SGI: hinv

Onyx2: 24CPU: 8 x 500 MHz 16 x 400 MHz 37Gb of RAM.

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at Dec. 3, 2007, 12:53 a.m...

Edit: New hinv will be posted further down this thread..


4 400 MHZ IP27 Processors


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Location: /hw/module/1/slot/n1/node/cpubus/0/a


CPU 0 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa


Location: /hw/module/1/slot/n1/node/cpubus/0/b


CPU 1 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa


Location: /hw/module/1/slot/n2/node/cpubus/0/a


CPU 2 at Module 1/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa


Location: /hw/module/1/slot/n2/node/cpubus/0/b


CPU 3 at Module 1/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa


Main memory size: 4096 Mbytes


Instruction cache size: 32 Kbytes


Data cache size: 32 Kbytes


Secondary unified instruction/data cache size: 8 Mbytes


Location: /hw/module/1/slot/n1/node/memory


Memory at Module 1/Slot 1: 2048 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Location: /hw/module/1/slot/n2/node/memory


Memory at Module 1/Slot 2: 2048 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Location: /hw/module/1/slot/r2/router


ROUTER in Module 1/Slot 2: Revision 2: Active Ports [6] (enabled)


Location: /hw/module/1/slot/r1/router


ROUTER in Module 1/Slot 1: Revision 2: Active Ports [4,5,6] (enabled)


Integral SCSI controller 3: Version QL1040B (rev. 2), differential


Integral SCSI controller 2: Version QL1040B (rev. 2), differential


Integral SCSI controller 4: Version QL1040B (rev. 2), differential


Integral SCSI controller 5: Version QL1040B (rev. 2), differential


Integral SCSI controller 6: Version Fibre Channel AIC-1160, revision 2


Disk drive: unit 91 on SCSI controller 6 (unit 91)


Disk drive: unit 92 on SCSI controller 6 (unit 92)


Disk drive: unit 93 on SCSI controller 6 (unit 93)


Disk drive: unit 94 on SCSI controller 6 (unit 94)


Disk drive: unit 96 on SCSI controller 6 (unit 96)


Disk drive: unit 97 on SCSI controller 6 (unit 97)


Disk drive: unit 98 on SCSI controller 6 (unit 98)


Integral SCSI controller 0: Version QL1040B (rev. 2), single ended


Disk drive: unit 1 on SCSI controller 0 (unit 1)


Disk drive: unit 2 on SCSI controller 0 (unit 2)


Integral SCSI controller 1: Version QL1040B (rev. 2), single ended


Disk drive: unit 4 on SCSI controller 1 (unit 4)


Disk drive: unit 5 on SCSI controller 1 (unit 5)


Integral SCSI controller 7: Version Fibre Channel AIC-1160, revision 2


Disk drive: unit 1 on SCSI controller 7 (unit 1)


Disk drive: unit 2 on SCSI controller 7 (unit 2)


Disk drive: unit 3 on SCSI controller 7 (unit 3)


Disk drive: unit 4 on SCSI controller 7 (unit 4)


Disk drive: unit 5 on SCSI controller 7 (unit 5)


Disk drive: unit 6 on SCSI controller 7 (unit 6)


Disk drive: unit 7 on SCSI controller 7 (unit 7)


Disk drive: unit 8 on SCSI controller 7 (unit 8)


IOC3/IOC4 serial port: tty1


IOC3/IOC4 serial port: tty2


IOC3/IOC4 serial port: tty3


IOC3/IOC4 serial port: tty4


IOC3 parallel port: plp1


Graphics board: InfiniteReality3


Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2


Gigabit Ethernet: eg0, module 1, PCI slot 2, firmware version 12.4.10


Iris Audio Processor: version RAD revision 7.0, number 1


Origin MSCSI board, module 1 slot 8: Revision 4


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3


Origin BASEIO board, module 1 slot 1: Revision 3


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2


Origin FIBRE CHANNEL board, module 1 slot 9: Revision 4


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7


Origin PCI XIO board, module 1 slot 2: Revision 4


PCI Adapter ID (vendor 0x133d, device 0x0001) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2


DIVO Video: controller 0 unit 0: Input, Output


IOC3/IOC4 external interrupts: 1


Location: /hw/module/1/slot/n1/node/hub


HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)


Location: /hw/module/1/slot/n2/node/hub


HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)


Location: /hw/module/1/slot/n1/node/prom


IP27prom in Module 1/Slot n1: Revision 6.156


Location: /hw/module/1/slot/n2/node/prom


IP27prom in Module 1/Slot n2: Revision 6.156


Location: /hw/module/1/slot/io1/baseio


IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

recondas
Moderator
From NC - USA
Who joined June 6, 2004, 5:55 p.m.

Wrote the following at Dec. 3, 2007, 2:13 a.m...

Congratulations Regan - that's a *very* nice Onyx2. Lot's of video I/O there - in addition to the DIVO, it looks like you've got a DG5-2 with the GVO option.

If you get a chance, consider adding "gfxinfo -v" and "configmon -h"

***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

SupremeCmdr
From Sydney, Australia
Who joined March 1, 2006, 1:38 a.m.

Wrote the following at Dec. 4, 2007, 2:10 a.m...

Nice.

Is that the ebay one from a week or so ago?

Apple Unibody MBP 2.66Ghz, 8Gb OSX 10.6
Apple MacMini 1.83Ghz, 1Gb OSX 10.5
Apple Power Mac Cube 450Mhz, 256Mb, OSX 10.3 Sweet!
Sun Ultra10 440Mhz 1Gb, SunOS 5.10

http://gothmog.homeunix.net/blog

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at Dec. 4, 2007, 2:15 a.m...

SupremeCmdr wrote: Nice.

Is that the ebay one from a week or so ago?

yup, if you hadn't sent me the link...

Drop by when I get it going..

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

Arti77
From Melbourne, Australia
Who joined April 27, 2005, 2:40 a.m.

Wrote the following at Dec. 6, 2007, 2:26 a.m...

Awesome machine Regan! Wish I lived closer

What are you going to do with it? Seems like it was a Video Editing Machine.

My gear:

R10k 180mhz, 128mb, 36gb
:Indy:

R5k 150SC, 128mb, 9g
:Indigo2:

Teal, 256mb, 18GB, Extreme

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at Dec. 6, 2007, 4:31 a.m...

Arti77 wrote: Awesome machine Regan! Wish I lived closer What are you going to do with it? Seems like it was a Video Editing Machine.

Yup, used to be an Inferno suite... I used to work across the road from them when they were making Christmas Cocoa Cola Polar Bear type TV commercials...
I haven't fully decided what I will do with it but a couple of things comes to mind.. (google MPI povray) and http://public.kitware.com/VTK/ and one or two other things...
If you are ever up this way, pm me and drop by... I still owe you a little... from way back when..

Dont worry there is an even better machine an Origin3800 as in here:
viewtopic.php?f=4&t=16317

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

Arti77
From Melbourne, Australia
Who joined April 27, 2005, 2:40 a.m.

Wrote the following at Dec. 6, 2007, 2:20 p.m...

Pity I don't have 15 Grand lying around

My gear:

R10k 180mhz, 128mb, 36gb
:Indy:

R5k 150SC, 128mb, 9g
:Indigo2:

Teal, 256mb, 18GB, Extreme

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at Jan. 20, 2008, 10:35 p.m...

recondas wrote: Congratulations Regan - that's a *very* nice Onyx2. Lot's of video I/O there - in addition to the DIVO, it looks like you've got a DG5-2 with the GVO option.

If you get a chance, consider adding "gfxinfo -v" and "configmon -h"

As you wish:

Code: Select all


cortex 3# /usr/gfx/gfxinfo -v


Graphics board 0 is "KONAL" graphics.


Managed (":0.0") 1920x1200


Display has 2 channels


4 GEs (of 4), occmask = 0x0f


4MB external BEF ram, 32bit path


1 RM10 board (of 1) 1/0/0/0


Texture Memory: 256MB/-/-/-


Small pixel depth


32K cmap


GVO option detected


brd: 80f61806 3041606/-/-/- f9311002


ge: 0 14832057 24731057 14231057


rm0: 15032057 15431057


4631057 2/2/2/2


4d31057 2/2/2/2/2/2/2/2


4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5


dg: 05532057


5838057 1/1/1/1


5631057 1/1


GE:   NIC #:      0000.0040.1d04 (family: 0b)


Serial #:   KVZ553


Part #:     030-1398-001


KT:   NIC #:      0000.0047.26b1 (family: 0b)


Serial #:   KFR848


Part #:     030-1067-001


RM0:  NIC #:      0000.0048.ef6f (family: 0b)


Serial #:   KBR276


Part #:     030-1402-001


TM0:  NIC #:      0000.0048.49d3 (family: 0b)


Serial #:   KBR023


Part #:     030-1588-001


RM1:  No NIC serial number available.


TM1:  No NIC serial number available.


RM2:  No NIC serial number available.


TM2:  No NIC serial number available.


RM3:  No NIC serial number available.


TM3:  No NIC serial number available.


BP:   No NIC serial number available.


DG:   NIC #:      0000.0023.58b7 (family: 0b)


Serial #:   GPL120


Part #:     030-1242-001


DGOPT:NIC #:      0000.001e.298b (family: 0b)


Serial #:   GPP724


Part #:     030-1184-002


Input Sync: Voltage - Video Level; Source - Internal; Genlocked - Fals


Channel 0:


Channel's Source Size: 1920 pixels, 1200 lines; Origin = (0,0)


Video Output: 0 pixels, 0 lines, 0.00Hz ()


Video Format Flags:  (none)


Sync Output(s):


Composite sync on Green


Composite TTL sync on Aux 0


Using Gamma Map 0


cortex 4#

Code: Select all


cortex 61# configmon -h


SEQ            NAME      LOCATION          SERIAL_NUM   PART_NUMBER  REVISION


===============================================================================


0              NA            NA                  NA            NA        NA


1               1            NA            K0027261            NA        NA


2       8P12_MPLN            NA              HXP697  030-1535-001         B


3            IP31            n1              KRS981  030-1523-001         C


4   IP31PIMMR12KS            n1              KRH713  030-1423-002         G


5       MEMBANK_0            n1                  NA            NA        NA


6       MEMBANK_1            n1                  NA            NA        NA


7       MEMBANK_2            n1                  NA            NA        NA


8       MEMBANK_3            n1                  NA            NA        NA


9          R12000            n1                  NA            NA        NA


10          R12000            n1                  NA            NA        NA


11            IP31            n2              LAJ448  030-1523-001         C


12   IP31PIMMR12KS            n2              LAJ899  030-1423-002         G


13       MEMBANK_0            n2                  NA            NA        NA


14       MEMBANK_1            n2                  NA            NA        NA


15       MEMBANK_2            n2                  NA            NA        NA


16       MEMBANK_3            n2                  NA            NA        NA


17          R12000            n2                  NA            NA        NA


18          R12000            n2                  NA            NA        NA


19      ROUTER_IR1            r2              KDK226  030-0841-003         B


20      ROUTER_IR1            r1              KLC273  030-0841-003         C


21           MSCSI           io8              KCP460  030-1243-001         M


22     SCSI_CTLR_2            NA                  NA            NA        NA


23     SCSI_CTLR_3            NA                  NA            NA        NA


24     SCSI_CTLR_4            NA                  NA            NA        NA


25     SCSI_CTLR_5            NA                  NA            NA        NA


26            DIVO           io7              KAH156  030-1305-001         E


27          BASEIO           io1              DYZ782  030-0734-002         N


28             MIO           io1              EYZ131  030-0880-003         E


29    ETHERNET_EF0            NA                  NA            NA        NA


30     SCSI_CTLR_0            NA                  NA            NA        NA


31         DRIVE_1            NA     AK0T797625L2918  IBM DNES-318350Y      SAF0


32         DRIVE_2            NA  6807B3B6GKGSPMTWCE       DGHS18Y      03B2


33     SCSI_CTLR_1            NA                  NA            NA        NA


34         DRIVE_4            NA            3CE0DXQC   ST173404LCV      4301


35         DRIVE_5            NA            3CE063KV   ST173404LCV      4301


36   FIBRE_CHANNEL           io9              JHT635  030-0927-003         E


37     SCSI_CTLR_6            NA                  NA            NA        NA


38     SCSI_CTLR_7            NA                  NA            NA        NA


39         PCI_XIO           io2              KDG223  030-1062-002         E


40          GE16-4           io3              KVZ553  030-1398-001         E


41           KTOWN           io3              KFR848  030-1067-001         F


42             RM9           io3              KBR276  030-1402-001         E


43           DG5-2           io3              GPL120  030-1242-001         D


44             GVO           io3              GPP724  030-1184-002         B


===============================================================================


cortex 62#

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

SupremeCmdr
From Sydney, Australia
Who joined March 1, 2006, 1:38 a.m.

Wrote the following at Jan. 20, 2008, 11:34 p.m...

Brilliant, you got the power connected I assume.

Apple Unibody MBP 2.66Ghz, 8Gb OSX 10.6
Apple MacMini 1.83Ghz, 1Gb OSX 10.5
Apple Power Mac Cube 450Mhz, 256Mb, OSX 10.3 Sweet!
Sun Ultra10 440Mhz 1Gb, SunOS 5.10

http://gothmog.homeunix.net/blog

maxsleg
From Stuttgart
Who joined April 3, 2007, 11:56 p.m.

Wrote the following at Jan. 20, 2008, 11:44 p.m...

Small pixel depth

Are you going to do anything about that

hint - ircombine

Nice set up!!

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at April 2, 2008, 12:44 a.m...

Another 4 x 400 MHz CPUs. Thanks Walnut., it was really well packed.

Code: Select all


hinv -v -m


Location: /hw/module/1/slot/n1/node


MODULEID Board: barcode K0027261   part              rev


IP31 Board: barcode KRS981     part 030-1523-001 rev  C


8P12_MPLN Board: barcode HXP697     part 030-1535-001 rev  B


IP31PIMMR12KS Board: barcode KRH713     part 030-1423-002 rev  G


Location: /hw/module/1/slot/n2/node


IP31PIMMR12KS Board: barcode LAJ899     part 030-1423-002 rev  G


IP31 Board: barcode LAJ448     part 030-1523-001 rev  C


Location: /hw/module/1/slot/n3/node


IP31PIMMR12KS Board: barcode LAK445     part 030-1423-002 rev  G


IP31 Board: barcode LAK857     part 030-1523-001 rev  C


Location: /hw/module/1/slot/n4/node


IP31PIMMR12KS Board: barcode LAT486     part 030-1423-002 rev  G


IP31 Board: barcode JZP191     part 030-1523-001 rev  C


Location: /hw/module/1/slot/r1/router


ROUTER_IR1 Board: barcode KLC273     part 030-0841-003 rev  C


Location: /hw/module/1/slot/r2/router


ROUTER_IR1 Board: barcode KDK226     part 030-0841-003 rev  B


Location: /hw/module/1/slot/io2/pci_xio


PCI_XIO Board: barcode KDG223     part 030-1062-002 rev  E


Location: /hw/module/1/slot/io8/mscsi


MSCSI Board: barcode KCP460     part 030-1243-001 rev  M


Location: /hw/module/1/slot/io7/divo


DIVO Board: barcode KAH156     part 030-1305-001 rev  E


Location: /hw/module/1/slot/io1/baseio


BASEIO Board: barcode DYZ782     part 030-0734-002 rev  N


MIO Board: barcode EYZ131     part 030-0880-003 rev  E


Location: /hw/module/1/slot/io9/fibre_channel


FIBRE_CHANNEL Board: barcode JHT635     part 030-0927-003 rev  E


Location: /hw/module/1/slot/io3/kona


GE16-4 Board: barcode KVZ553     part 030-1398-001 rev  E


KTOWN Board: barcode KFR848     part 030-1067-001 rev  F


8 400 MHZ IP27 Processors


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


CPU 0 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 1 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 2 at Module 1/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 3 at Module 1/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 4 at Module 1/Slot 3/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 5 at Module 1/Slot 3/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 6 at Module 1/Slot 4/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 7 at Module 1/Slot 4/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)   Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


Main memory size: 5120 Mbytes


Instruction cache size: 32 Kbytes


Data cache size: 32 Kbytes


Secondary unified instruction/data cache size: 8 Mbytes


Memory at Module 1/Slot 1: 2048 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 2: 2048 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 3: 512 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 4: 512 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)


ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)


Integral SCSI controller 2: Version QL1040B (rev. 2), differential


Integral SCSI controller 3: Version QL1040B (rev. 2), differential


Integral SCSI controller 4: Version QL1040B (rev. 2), differential


Integral SCSI controller 5: Version QL1040B (rev. 2), differential


Integral SCSI controller 6: Version Fibre Channel AIC-1160, revision 2


Integral SCSI controller 0: Version QL1040B (rev. 2), single ended


Disk drive: unit 1 on SCSI controller 0 (unit 1)


Disk drive: unit 2 on SCSI controller 0 (unit 2)


CDROM: unit 6 on SCSI controller 0


Integral SCSI controller 1: Version QL1040B (rev. 2), single ended


Integral SCSI controller 7: Version Fibre Channel AIC-1160, revision 2


IOC3/IOC4 serial port: tty1


IOC3/IOC4 serial port: tty2


IOC3/IOC4 serial port: tty3


IOC3/IOC4 serial port: tty4


IOC3 parallel port: plp1


Graphics board: InfiniteReality3


Gigabit Ethernet: eg0, module 1, PCI slot 2, firmware version 12.4.10


Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2


Iris Audio Processor: version RAD revision 7.0, number 1


Origin PCI XIO board, module 1 slot 2: Revision 4


PCI Adapter ID (vendor 0x133d, device 0x0001) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2


Origin MSCSI board, module 1 slot 8: Revision 4


Origin BASEIO board, module 1 slot 1: Revision 3


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2


Origin FIBRE CHANNEL board, module 1 slot 9: Revision 4


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7


DIVO Video: controller 0 unit 0: Input, Output


IOC3/IOC4 external interrupts: 1


HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 3: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 4: Revision 6 Speed 100.00 Mhz (enabled)


IP27prom in Module 1/Slot n1: Revision 6.156


IP27prom in Module 1/Slot n2: Revision 6.156


IP27prom in Module 1/Slot n3: Revision 6.156


IP27prom in Module 1/Slot n4: Revision 6.156


IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156

Code: Select all


/usr/dmedia/bin/DIVO/divohinv


/hw/module/1/slot/io7/divo


DIVO (part number 030-1305-001 E), serial number KAH156


VL device 0 (name DIVO_0), AL subsystem DIVO_0


IRIX number 0

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at May 16, 2008, 4:15 p.m...

After the upgrade to 8 x 500 r14000 and 16 x 400 r12000 and 37Gb of RAM:

Code: Select all


Location: /hw/module/1/slot/n1/node


MODULEID Board: barcode K0027261   part              rev


IP31PIMMR14K Board: barcode MJG000     part 030-1547-002 rev  E


8P12_MPLN Board: barcode HXP697     part 030-1535-001 rev  B


IP31 Board: barcode MHZ690     part 030-1523-001 rev  C


Location: /hw/module/1/slot/n2/node


IP31 Board: barcode MJA682     part 030-1523-001 rev  C


IP31PIMMR14K Board: barcode MJV829     part 030-1547-002 rev  E


Location: /hw/module/1/slot/n3/node


IP31 Board: barcode MHZ231     part 030-1523-001 rev  C


IP31PIMMR14K Board: barcode MJJ983     part 030-1547-002 rev  E


Location: /hw/module/1/slot/n4/node


IP31 Board: barcode JRP729     part 030-1255-003 rev  D


IP31PIMMR14K Board: barcode DPD869     part 030-1547-002 rev  D


Location: /hw/module/1/slot/r1/router


ROUTER_IR1 Board: barcode KLC273     part 030-0841-003 rev  C


Location: /hw/module/1/slot/r2/router


ROUTER_IR1 Board: barcode KDK226     part 030-0841-003 rev  B


Location: /hw/module/1/slot/io2/pci_xio


PCI_XIO Board: barcode KDG223     part 030-1062-002 rev  E


Location: /hw/module/1/slot/io8/mscsi


MSCSI Board: barcode KCP460     part 030-1243-001 rev  M


Location: /hw/module/1/slot/io7/divo


DIVO Board: barcode KAH156     part 030-1305-001 rev  E


Location: /hw/module/1/slot/io1/baseio


BASEIO Board: barcode DYZ782     part 030-0734-002 rev  N


MIO Board: barcode EYZ131     part 030-0880-003 rev  E


Location: /hw/module/1/slot/io9/fibre_channel


FIBRE_CHANNEL Board: barcode JHT635     part 030-0927-003 rev  E


Location: /hw/module/1/slot/io3/kona


GE16-4 Board: barcode KVZ553     part 030-1398-001 rev  E


KTOWN Board: barcode KFR848     part 030-1067-001 rev  F


Location: /hw/module/2/slot/n1/node


MODULEID Board: barcode K0019167   part              rev


IP31PIMMR12KS Board: barcode LAT691     part 030-1423-002 rev  G


IP31 Board: barcode LAX165     part 030-1523-001 rev  C


8P12_MPLN Board: barcode FXZ861     part 030-0762-006 rev  K


Location: /hw/module/2/slot/n2/node


IP31PIMMR12KS Board: barcode HGL932     part 030-1423-002 rev  G


IP31 Board: barcode KSB603     part 030-1523-001 rev  C


Location: /hw/module/2/slot/n3/node


IP31 Board: barcode KRT958     part 030-1523-001 rev  C


IP31PIMMR12KS Board: barcode KRK403     part 030-1423-002 rev  F


Location: /hw/module/2/slot/n4/node


IP31PIMMR12KS Board: barcode KRH708     part 030-1423-002 rev  G


IP31 Board: barcode KSB450     part 030-1523-001 rev  C


Location: /hw/module/2/slot/r1/router


ROUTER_IR1 Board: barcode GWR211     part 030-0841-003 rev  B


Location: /hw/module/2/slot/r2/router


ROUTER_IR1 Board: barcode GTL148     part 030-0841-003 rev  B


Location: /hw/module/2/slot/io1/baseio


BASEIO Board: barcode HSG629     part 030-1124-002 rev  M


Location: /hw/module/2/slot/io3/mscsi


MSCSI Board: barcode HSK846     part 030-1243-001 rev  M


Location: /hw/module/3/slot/n1/node


MODULEID Board: barcode K0009218   part              rev


IP31 Board: barcode KRS981     part 030-1523-001 rev  C


IP31PIMMR12KS Board: barcode KRH713     part 030-1423-002 rev  G


8P12_MPLN Board: barcode DWZ328     part 013-1547-003 rev  D


Location: /hw/module/3/slot/n2/node


IP31PIMMR12KS Board: barcode LAJ899     part 030-1423-002 rev  G


IP31 Board: barcode LAJ448     part 030-1523-001 rev  C


Location: /hw/module/3/slot/n3/node


IP31PIMMR12KS Board: barcode LAT486     part 030-1423-002 rev  G


IP31 Board: barcode JZP191     part 030-1523-001 rev  C


Location: /hw/module/3/slot/n4/node


IP31PIMMR12KS Board: barcode LAK445     part 030-1423-002 rev  G


IP31 Board: barcode LAK857     part 030-1523-001 rev  C


Location: /hw/module/3/slot/r1/router


ROUTER_IR1 Board: barcode MDS015     part 030-0841-003 rev  D


Location: /hw/module/3/slot/r2/router


ROUTER_IR1 Board: barcode MDM991     part 030-0841-003 rev  D


Location: /hw/module/3/slot/io1/baseio


BASEIO Board: barcode FSN491     part 030-0734-002 rev  K


MIO Board: barcode GWN986     part 030-0880-003 rev  F


Location: /hw/module/3/slot/io3/mscsi


MSCSI Board: barcode GSR276     part 030-1243-001 rev  G


Processor 0: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 1: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 2: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 3: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 4: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 5: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 6: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 7: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 8: 400 MHZ IP27


BASEIO Board: barcode HSG629     part 030-1124-002 rev  M


Location: /hw/module/2/slot/io3/mscsi


MSCSI Board: barcode HSK846     part 030-1243-001 rev  M


Location: /hw/module/3/slot/n1/node


MODULEID Board: barcode K0009218   part              rev


IP31 Board: barcode KRS981     part 030-1523-001 rev  C


IP31PIMMR12KS Board: barcode KRH713     part 030-1423-002 rev  G


8P12_MPLN Board: barcode DWZ328     part 013-1547-003 rev  D


Location: /hw/module/3/slot/n2/node


IP31PIMMR12KS Board: barcode LAJ899     part 030-1423-002 rev  G


IP31 Board: barcode LAJ448     part 030-1523-001 rev  C


Location: /hw/module/3/slot/n3/node


IP31PIMMR12KS Board: barcode LAT486     part 030-1423-002 rev  G


IP31 Board: barcode JZP191     part 030-1523-001 rev  C


Location: /hw/module/3/slot/n4/node


IP31PIMMR12KS Board: barcode LAK445     part 030-1423-002 rev  G


IP31 Board: barcode LAK857     part 030-1523-001 rev  C


Location: /hw/module/3/slot/r1/router


ROUTER_IR1 Board: barcode MDS015     part 030-0841-003 rev  D


Location: /hw/module/3/slot/r2/router


ROUTER_IR1 Board: barcode MDM991     part 030-0841-003 rev  D


Location: /hw/module/3/slot/io1/baseio


BASEIO Board: barcode FSN491     part 030-0734-002 rev  K


MIO Board: barcode GWN986     part 030-0880-003 rev  F


Location: /hw/module/3/slot/io3/mscsi


MSCSI Board: barcode GSR276     part 030-1243-001 rev  G


Processor 0: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 1: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 2: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 3: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 4: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 5: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 6: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 7: 500 MHZ IP27


CPU: MIPS R14000 Processor Chip Revision: 1.4


FPU: MIPS R14010 Floating Point Chip Revision: 1.4


Processor 8: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 9: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 10: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 11: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 12: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 13: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 14: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 15: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 16: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 17: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 18: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 19: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 20: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 21: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 22: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


Processor 23: 400 MHZ IP27


CPU: MIPS R12000 Processor Chip Revision: 3.5


FPU: MIPS R12010 Floating Point Chip Revision: 3.5


CPU 0 at Module 1/Slot 1/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 1 at Module 1/Slot 1/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 2 at Module 1/Slot 2/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 3 at Module 1/Slot 2/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 4 at Module 1/Slot 3/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 5 at Module 1/Slot 3/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 6 at Module 1/Slot 4/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 7 at Module 1/Slot 4/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)


Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa


CPU 8 at Module 2/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 9 at Module 2/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 10 at Module 2/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 11 at Module 2/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 12 at Module 2/Slot 3/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 13 at Module 2/Slot 3/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 14 at Module 2/Slot 4/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 15 at Module 2/Slot 4/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 16 at Module 3/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 17 at Module 3/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 18 at Module 3/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 19 at Module 3/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 20 at Module 3/Slot 3/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 21 at Module 3/Slot 3/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 22 at Module 3/Slot 4/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


CPU 23 at Module 3/Slot 4/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled)


Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz  Tap 0xa


Main memory size: 38400 Mbytes


Instruction cache size: 32 Kbytes


Data cache size: 32 Kbytes


Secondary unified instruction/data cache size: 8 Mbytes


Memory at Module 1/Slot 1: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 2: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 3: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 1/Slot 4: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 2/Slot 1: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 2/Slot 2: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 2/Slot 3: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 2/Slot 4: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 3/Slot 1: 4096 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Bank 2 contains 512 MB (Standard) DIMMS (enabled)


Bank 3 contains 512 MB (Standard) DIMMS (enabled)


Bank 4 contains 512 MB (Standard) DIMMS (enabled)


Bank 5 contains 512 MB (Standard) DIMMS (enabled)


Bank 6 contains 512 MB (Standard) DIMMS (enabled)


Bank 7 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 3/Slot 2: 1024 MB (enabled)


Bank 0 contains 512 MB (Standard) DIMMS (enabled)


Bank 1 contains 512 MB (Standard) DIMMS (enabled)


Memory at Module 3/Slot 3: 256 MB (enabled)


Bank 0 contains 128 MB (Standard) DIMMS (enabled)


Bank 1 contains 128 MB (Standard) DIMMS (enabled)


Bank 2 contains 128 MB (Standard) DIMMS (disabled)


Bank 3 contains 128 MB (Standard) DIMMS (disabled)


Memory at Module 3/Slot 4: 256 MB (enabled)


Bank 0 contains 256 MB (Standard) DIMMS (enabled)


ROUTER in Module 1/Slot 2: Revision 2: Active Ports [2,3,4,5,6] (enabled)


ROUTER in Module 1/Slot 4: Revision 2: Active Ports [2,3,4,5,6] (enabled)


ROUTER in Module 2/Slot 2: Revision 2: Active Ports [3,4,5,6] (enabled)


ROUTER in Module 2/Slot 4: Revision 2: Active Ports [1,3,4,5,6] (enabled)


ROUTER in Module 3/Slot 2: Revision 2: Active Ports [2,4,5,6] (enabled)


ROUTER in Module 3/Slot 4: Revision 2: Active Ports [1,2,4,5,6] (enabled)


Integral SCSI controller 2: Version QL1040B (rev. 2), differential


Integral SCSI controller 3: Version QL1040B (rev. 2), differential


Integral SCSI controller 4: Version QL1040B (rev. 2), differential


Integral SCSI controller 5: Version QL1040B (rev. 2), differential


Integral SCSI controller 8: Version QL1040B (rev. 2), single ended


Disk drive: unit 1 on SCSI controller 8 (unit 1)


Disk drive: unit 2 on SCSI controller 8 (unit 2)


Disk drive: unit 3 on SCSI controller 8 (unit 3)


CDROM: unit 6 on SCSI controller 8


Integral SCSI controller 9: Version QL1040B (rev. 2), single ended


Integral SCSI controller 6: Version Fibre Channel AIC-1160, revision 2


Integral SCSI controller 0: Version QL1040B (rev. 2), single ended


Disk drive: unit 1 on SCSI controller 0 (unit 1)


Disk drive: unit 2 on SCSI controller 0 (unit 2)


CDROM: unit 6 on SCSI controller 0


Integral SCSI controller 1: Version QL1040B (rev. 2), single ended


Disk drive: unit 4 on SCSI controller 1 (unit 4)


Disk drive: unit 5 on SCSI controller 1 (unit 5)


Integral SCSI controller 15: Version QL1040B (rev. 2), single ended


Integral SCSI controller 14: Version QL1040B (rev. 2), single ended


Disk drive: unit 1 on SCSI controller 14 (unit 1)


Integral SCSI controller 10: Version QL1040B (rev. 2), differential


Integral SCSI controller 11: Version QL1040B (rev. 2), differential


Integral SCSI controller 12: Version QL1040B (rev. 2), differential


Integral SCSI controller 13: Version QL1040B (rev. 2), differential


Integral SCSI controller 16: Version QL1040B (rev. 2), differential


Integral SCSI controller 17: Version QL1040B (rev. 2), differential


Integral SCSI controller 18: Version QL1040B (rev. 2), differential


Integral SCSI controller 19: Version QL1040B (rev. 2), differential


Integral SCSI controller 7: Version Fibre Channel AIC-1160, revision 2


IOC3/IOC4 serial port: tty5


IOC3/IOC4 serial port: tty6


IOC3/IOC4 serial port: tty1


IOC3/IOC4 serial port: tty2


IOC3/IOC4 serial port: tty9


IOC3/IOC4 serial port: tty10


IOC3/IOC4 serial port: tty3


IOC3/IOC4 serial port: tty4


IOC3/IOC4 serial port: tty7


IOC3/IOC4 serial port: tty8


IOC3 parallel port: plp1


IOC3 parallel port: plp2


Graphics board: InfiniteReality3


Gigabit Ethernet: eg0, module 1, PCI slot 2, firmware version 12.4.10


Fast Ethernet: ef1, version 1, module 2, slot io1, pci 2


Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2


Fast Ethernet: ef2, version 1, module 3, slot io1, pci 2


Iris Audio Processor: version RAD revision 7.0, number 1


Iris Audio Processor: version RAD revision 7.0, number 2


Origin PCI XIO board, module 1 slot 2: Revision 4


PCI Adapter ID (vendor 0x133d, device 0x0001) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2


Origin MSCSI board, module 1 slot 8: Revision 4


Origin BASEIO board, module 1 slot 1: Revision 3


Origin BASEIO board, module 2 slot 1: Revision 4


Origin BASEIO board, module 3 slot 1: Revision 3


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0


PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2


Origin FIBRE CHANNEL board, module 1 slot 9: Revision 4


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


Origin MSCSI board, module 2 slot 3: Revision 4


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0


PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6


PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3


Origin MSCSI board, module 3 slot 3: Revision 3


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2


PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3


DIVO Video: controller 0 unit 0: Input, Output


IOC3/IOC4 external interrupts: 2


IOC3/IOC4 external interrupts: 1


IOC3/IOC4 external interrupts: 3


HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 3: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 1/Slot 4: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 2/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 2/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 2/Slot 3: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 2/Slot 4: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 3/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 3/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 3/Slot 3: Revision 6 Speed 100.00 Mhz (enabled)


HUB in Module 3/Slot 4: Revision 6 Speed 100.00 Mhz (enabled)


IP27prom in Module 1/Slot n1: Revision 6.156


IP27prom in Module 1/Slot n2: Revision 6.156


IP27prom in Module 1/Slot n3: Revision 6.156


IP27prom in Module 1/Slot n4: Revision 6.156


IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156


IP27prom in Module 2/Slot n1: Revision 6.156


IP27prom in Module 2/Slot n2: Revision 6.156


IP27prom in Module 2/Slot n3: Revision 6.156


IP27prom in Module 2/Slot n4: Revision 6.156


IP27prom in Module 3/Slot n1: Revision 6.156


IP27prom in Module 3/Slot n2: Revision 6.156


IP27prom in Module 3/Slot n3: Revision 6.156


IP27prom in Module 3/Slot n4: Revision 6.156

Bows to the GoBI for his patience, assistance, good humor and small white plastic clip.

Oh and those boards were really well packed also.

Thanks to Vagabondo for the memories.

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

maxsleg
From Stuttgart
Who joined April 3, 2007, 11:56 p.m.

Wrote the following at May 16, 2008, 11:57 p.m...

Is it now one and a half racks? (One compute and one with the graphics?)

regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.

Wrote the following at May 17, 2008, 1:43 a.m...

maxsleg wrote: Is it now one and a half racks? (One compute and one with the graphics?)

Yes. for now... The top compute module in the 2nd rack has a fan tray that is reportedly fried..

I have a Infinite Reality 3 Graphics module for sale, I need a working fan tray or ideas on how to fix/test it and I really need a plastic front panel for the top compute module... I have deskside skins for an Origin2000.. Trades or offers to sell me stuff welcome.

Regan

J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000

maxsleg
From Stuttgart
Who joined April 3, 2007, 11:56 p.m.

Wrote the following at May 17, 2008, 10:12 a.m...

I need a working fan tray

The fan tray for the graphics module (the giant axial fan) or the fan tray for the compute module (the smaller fans)...?
What error is reported regarding the fan tray?