Never Posted the outpout for my O2. Here it is after some recent hardware changes
Code:
bash$ hinv -vm
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
1 250 MHZ IP32 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
Disk drive: unit 2 on SCSI controller 0 (unit 2)
CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
Integral SCSI controller 2: Version IEEE1394 SBP2
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 1
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
PCI Adapter ID (vendor 0x104c, device 0x8024) PCI slot 3
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
DMediaPro DM10 FW option: unit 0, revision 1.1.0
bash$ /usr/gfx/gfxinfo -v
Graphics board 0 is "CRM" graphics.
Managed (":0.0") 1024x768
32 bitplanes
board revision 2, CRM revision C, GBE revision B
Monitor 0 type: AMT 13617
Channel 0:
Origin = (0,0)
Video Output: 1024 pixels, 768 lines, 75.03Hz (1024x768_75)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
IRIS 1# configmon -h
SEQ NAME LOCATION SERIAL_NUM PART_NUMBER REVISION
===============================================================================
0 NA NA NA NA NA
1 MOTHERBOARD NA NA NA NA
2 MAIN_MEMORY_256MB NA NA NA NA
3 R10000 NA NA NA NA
4 SCSI_CTLR_0 NA NA NA NA
5 DRIVE_2 NA 3KT0GZRX ST373207LC 0003
6 CDROM_4 NA NA NA NA
7 SCSI_CTLR_1 NA NA NA NA
8 SCSI_CTLR_2 NA NA NA NA
===============================================================================
IRIS 2# scsicontrol -i /dev/scsi/sc*
/dev/scsi/sc0d2l0: Disk SEAGATE ST373207LC 0003
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
/dev/scsi/sc0d4l0: CD-ROM TOSHIBA CD-ROM XM-5401TA3605
ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports: reladdr synch linkedcmds
Device is ready
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
1 250 MHZ IP32 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
Disk drive: unit 2 on SCSI controller 0 (unit 2)
CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
Integral SCSI controller 2: Version IEEE1394 SBP2
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 1
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
PCI Adapter ID (vendor 0x104c, device 0x8024) PCI slot 3
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
DMediaPro DM10 FW option: unit 0, revision 1.1.0
bash$ /usr/gfx/gfxinfo -v
Graphics board 0 is "CRM" graphics.
Managed (":0.0") 1024x768
32 bitplanes
board revision 2, CRM revision C, GBE revision B
Monitor 0 type: AMT 13617
Channel 0:
Origin = (0,0)
Video Output: 1024 pixels, 768 lines, 75.03Hz (1024x768_75)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
IRIS 1# configmon -h
SEQ NAME LOCATION SERIAL_NUM PART_NUMBER REVISION
===============================================================================
0 NA NA NA NA NA
1 MOTHERBOARD NA NA NA NA
2 MAIN_MEMORY_256MB NA NA NA NA
3 R10000 NA NA NA NA
4 SCSI_CTLR_0 NA NA NA NA
5 DRIVE_2 NA 3KT0GZRX ST373207LC 0003
6 CDROM_4 NA NA NA NA
7 SCSI_CTLR_1 NA NA NA NA
8 SCSI_CTLR_2 NA NA NA NA
===============================================================================
IRIS 2# scsicontrol -i /dev/scsi/sc*
/dev/scsi/sc0d2l0: Disk SEAGATE ST373207LC 0003
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
/dev/scsi/sc0d4l0: CD-ROM TOSHIBA CD-ROM XM-5401TA3605
ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports: reladdr synch linkedcmds
Device is ready
_________________
R10K/256/73GB R12K/2GB/V6 dead