SGI: hinv

Tezro: 4x700mhz | 8GB | DCD | V12 | SAS | FIBER

Scored a Tezro finally!

hinv:

Code: Select all

Location: /hw/module/001c01/node
IP53_2CPU Board: barcode NER821     part 030-1869-001 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/11
WS_INT_53 Board: barcode NAS082     part 030-1881-006 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/12
ODY128B1_2 Board: barcode NAT284     part 030-1884-002 rev -D
Location: /hw/module/001c01/IXbrick/xtalk/15
WS_INT_53 Board: barcode NAS082     part 030-1881-006 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NGN490     part 030-1771-005 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/1/3
PCI_SIO_UFC Board: barcode MTN726     part 030-1657-003 rev  A
2 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 8192 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
Integral SCSI controller 5: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
Integral SCSI controller 4: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
Integral SCSI controller 6: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 7: Version SAS/SATA LS1064
Disk drive: unit 0 on SCSI controller 7 (unit 0)
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Graphics board: V12
Gigabit Ethernet: tg1, module 001c01, PCI bus 3 slot 2
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
Iris Audio Processor: version RAD revision 13.0, number 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1
PCI Adapter ID (vendor 0x1000, device 0x0050) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
Dual Channel Display
IP35prom in Module 001c01/Slot n0: Revision 6.210


Things to do:
[list=]
Migrate as much data to my SSD
Swap my Quad 700mhz O350 Board into the Tezro
[/list]

2.18.2013
Swapped out the Origin 350 Quad 700 R16k nodeboard into the Tezro (though I gotta reseat/enableall/etc Bank 0 and 1 as they are disabled):

Code: Select all

[chimera]:/ $ hinv -vm
Location: /hw/module/001c01/node
IP53_4CPU Board: barcode MZY234     part 030-1868-001 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/11
WS_INT_53 Board: barcode NAS082     part 030-1881-006 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/11/pci-x/1/1
PCI_SIO_UFC Board: barcode MTN726     part 030-1657-003 rev  A
Location: /hw/module/001c01/IXbrick/xtalk/12
ODY128B1_2 Board: barcode NAT284     part 030-1884-002 rev -D
Location: /hw/module/001c01/IXbrick/xtalk/15
WS_INT_53 Board: barcode NAS082     part 030-1881-006 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NGN490     part 030-1771-005 rev -A
4 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
Main memory size: 6144 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 6144 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (disabled)
Bank 1 contains 1024 MB (Premium) DIMMS (disabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
Integral SCSI controller 4: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 7: Version SAS/SATA LS1064
Disk drive: unit 0 on SCSI controller 7 (unit 0)
Integral SCSI controller 8: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
Integral SCSI controller 9: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Graphics board: V12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Iris Audio Processor: version RAD revision 13.0, number 2
Iris Audio Processor: version MAD revision 1, number 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
PCI Adapter ID (vendor 0x1000, device 0x0050) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 3
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 3
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
Dual Channel Display
IP35prom in Module 001c01/Slot n0: Revision 6.210


2.12.2014 - Swapped out the Quad R16000 700mhz 4mb Cache nodeboard for a Quad R16000 700mhz 8mb Cache nodeboard:

Code: Select all

$ hinv -v
4 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.1. Scache: Size 8 MB Speed 350 Mhz  Tap 0xa
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Congratulations!
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
cool!
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!
Thanks! Just swapped out the Origin 350 nodeboard into the Tezro, 0 issues.
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Could you please run some disk benchmark:
mkfile 4g testfile
diskperf -W -D -r 4k -m 4m testfile

Thanks!
:Onyx2:
mia wrote: Could you please run some disk benchmark:
mkfile 4g testfile
diskperf -W -D -r 4k -m 4m testfile

Thanks!


Here you go:

Code: Select all

#---------------------------------------------------------
# Disk Performance Test Results Generated By Diskperf V1.2
#
# Test name     : Unspecified
# Test date     : Mon Feb 18 20:18:27 2013
# Test machine  : IRIX64 chimera 6.5 07202013 IP35
# Test type     : XFS data subvolume
# Test path     : testfile
# Request sizes : min=4096 max=4194304
# Parameters    : direct=1 time=10 scale=1.000 delay=0.000
# XFS file size : 4294967296 bytes
#---------------------------------------------------------
# req_size  fwd_wt  fwd_rd  bwd_wt  bwd_rd  rnd_wt  rnd_rd
#  (bytes)  (MB/s)  (MB/s)  (MB/s)  (MB/s)  (MB/s)  (MB/s)
#---------------------------------------------------------
4096   32.14   29.53   33.01   31.65   31.86   16.40
8192   56.73   53.78   57.66   55.81   57.27   29.94
16384   94.73   89.60   93.78   90.82   94.64   54.61
32768  136.63  129.35  137.84  132.01  138.45   92.24
65536  178.00  171.92  180.03  172.49  177.35  140.61
131072  209.83  204.63  210.00  200.39  209.91  184.70
262144  231.29  227.91  231.66  222.42  231.07  216.19
524288  243.72  245.93  244.54  245.02  245.67  242.08
1048576  251.05  260.09  252.72  258.85  251.44  257.32
2097152  255.59  267.22  254.93  265.70  254.63  264.64
4194304  255.84  270.00  256.38  269.60  256.06  269.12
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
thanks a lot!
:Onyx2:
Do you have more ssds to try on? This one is an old generation...
:Onyx2:
mia wrote: thanks a lot!


No problem!

For comparison, the Maxtor Atlas II 15k 73gb I have in there too:

Code: Select all

#---------------------------------------------------------
# Disk Performance Test Results Generated By Diskperf V1.2
#
# Test name     : Unspecified
# Test date     : Mon Feb 18 20:50:19 2013
# Test machine  : IRIX64 chimera 6.5 07202013 IP35
# Test type     : XFS data subvolume
# Test path     : testfile
# Request sizes : min=4096 max=4194304
# Parameters    : direct=1 time=10 scale=1.000 delay=0.000
# XFS file size : 4294967296 bytes
#---------------------------------------------------------
# req_size  fwd_wt  fwd_rd  bwd_wt  bwd_rd  rnd_wt  rnd_rd
#  (bytes)  (MB/s)  (MB/s)  (MB/s)  (MB/s)  (MB/s)  (MB/s)
#---------------------------------------------------------
4096    1.01   21.55    1.03   11.98    0.94    1.06
8192    1.98   37.81    2.09   19.16    1.83    2.08
16384    3.88   61.12    4.29   21.82    3.58    3.93
32768    7.35   79.99    9.01   28.53    6.84    7.45
65536   16.79   80.22   20.83   32.21   12.43   13.34
131072   29.85   80.35   25.93   36.82   20.97   21.82
262144   38.93   80.65   39.97   44.74   32.33   32.76
524288   52.96   52.28   51.61   50.41   44.06   45.04
1048576   58.50   60.16   59.73   60.38   54.05   54.65
2097152   66.66   69.55   64.20   68.28   62.26   65.58
4194304   70.01   73.43   69.30   72.39   67.94   70.47
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Great, thank you for taking the time, I was hoping you might also have some more recent SSDs?
:Onyx2:
mia wrote: Great, thank you for taking the time, I was hoping you might also have some more recent SSDs?


I just got a pair of the new 128gb Samsung 840 Pros, but those went into my primary PC. I have a pair of Corsair Force GT 90s I could benchmark (the Samsung's replaced these) and a OCZ Vertex 4. If I get some time this week after work I'll benchmark the others, but it may take until Saturday to do.
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Adrenaline wrote: I just got a pair of the new 128gb Samsung 840 Pros, but those went into my primary PC. I have a pair of Corsair Force GT 90s I could benchmark (the Samsung's replaced these) and a OCZ Vertex 4. If I get some time this week after work I'll benchmark the others, but it may take until Saturday to do.


Wow, I'd really like to see how the Vertex4 performs, especially compared to the Corsair and Samsung. Thank you for benchmarking those, this is seriously great.
:Onyx2:
ping!
:Onyx2:
mia wrote: ping!


I did not forget, definitely looks to be a Saturday morning thing. Got the wonderful task of revamping an enterprise iOS app I did about a year ago to match feature by feature of the recent Windows Phone app I did. Which in itself isn't fun, but only having until end of day Friday to wrap it up coupled with ASP.NET bugs in legacy systems, my week isn't going to be much fun :(
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Any luck!?
:Onyx2:
Finally had some time to swap the nodeboard for the 8mb cache variant - will post benchmark comparisons sometime soon.
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL