Nekonomicon - MMSC + touch screen for O2K/Onyx2

jan-jaap
From Wijchen, The Netherlands
Who joined June 17, 2004, 11:35 a.m.

Wrote the following at June 9, 2015, 12:52 a.m...

I've got a known good MMSC here, plus the touch screen unit which goes on the front of the O2K / Onyx2 rack. I've tested it with a deskside Onyx2 and it appears to work (it makes pretty bar graphs). One of the arrow buttons requires a bit of force. Can probably be cleaned.

I'll throw in some cables to hook it up, and a second MMSC with bad PSU.

Asking €50 + shipping (from The Netherlands).

Now this is a deep dark secret, so everybody keep it quiet

It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service:

(2x)

In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

jan-jaap
From Wijchen, The Netherlands
Who joined June 17, 2004, 11:35 a.m.

Wrote the following at Sept. 5, 2015, 10:39 a.m...

Bump.

It has to go. If you come pick it up you can have it for free

Now this is a deep dark secret, so everybody keep it quiet

It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service:

(2x)

In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

jmjsgi
From France ( BORDEAUX )
Who joined May 1, 2003, 1:42 p.m.

Wrote the following at Sept. 6, 2015, 12:12 p.m...

Hi,
can used it with O2 ?

SGI O2+ R12000 400
768mo and 36gb
O2 R5000 180
320 2x18gb
Indy R5000 180mhz
Indigo2maximum impact R10000 195

jan-jaap
From Wijchen, The Netherlands
Who joined June 17, 2004, 11:35 a.m.

Wrote the following at Sept. 6, 2015, 3:20 p.m...

jmjsgi wrote: can used it with O2 ?

Nope.

Origin 2000, Onyx2.

Now this is a deep dark secret, so everybody keep it quiet

It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service:

(2x)

In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

Pontus
From Uppsala, Sweden
Who joined May 8, 2008, 12:12 p.m.

Wrote the following at Sept. 6, 2015, 11:32 p.m...

Lets see, the MSC is the small thingamajiggy that goes in the front of the CPU modules. Do you mean MMSC ?

It might be a good thing to have a spare Front Panel Display but I'm all out of cash

<- MicroVAX 3500 :BA213:

<- DECsystem 5500 :BA215:

<- MicroVAX 3300
Pictures of my collection: www.pdp8.se

jan-jaap
From Wijchen, The Netherlands
Who joined June 17, 2004, 11:35 a.m.

Wrote the following at Sept. 7, 2015, 12:38 a.m...

Pontus wrote: Do you mean MMSC ?

Thanks for the correction

The silver pizza box, the front panel LCD assebly, the DB-something interconnect and a handful of mini-DB6 serial cables to be precise. I have a spare MMSC with infamously broken PSU but think that will go to the recycling because nobody will pay shipping for that.

Also, this item is now reserved.

Now this is a deep dark secret, so everybody keep it quiet

It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi
Currently in commercial service:

(2x)

In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

4130photo
From Bonn / Germany
Who joined Oct. 6, 2005, 12:01 p.m.

Wrote the following at Sept. 8, 2015, 7:29 a.m...

If the potential buyer will back up, i would be in

Hardware For Sale/Trade

MMSC + touch screen for O2K/Onyx2