SGI: hinv

Onyx300 IR3 | 16x600MHz | 10GB | 4xRM10 | DG5-2/TVO

recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at May 19, 2008, 4:57 p.m...
EDIT: An updated hinv is on page 4 .

Code:
fyrestorm 1% hinv -vm
Location: /hw/module/001c01/node
IP45_4CPU Board: barcode MMB342     part 030-1797-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/11
KTOWN2 Board: barcode LZP881     part 030-1593-001 rev  G
GE16-4 Board: barcode GMX327     part 030-1398-001 rev  A
Location: /hw/module/001c01/Ibrick/xtalk/14
IO8 Board: barcode MLZ524     part 030-1673-003 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/15
IO8 Board: barcode MLZ524     part 030-1673-003 rev -G
4 600 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 2 at Module 001c01/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 3 at Module 001c01/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 3: Version SAS/SATA LS1068
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 4 on SCSI controller 1
Tape drive: unit 6 on SCSI controller 1: DAT
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Graphics board: InfiniteReality2E
Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 2
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: USB audio revision 1.0, number 0
PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.211
USB controller: type OHCI
USB Human Interface Device: device id 0 type mouse
USB Human Interface Device: device id 0 type keyboard


Code:
2% /usr/gfx/gfxinfo -v
Graphics board 0 is "KONAD" graphics.
Managed (":0.0") 1280x1024
Display has 2 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
4 RM9 boards (of 4) 1/1/1/1
Texture Memory: 64MB/64MB/64MB/64MB
Extra-Large pixel depth
32K cmap
DPLEX option detected
brd: 80f61806 3020c06/3020c06/3020c06/3020c06 f9211002
ge: 0 14832057 24731057 14231057
rm0: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
rm1: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
rm2: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
rm3: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
dg: 05532057
5838057 1/1/1/1
5631057 1/1
GE:   NIC #:      0000.002a.e59b (family: 0b)
Serial #:   GMX327
Part #:     030-1398-001
KT:   NIC #:      0000.003f.d1c6 (family: 0b)
Serial #:   LZP881
Part #:     030-1593-001
RM0:  NIC #:      0000.002e.7841 (family: 0b)
Serial #:   GCA321
Part #:     030-1402-001
TM0:  NIC #:      0000.001e.af8b (family: 0b)
Serial #:   DEM892
Part #:     030-1053-001
RM1:  NIC #:      0000.002e.794d (family: 0b)
Serial #:   GCA323
Part #:     030-1402-001
TM1:  NIC #:      0000.002e.687f (family: 0b)
Serial #:   GCA060
Part #:     030-1053-001
RM2:  NIC #:      0000.002e.4c37 (family: 0b)
Serial #:   GCA342
Part #:     030-1402-001
TM2:  NIC #:      0000.002e.7730 (family: 0b)
Serial #:   GBZ682
Part #:     030-1053-001
RM3:  NIC #:      0000.002e.48e8 (family: 0b)
Serial #:   GCC332
Part #:     030-1402-001
TM3:  NIC #:      0000.0024.0094 (family: 0b)
Serial #:   DGN848
Part #:     030-1053-001
BP:   No NIC serial number available.
DG:   NIC #:      0000.0037.6cf2 (family: 0b)
Serial #:   HKA950
Part #:     030-1242-001
DGOPT:NIC #:      0000.0037.69b1 (family: 0b)
Serial #:   HKA905
Part #:     030-1409-001
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
Video Format Flags:  (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
Channel 1:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
Video Format Flags:  (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
Channel 2 (physical port 222):
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0


Code:
fyrestorm 1# configmon -h
SEQ            NAME      LOCATION          SERIAL_NUM   PART_NUMBER  REVISION
===============================================================================
0              NA            NA                  NA            NA        NA
1   MODULE_001c01            NA                  NA            NA        NA
2              L1        001c01                  NA            NA        NA
3       IP45_4CPU        001c01              MMB342  030-1797-001        -B
4       MEMBANK_0        001c01                  NA            NA        NA
5       MEMBANK_1        001c01                  NA            NA        NA
6       MEMBANK_2        001c01                  NA            NA        NA
7       MEMBANK_3        001c01                  NA            NA        NA
8          R14000        001c01                  NA            NA        NA
9          R14000        001c01                  NA            NA        NA
10          R14000        001c01                  NA            NA        NA
11          R14000        001c01                  NA            NA        NA
12              NA        001c01                  NA            NA        NA
13             IO8        001c01              MLZ524  030-1673-003        -G
14          GE16-4      XTALK_11              GMX327  030-1398-001         A
15          KTOWN2      XTALK_11              LZP881  030-1593-001         G
16             RM9      XTALK_11              GCC332  030-1402-001         A
17          TM7-64      XTALK_11              DGN848  030-1053-001         F
18             RM9      XTALK_11              GCA342  030-1402-001         A
19          TM7-64      XTALK_11              GBZ682  030-1053-001         F
20             RM9      XTALK_11              GCA323  030-1402-001         A
21          TM7-64      XTALK_11              GCA060  030-1053-001         F
22           DG5-2      XTALK_11              HKA927  030-1242-001         F
23           DPLEX      XTALK_11              HKA901  030-1409-001         D
24             IO8      XTALK_14              MLZ524  030-1673-003        -G
25     SCSI_CTLR_3            NA                  NA            NA        NA
26     SCSI_CTLR_0            NA                  NA            NA        NA
27         DRIVE_1            NA            3HX08B49    ST336753LC      0005
28         DRIVE_2            NA            3HX06XY9    ST336753LC      0005
29     SCSI_CTLR_1            NA                  NA            NA        NA
30         CDROM_4            NA                  NA            NA        NA
31          TAPE_6            NA                  NA            NA        NA
32    ETHERNET_EF0            NA                  NA            NA        NA
===============================================================================


Code:
4% diskpatch -v
sc0d1l0:  Disk         SEAGATE ST336753LC      0005  Serial: 3HX08xxx
sc0d2l0:  Disk         SEAGATE ST336753LC      0005  Serial: 3HX08xxx


Code:
l2cmd env
001c01:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
12V DIG    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.97
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.32
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.97
3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.41
2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.50
Speedo2 CPU    Enabled  10%   1.44/  1.76  20%   1.28/  1.92    1.58
1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.48

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0     LEFT    Enabled         2160         3924
FAN 1   CENTER    Enabled         2160         4017
FAN 2    RIGHT    Enabled         2160         4066
FAN 3       PS    Enabled         2160         3276
FAN 4      PS'    Enabled         2160         4383

Advisory   Critical   Fault      Current
Description    State       Temp       Temp       Temp       Temp
-------------- ----------  ---------  ---------  ---------  ---------
NODE 0            Enabled   40C/104F   46C/114F   49C/120F   25C/ 77F
NODE 1            Enabled   40C/104F   46C/114F   49C/120F   24C/ 75F

001g02:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.07
3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.34

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0   BLOWER    Enabled         1080         1476

Advisory   Critical   Fault      Current
Description    State       Temp       Temp       Temp       Temp
-------------- ----------  ---------  ---------  ---------  ---------
L1                Enabled   30C/ 86F   35C/ 95F   40C/104F   23C/ 73F
Attachment:
Onyx300.jpg

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
nekonoko avatar
nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7947 notes
Wrote the following at May 19, 2008, 5:46 p.m...
The beast lives! Great to see Wadatsumi in action again :)

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.
bplaa.yai avatar
bplaa.yai
Who joined March 26, 2008, 7:04 p.m.
and authored 302 notes
Wrote the following at May 19, 2008, 6:12 p.m...
Can't wait to see its other half alive again ;)

Code:
2% /usr/gfx/gfxinfo -v
Graphics board 0 is "KONAD" graphics.

KONAD gfx ? What kind of setup is that ? a G brick ?

_________________
:Onyx2: :Fuel: :1600SW: :O2: :0300: :0300:
maxsleg avatar
maxsleg
Who joined April 4, 2007, 6:56 a.m.
and authored 1461 notes
Wrote the following at May 20, 2008, 6:36 a.m...
If you look at the configmon you can see it is a GE16, RM9, DG5 => IR2E so would be in a graphics brick.

Nice setup!

_________________
:ChallengeL: :O2000: :Onyx2: :Onyx: :O2000R: :O2000R: :O2000E: :O2000E: :Onyx2R: :O3000: :0300: :0300: :0300: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane2: :Octane2: :Fuel: :Fuel:
recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at July 20, 2008, 10:44 p.m...
Added sound:
Code:
Iris Audio Processor: USB audio revision 1.0, number 0
a.k.a. the Griffin iMic - it was plug and play <no need to edit ioconfig>. Since there was no sound during the original IRIX install, I did have to set the chkconfig "soundscheme" flag "on" to enable the typical IRIX desktop sounds.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
hamei
Who joined Feb. 25, 2004, 12:10 a.m.
and authored 8549 notes
Wrote the following at Aug. 8, 2008, 3:35 a.m...
recondas wrote:
Added sound:
Code:
Iris Audio Processor: USB audio revision 1.0, number 0
a.k.a. the Griffin iMic - it was plug and play <no need to edit ioconfig>.

Jeeze, wreck .... graphics from Cinerama Holiday but sound from the Jazz Singer. Bleugh ! Let's put some real sound in it !
nekonoko avatar
nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7947 notes
Wrote the following at Aug. 8, 2008, 5:17 p.m...
I think his PCI slots are full ;)

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.
recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at Aug. 11, 2008, 10:41 p.m...
hamei wrote:
Jeeze, wreck .... graphics from Cinerama Holiday but sound from the Jazz Singer. Bleugh ! Let's put some real sound in it !
Even the Jazz Singer don't sound too bad when he's singing in an 8x10 room accompanied by the fan in a G-brick :)

I actually have one of the compatible PCI sound boards, but neko hit the nail on the head - there only *two* PCI slots in an O300. Right now that's a GigE and an FC board <tho I'm watching for one of the SATA boards>.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
hamei
Who joined Feb. 25, 2004, 12:10 a.m.
and authored 8549 notes
Wrote the following at Aug. 12, 2008, 2:50 a.m...
recondas wrote:
[... - there only *two* PCI slots in an O300.

I thought there was an option to put 16 (or was it 64 ?) pci slots in an origin 3-series ? Maybe you need that :)
bigD avatar
bigD
Who joined June 18, 2008, 3:38 a.m.
and authored 410 notes
Wrote the following at Aug. 12, 2008, 3:37 a.m...
::drool::

_________________
:Onyx2: :Fuel: :Indigo2: :Indigo2IMP: :O3x0:
recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at Aug. 12, 2008, 11:06 a.m...
hamei wrote:
I thought there was an option to put 16 (or was it 64 ?) pci slots in an origin 3-series ?

I've seen O3xxx P-Bricks make the occasional appearance on eBay, but unfortunately the the P-Brick isn't compatible with the Origin 3xx. The Origin 3xx requires a PCI expansion module. If there have been any PCI Expansion Modules available recently <at less than corporate level pricing>, I've missed them. Then there's the whole L1 serial security issue to deal with.

O300 PCI Expansion modules probably rare enough that it'd be easier to pick up a few more PCI slots via the purchase of a second O300.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
nekonoko avatar
nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7947 notes
Wrote the following at Aug. 12, 2008, 4:13 p.m...
recondas wrote:
O300 PCI Expansion modules probably rare enough that it'd be easier to pick up a few more PCI slots via the purchase of a second O300.


Absolutely - that's essentially my reasoning when I went with a second dual CPU O300. Gave me a couple extra slots plus additional RAM for comparatively little cash. The extra CPUs weren't bad either ;)

The O350 is a pretty nice step up in that you get three open PCI slots per brick, plus you have on-board gigabit ethernet which saves a slot. If you have two O350s and are starved for slots, you can optionally remove the second IO9 - this gives you a total of seven free PCI slots in just two bricks.

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.
recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at March 12, 2009, 6:44 p.m...
Updated the hinv to include an SAS adapter. Installed it, fired up the system and saw the following scroll by in the start-up console:
Code:
NOTICE: /hw/module/001c01/Ibrick/xtalk/14/pci/1/scsi_ctlr/0:  1064 SAS/SATA firmware version 1.26.0.0

I've got an SATA DVD-RW, as soon as I pick up some SATA hard drive(s) and a suitable external enclosure I'll post an update.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
nekonoko avatar
nekonoko
Site Admin
Who joined Jan. 23, 2003, 9:31 a.m.
and authored 7947 notes
Wrote the following at March 17, 2009, 6:51 a.m...
Cool! Went for the 4-port model then?

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.
recondas avatar
recondas
Moderator
Who joined June 7, 2004, 12:55 a.m.
and authored 4944 notes
Wrote the following at March 17, 2009, 4:47 p.m...
One bidder bought up the remaining supply of those $45 8-ports you found. If more show up in the future, I'll get one and move the 4-port into an Intel server <where there's lots of room for internal devices>.
---------------------------------------------------------------

EDIT: Installed an 8-port SAS3442X. Where the syslog once read
Code:
NOTICE: /hw/module/001c01/Ibrick/xtalk/14/pci/1/scsi_ctlr/0:  1064 SAS/SATA firmware version 1.26.0.0
it now reads
Code:
NOTICE: /hw/module/001c01/Ibrick/xtalk/14/pci/1/scsi_ctlr/0:  1068 SAS/SATA firmware version 0.6.9.0

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************