Here ...
I'll take one. Sent you a PM
I'll take one. Sent you a PM
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
The collected works of gandtimo
With great thanks to 4130photo I present my precious
An Onyx2 Deskside with rackmount frontskin, FC-XIO with 8 36GB Stone-Drives attached (originally 16x but one IC on the second Stone-Array went the way of all living things
), 36GB System Drive, 3x73GB Drives configured as xlv-stripe.
The DIVO is not mine, only borrowed from 4130photo.
hinv:
gfxinfo:
Photos:
SAM_1212.JPG [ 167.19 KiB | Viewed 348 times ]
SAM_1213.JPG [ 156.78 KiB | Viewed 348 times ]
An Onyx2 Deskside with rackmount frontskin, FC-XIO with 8 36GB Stone-Drives attached (originally 16x but one IC on the second Stone-Array went the way of all living things
), 36GB System Drive, 3x73GB Drives configured as xlv-stripe.
The DIVO is not mine, only borrowed from 4130photo.
hinv:
Code:
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode HTY102 part 030-1255-003 rev B
IP31PIMM8MB Board: barcode KHK666 part 030-1401-002 rev C
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0025789 part rev
IP31 Board: barcode JEG084 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JDS946 part 030-1401-002 rev B
4P1G5_MPLN Board: barcode JRZ952 part 030-1066-002 rev L
Location: /hw/module/1/slot/io4/kona
GE14-4 Board: barcode GAJ247 part 030-1129-002 rev G
Location: /hw/module/1/slot/io5/fibre_channel
FIBRE_CHANNEL Board: barcode GTT357 part 030-0927-003 rev C
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode JJZ109 part 030-0734-002 rev N
MIO Board: barcode JJE728 part 030-0880-003 rev G
Location: /hw/module/1/slot/io3/divo
DIVO Board: barcode JRR377 part 030-1305-001 rev E
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
Main memory size: 2880 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 1792 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 1088 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Disk drive: unit 1 on SCSI controller 4 (unit 1)
Disk drive: unit 2 on SCSI controller 4 (unit 2)
Disk drive: unit 3 on SCSI controller 4 (unit 3)
Disk drive: unit 4 on SCSI controller 4 (unit 4)
Disk drive: unit 5 on SCSI controller 4 (unit 5)
Disk drive: unit 6 on SCSI controller 4 (unit 6)
Disk drive: unit 7 on SCSI controller 4 (unit 7)
Disk drive: unit 8 on SCSI controller 4 (unit 8)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin FIBRE CHANNEL board, module 1 slot 5: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 1 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
IP31 Board: barcode HTY102 part 030-1255-003 rev B
IP31PIMM8MB Board: barcode KHK666 part 030-1401-002 rev C
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0025789 part rev
IP31 Board: barcode JEG084 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JDS946 part 030-1401-002 rev B
4P1G5_MPLN Board: barcode JRZ952 part 030-1066-002 rev L
Location: /hw/module/1/slot/io4/kona
GE14-4 Board: barcode GAJ247 part 030-1129-002 rev G
Location: /hw/module/1/slot/io5/fibre_channel
FIBRE_CHANNEL Board: barcode GTT357 part 030-0927-003 rev C
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode JJZ109 part 030-0734-002 rev N
MIO Board: barcode JJE728 part 030-0880-003 rev G
Location: /hw/module/1/slot/io3/divo
DIVO Board: barcode JRR377 part 030-1305-001 rev E
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
Main memory size: 2880 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 1792 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 1088 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Disk drive: unit 1 on SCSI controller 4 (unit 1)
Disk drive: unit 2 on SCSI controller 4 (unit 2)
Disk drive: unit 3 on SCSI controller 4 (unit 3)
Disk drive: unit 4 on SCSI controller 4 (unit 4)
Disk drive: unit 5 on SCSI controller 4 (unit 5)
Disk drive: unit 6 on SCSI controller 4 (unit 6)
Disk drive: unit 7 on SCSI controller 4 (unit 7)
Disk drive: unit 8 on SCSI controller 4 (unit 8)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin FIBRE CHANNEL board, module 1 slot 5: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 1 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
gfxinfo:
Code:
Graphics board 0 is "KONAL" graphics.
Managed (":0.0") 1600x1200
Display has 8 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
2 RM7 boards (of 2) 1/1/0/0
Texture Memory: 64MB/64MB/-/-
Medium pixel depth
32K cmap, 64K external gamma
Channel 0:
Origin = (0,0)
Video Output: 1600 pixels, 1200 lines, 60.00Hz (1600x1200_60.vfo)
Channel 1:
Channel's Source Size: 720 pixels, 576 lines; Origin = (400,300)
Video Output: 800 pixels, 600 lines, 60.00Hz (800x600_60.vfo)
Managed (":0.0") 1600x1200
Display has 8 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
2 RM7 boards (of 2) 1/1/0/0
Texture Memory: 64MB/64MB/-/-
Medium pixel depth
32K cmap, 64K external gamma
Channel 0:
Origin = (0,0)
Video Output: 1600 pixels, 1200 lines, 60.00Hz (1600x1200_60.vfo)
Channel 1:
Channel's Source Size: 720 pixels, 576 lines; Origin = (400,300)
Video Output: 800 pixels, 600 lines, 60.00Hz (800x600_60.vfo)
Photos:
Attachment:
SAM_1212.JPG [ 167.19 KiB | Viewed 348 times ]
Attachment:
SAM_1213.JPG [ 156.78 KiB | Viewed 348 times ]
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
BetXen wrote:
Have fun !
Definitely
It's a lot of fun to see, how reactive and smooth you can work with a machine of that age
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
Hi,
I've got a problem capturing video from DIVO on the Onyx2. Namely I don't know, which tool to use. mediarecorder only offers me the option to capture video from screen and dmrecord wants a specified videoport, but the documentation doesn't mention the Onyx-hardware.
So how can I capture video (PAL, preferred uncompressed) on my Onyx?
I've got a problem capturing video from DIVO on the Onyx2. Namely I don't know, which tool to use. mediarecorder only offers me the option to capture video from screen and dmrecord wants a specified videoport, but the documentation doesn't mention the Onyx-hardware.
So how can I capture video (PAL, preferred uncompressed) on my Onyx?
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
recondas wrote:
Wrong toolset/software. You'll need to install the DIVO/DVC package - Ian has kindly provided a copy in his Resources Depot:
http://www.sgidepot.co.uk/depot/6.5.11_ ... 2.4.tar.gz
Thanks, I'll give it a try
recondas wrote:
PAL as in analog? If so the short answer is you don't.
Why not? Signal is coming from a VTR, composite, converted to SDI, into the DIVO.
videoin shows the video without problems.
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
I tried to install the package, but it produced 13 conflicts. 6.5.30 is running. Is there an actual DIVO/DVCPRO package?
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
Thanks for the explanations
Must have been too late or too hot yesterday. Normally I'm able to install software and READ the conflicts shown
Must have been too late or too hot yesterday. Normally I'm able to install software and READ the conflicts shown
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone
Now I installed the DIVO/DVC package, but mediarecorder still shows only the option to capture from screen, videoin crashes after a few seconds and Orion crashes the whole X...
Any ideas?
Any ideas?
_________________
cu
gandtimo
ikarus
4xR12k 300MHz, 2880Mb, 8x36Gb Stone