Nekonomicon - Tezro, quad 700 MHz, 5 GB

japes
From Lynnwood, WA
Who joined Nov. 8, 2007, 4:35 p.m.

Wrote the following at May 4, 2014, 7:15 p.m...

I picked up a Tezro, it took a couple tries, but now I have one. It's not the prettiest, but it's not too ugly either.

The OS was panicing when I first had it on, and the console output was garbled or unresponsive. I've seen the L1 controller not turn on at first but turn on if I unplug and replug so I'm not sure if it has a hidden gremlin yet or not. At first it seemed to be when I plugged it into my USB-Serial adapter. Anyway, things I'll be keeping an eye on.

It had a stuck DVD drive so I replaced it with a new one from the recyclers for $2.00. I upgraded from 3 GB to 5 GB with memory I had on hand from building up my Origin 3000. I blame the 3k for my interest in the Fuel and now Tezro.

Code: Select all


   tezro 11# hinv -vm
   

   Location: /hw/module/001c01/node
   

   IP53_4CPU Board: barcode NCG813     part 030-1868-001 rev -C
   

   Location: /hw/module/001c01/IXbrick/xtalk/11
   

   WS_INT_53 Board: barcode NRT021     part 030-1881-007 rev -A
   

   Location: /hw/module/001c01/IXbrick/xtalk/12
   

   ASTODY Board: barcode MZD768     part 030-1726-004 rev -A
   

   Location: /hw/module/001c01/IXbrick/xtalk/15
   

   WS_INT_53 Board: barcode NRT021     part 030-1881-007 rev -A
   

   Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
   

   IO9 Board: barcode NSX575     part 030-1771-005 rev -B
   

   Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/1/1
   

   PCI_SIO_UFC Board: barcode MYJ735     part 030-1657-003 rev  A
   

   4 700 MHZ IP35 Processors
   

   CPU: MIPS R16000 Processor Chip Revision: 2.1
   

   FPU: MIPS R16010 Floating Point Chip Revision: 2.1
   

   CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
   

   Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
   

   CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
   

   Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
   

   CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
   

   Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
   

   CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
   

   Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
   

   Main memory size: 5120 Mbytes
   

   Instruction cache size: 32 Kbytes
   

   Data cache size: 32 Kbytes
   

   Secondary unified instruction/data cache size: 4 Mbytes
   

   Memory at Module 001c01/Slot 0: 5120 MB (enabled)
   

   Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
   

   Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
   

   Bank 2 contains 512 MB (Standard) DIMMS (enabled)
   

   Bank 3 contains 512 MB (Standard) DIMMS (enabled)
   

   Bank 4 contains 512 MB (Standard) DIMMS (enabled)
   

   Bank 5 contains 512 MB (Standard) DIMMS (enabled)
   

   Bank 6 contains 512 MB (Standard) DIMMS (enabled)
   

   Bank 7 contains 512 MB (Standard) DIMMS (enabled)
   

   Integral SCSI controller 3: Version LS1030, low voltage differential
   

   Integral SCSI controller 4: Version LS1030, low voltage differential
   

   Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
   

   Integral SCSI controller 0: Version QL12160, low voltage differential
   

   Disk drive: unit 1 on SCSI controller 0 (unit 1)
   

   Disk drive: unit 2 on SCSI controller 0 (unit 2)
   

   Integral SCSI controller 1: Version QL12160, low voltage differential
   

   IOC3/IOC4 serial port: tty3
   

   IOC3/IOC4 serial port: tty4
   

   IOC3/IOC4 serial port: tty5
   

   IOC3/IOC4 serial port: tty6
   

   Graphics board: V12
   

   Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
   

   Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 2
   

   Iris Audio Processor: version MAD revision 1, number 1
   

   PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 1
   

   PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 1
   

   PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
   

   PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2
   

   PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
   

   PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
   

   PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
   

   PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 2
   

   IOC4 firmware revision 83
   

   IOC3/IOC4 external interrupts: 1
   

   HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
   

   IP35prom in Module 001c01/Slot n0: Revision 6.172

l1 serial all

Code: Select all


   001c01-L1>serial all
   

   

   Data                            Location      Value
   

   ------------------------------  ------------  --------
   

   Local System Serial Number      NVRAM         P1003492
   

   Reference System Serial Number  NVRAM         P1003492
   

   Local Brick Serial Number       EEPROM        NRT021
   

   Reference Brick Serial Number   NVRAM         NRT021
   

   

   

   EEPROM      Product Name    Serial         Part Number           Rev  T/W
   

   ----------  --------------  -------------  --------------------  ---  ------
   

   INTERFACE   WS_INT_53       NRT021         030_1881_007          A    00
   

   IO9         IO9             NSX575         030_1771_005          B    00
   

   ODYSSEY     ASTODY          MZD768         030_1726_004          A    00
   

   SNOWBALL    SNOWBALL_EDGE   NBL525         030_1927_003          B    00
   

   NODE        IP53_4CPU       NCG813         030_1868_001          C    00
   

   IO DGHTR    CHWS_IO_DAUG    NJS160         030_1875_003          A    00
   

   

   EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
   

   ---------- ------------------------ ------------------ ---- ------ --------
   

   DIMM 0     CE000000000000000CF39D00 M3 46L2820DT2-CA0   2D   10.0  N/A
   

   DIMM 2     CE000000000000000C2CAC00 M3 47L6423DT3-CA0   3D   10.0  N/A
   

   DIMM 4     7F7FFE000000000012003BA5 CM2202B1            2     8.0  N/A
   

   DIMM 6     7F7FFE000000000012003BAB CM2202B1            2     8.0  N/A
   

   DIMM 1     CE000000000000000C4F9D00 M3 46L2820DT2-CA0   2D   10.0  N/A
   

   DIMM 3     CE000000000000000C20AC00 M3 47L6423DT3-CA0   3D   10.0  N/A
   

   DIMM 5     7F7FFE000000000012003B78 CM2202B1            2     8.0  N/A
   

   DIMM 7     7F7FFE000000000012003B44 CM2202B1            2     8.0  N/A

l1 pci

Code: Select all


   001c01-L1>pci
   

   

   Bus Slot Stat    Power Mode/Speed
   

   --- ---- ------- ----- -----------
   

   1    1 0x80 01   15W PCI   66MHz
   

   2    1 0x00 0f  none PCIX 100MHz
   

   2    2 0x00 0d   15W PCIX 100MHz
   

   2    3 0x00 0e   25W PCIX 100MHz
   

   3    1 0x00 00  7.5W PCI   33MHz
   

   3    2 0x00 0f  none PCI   33MHz
   

   4    1 0x80 01   15W PCI   66MHz
   

   4    2 0x80 0f  none PCI   66MHz

IO9/empty/gigE/dual-port u320 scsi
dual serial/empty/1gig FC/SNOWBALL-DM3

<--challenge S

japes
From Lynnwood, WA
Who joined Nov. 8, 2007, 4:35 p.m.

Wrote the following at May 4, 2014, 7:20 p.m...

Here's a photo, terrible choice of monitor (1680x1050), but I'll find a 1600x1200 panel for it later.

: Shot of the Tezro after unpacking at the office.

<--challenge S

ClassicHasClass
From Sunny So Cal
Who joined July 25, 2012, 7:12 p.m.

Wrote the following at May 4, 2014, 9:21 p.m...

Very nice. I hope the gremlins stay away. Skins look pretty good in that photograph.

smit happens.

:Fuel:

bigred , 800MHz R16K, 4GB RAM, V12, 6.5.30
:Indy:

indy , 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP:

purplehaze , R10000, Solid IMPACT
probably posted from

bruce , Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * HP C8000 * BeBox * Solbourne S3000 * Commodore 128 * many more...

recondas
Moderator
From NC - USA
Who joined June 6, 2004, 5:55 p.m.

Wrote the following at May 5, 2014, 5:55 p.m...

Congrats japes - nice Tezro.

***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

jmestrada
Who joined April 13, 2014, 7:29 p.m.

Wrote the following at May 5, 2014, 6:41 p.m...

Very nice! I've been eyeballing one on eBay myself... Just picked up an Octane2 in real good shape. Think my wife would choke me out if I bought another workstation! LOL

Systems:

(400MHz R12K, 1GB RAM, 73GB HDD), :Octane2:

(600MHz R14K, 2GB RAM, 146GB & 2x73GB HDD, V12)

ClassicHasClass
From Sunny So Cal
Who joined July 25, 2012, 7:12 p.m.

Wrote the following at May 6, 2014, 7 a.m...

I've been tempted a lot by the Tez but my limitation is space, heat and noise. The G5 is already pretty damn hot and noisy when it wants to be, and the Tez is much fatter.

smit happens.

:Fuel:

bigred , 800MHz R16K, 4GB RAM, V12, 6.5.30
:Indy:

indy , 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP:

purplehaze , R10000, Solid IMPACT
probably posted from

bruce , Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * HP C8000 * BeBox * Solbourne S3000 * Commodore 128 * many more...

japes
From Lynnwood, WA
Who joined Nov. 8, 2007, 4:35 p.m.

Wrote the following at May 16, 2014, 6:26 p.m...

Tezro idles at about 340 watts with two 15k drives.