         N-


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   2U_INT_53       NDM628         030_1809_003          B    00
IO9         IO9             NEA076         030_1771_005          A    00
ODYSSEY     no hardware detected
RISER       2U_RISER        NEB595         030_1808_005          A    00
NODE        IP53_4CPU       NCF135         030_1868_001          C    00
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0351004641  060-0178-003          S4

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     7F7FFE000000000012002772 CM2201B1            2      8.0  N/A
DIMM 2     7F7FFE000000000012002789 CM2201B1            2      8.0  N/A
DIMM 4     7F7FFE00000000001200275E CM2201B1            2      8.0  N/A
DIMM 6     7F7FFE000000000012002760 CM2201B1            2      8.0  N/A
DIMM 1     7F7FFE000000000012002763 CM2201B1            2      8.0  N/A
DIMM 3     7F7FFE000000000012002777 CM2201B1            2      8.0  N/A
DIMM 5     7F7FFE000000000012002761 CM2201B1            2      8.0  N/A
DIMM 7     7F7FFE000000000012002764 CM2201B1            2      8.0  N/A

001v10:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M-
Reference System Serial Number  Attached C    M-
Local Brick Serial Number       EEPROM        N-
Reference Brick Serial Number   NVRAM         N-


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   2U_INT_53       NDV777         030_1809_003          B    00
IO9         no hardware detected
ODYSSEY     no hardware detected
RISER       2U_AGP_RISER    NBC580         030_1872_005          A    00
NODE        no hardware detected
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0351004880  060-0178-003          S4

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     no hardware detected
DIMM 2     no hardware detected
DIMM 4     no hardware detected
DIMM 6     no hardware detected
DIMM 1     no hardware detected
DIMM 3     no hardware detected
DIMM 5     no hardware detected
DIMM 7     no hardware detected

001c14:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M-
Reference System Serial Number  Attached C    M-
Local Brick Serial Number       EEPROM        N-
Reference Brick Serial Number   NVRAM         N-


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   2U_INT_53       NEA464         030_1809_003          B    00
IO9         no hardware detected
ODYSSEY     no hardware detected
RISER       2U_RISER        NBH778         030_1808_005          A    00
NODE        IP53_4CPU       NCW007         030_1868_002          A    00
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0351004734  060-0178-003          S4

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     7F7FFE0000000000120027C0 CM2201B1            2      8.0  N/A
DIMM 2     7F7FFE0000000000120027BC CM2201B1            2      8.0  N/A
DIMM 4     7F7FFE0000000000120027BF CM2201B1            2      8.0  N/A
DIMM 6     7F7FFE0000000000120027BB CM2201B1            2      8.0  N/A
DIMM 1     7F7FFE000000000012002765 CM2201B1            2      8.0  N/A
DIMM 3     7F7FFE000000000012002768 CM2201B1            2      8.0  N/A
DIMM 5     7F7FFE00000000001200276B CM2201B1            2      8.0  N/A
DIMM 7     7F7FFE000000000012002766 CM2201B1            2      8.0  N/A

001v16:

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         M-
Reference System Serial Number  Attached C    M-
Local Brick Serial Number       EEPROM        N-
Reference Brick Serial Number   NVRAM         N-


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   2U_INT_53       NDL517         030_1809_003          B    00
IO9         no hardware detected
ODYSSEY     no hardware detected
RISER       2U_AGP_RISER    NCG003         030_1872_005          A    00
NODE        no hardware detected
SNOWBALL    no hardware detected
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0351005693  060-0178-003          S4

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     no hardware detected
DIMM 2     no hardware detected
DIMM 4     no hardware detected
DIMM 6     no hardware detected
DIMM 1     no hardware detected
DIMM 3     no hardware detected
DIMM 5     no hardware detected
DIMM 7     no hardware detected


/usr/gfx/gfxinfo

Code: Select all

Graphics board 0 is "SG2" graphics.
Managed (":0.0") 1280x1024
Memory Size: 128 MB

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.02Hz (1280x1024)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  FLATRON LCD
Graphics board 1 is "SG2" graphics.
Managed (":0.1") 1280x1024
Memory Size: 128 MB

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  unknown
Graphics board 2 is "SG2" graphics.
Managed (":0.2") 1280x1024
Memory Size: 128 MB

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  unknown
Graphics board 3 is "SG2" graphics.
Managed (":0.3") 1280x1024
Memory Size: 128 MB

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  unknown


pci

Code: Select all

001c12-L1>* pci
001c12:
Bus Slot Slot Stat Bus Stat  Power Mode/Speed
--- ---- --------- --------- ----- ----------
1    1 0x90 0x01      0x04   15W PCI  66MHz
1    2 0xa7 0x00      0x04  7.5W PCI  66MHz
2    1 0x40 0x00      0x40  7.5W PCI  33MHz
2    2 0x04 0x00      0x40  7.5W PCI  33MHz
001v10:
INFO: command not supported on this brick type
001c14:
Bus Slot Slot Stat Bus Stat  Power Mode/Speed
--- ---- --------- --------- ----- ----------
1    1 0x10 0xf5      0xa4   15W PCIX 66MHz
1    2 0x27 0x0f      0xa4  none PCIX 66MHz
2    1 0xc4 0xff      0xc4  none PCI  66MHz
2    2 0xa4 0x0f      0xc4  none PCI  66MHz
001v16:
INFO: command not supported on this brick type

env

Code: Select all

001c12:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.79
12V <not present>
12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.30
12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.25
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.30
2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.50
5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
XIO 12V bias <not present>
XIO 5V <not present>
XIO 2.5V <not present>
XIO 3.3V aux <not present>
NODE0 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.25
NODE0 5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
NODE0 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
NODE0 CPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.24
NODE0 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.47
NODE0 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.48

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0  EXHST 1    Enabled         2160         2295
FAN 1  EXHST 2    Enabled         2160         2311
FAN 2       PS    Enabled         1575         2083
FAN 3    PCI 1    Enabled         2160         2616
FAN 4    PCI 2    Enabled         2160         2884

Advisory   Critical   Fault      Current
Description       State       Temp       Temp       Temp       Temp
----------------- ----------  ---------  ---------  ---------  ---------
0 INTERFACE 0       Enabled   31C/ 87F   48C/118F   55C/131F   16C/ 60F
1 INTERFACE 1       Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
2 INTERFACE 2       Enabled   31C/ 87F   48C/118F   55C/131F   19C/ 66F
3 PCI RISER         Enabled   31C/ 87F   48C/118F   55C/131F   19C/ 66F
4 ODYSSEY        <not present>
5 NODE              Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
6 BEDROCK           Enabled   31C/ 87F   48C/118F   55C/131F   14C/ 57F

001v10:
Environmental monitoring is enabled and running.
Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.79
12V <not present>
12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.34
12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.34
2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.52
5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.97
XIO 12V bias <not present>
XIO 5V <not present>
XIO 2.5V <not present>
XIO 3.3V aux <not present>
NODE0 3.3V aux <not present>
NODE0 5V aux <not present>
NODE0 12V <not present>
NODE0 CPU <not present>
NODE0 SRAM <not present>
NODE0 1.5V <not present>

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0  EXHST 1    Enabled         1350         1591
FAN 1       PS    Enabled         1575         1985
FAN 2    PCI 1    Enabled         1980         2250
FAN 3    PCI 2    Enabled         1980         2445

Advisory   Critical   Fault      Current
Description       State       Temp       Temp       Temp       Temp
----------------- ----------  ---------  ---------  ---------  ---------
0 INTERFACE 0       Enabled   50C/122F   54C/129F   58C/136F   32C/ 89F
1 INTERFACE 1       Enabled   50C/122F   54C/129F   58C/136F   35C/ 95F
2 INTERFACE 2       Enabled   50C/122F   54C/129F   58C/136F   27C/ 80F
3 PCI RISER         Enabled   50C/122F   54C/129F   58C/136F   28C/ 82F
4 ODYSSEY        <not present>
5 NODE           <not present>
6 BEDROCK        <not present>

001c14:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.79
12V <not present>
12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.00
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.04
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.50
5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
XIO 12V bias <not present>
XIO 5V <not present>
XIO 2.5V <not present>
XIO 3.3V aux <not present>
NODE0 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
NODE0 5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.02
NODE0 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.94
NODE0 CPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.24
NODE0 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.47
NODE0 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.48

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0  EXHST 1    Enabled         2160         2265
FAN 1  EXHST 2    Enabled         2160         2265
FAN 2       PS    Enabled         1575         2163
FAN 3    PCI 1    Enabled         2160         2481
FAN 4    PCI 2    Enabled         2160         2812

Advisory   Critical   Fault      Current
Description       State       Temp       Temp       Temp       Temp
----------------- ----------  ---------  ---------  ---------  ---------
0 INTERFACE 0       Enabled   31C/ 87F   48C/118F   55C/131F   16C/ 60F
1 INTERFACE 1       Enabled   31C/ 87F   48C/118F   55C/131F   17C/ 62F
2 INTERFACE 2       Enabled   31C/ 87F   48C/118F   55C/131F   20C/ 68F
3 PCI RISER         Enabled   31C/ 87F   48C/118F   55C/131F   18C/ 64F
4 ODYSSEY        <not present>
5 NODE              Enabled   31C/ 87F   48C/118F   55C/131F   17C/ 62F
6 BEDROCK           Enabled   31C/ 87F   48C/118F   55C/131F   14C/ 57F

001v16:


It's kinda buried in a corner so rather hard to get a good picture of it.
Thanks for the welcome and I'll take my camera with me when I go to the room later but there's not much else of it you can see, it's surrounded by tables and servers.
I registered on the wiki and as requested:
This is our only sgi machine so I can't compare it to any other and when I get the chance and everything is working properly on it, ie LDAP and nfs we will be seeing what it can do and I'll post screencaps then, though it does have a door on the rack, be we can't open it for the things in the way so I just took the panels out of the door to get to the CD drive.
I pulled one of the G bricks out today and have a treat for you.


That PCI Module looks exactly the same as the G brick inside, apart from the extra block where the V12 would go and presumably different slots on the side, interesting...
umm, yeah G2 Brick :)