SGI: Video

Whats on the other side of your VBOB..?

Inspired by recondas'es post in the hinv section
viewtopic.php?p=7345096#p7345096

I am wondering how people use their VBOB and what is on the other side of it.
What video hardware (monitors/input sources/etc/cameras) do you use with your SGI?
This may have been cover in the past but I am wondering what people are using now.

R.

_________________
死の神はりんごだけ食べる

開いた括弧は必ず閉じる -- あるプログラマー

:Tezro: :Tezro: :Onyx2R: :Onyx2RE: :Onyx2: :O3x04R: :O3x0: :O200: :Octane: :Octane2: :O2: :O2: :Indigo2IMP: :PI: :PI: :1600SW: :1600SW: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.

Sold: :Indy: :Indy: :Indy: :Indigo:

Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Book ----> http://pymblesoftware.com/book/
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.
one solution could be a aja hi5 converter box, that eats the hd formats from the vbob and gives it to i.e. a hdmi hd projector.
PymbleSoftware wrote:
Inspired by recondas'es post in the hinv section
viewtopic.php?p=7345096#p7345096

I am wondering how people use their VBOB and what is on the other side of it.
What video hardware (monitors/input sources/etc/cameras) do you use with your SGI?
This may have been cover in the past but I am wondering what people are using now.

R.


My VBOB isn't used much at the moment, but i use my Onyx2 for capturing old skate and bmx videos i still have as VHS. I convert them and hope to conservate them for the future ;)

I attached a BlackMagicDesigns analog to sdi converter which really has superb quality (as far as superb can be for VHS). I also use it for getting output from my digital tv recorder, i think it looks as good as a dvd...

Attachment:
File comment: Detail of a lot of cables
2011-12-21 10.34.02.jpg
2011-12-21 10.34.02.jpg [ 1.32 MiB | Viewed 885 times ]


Attachment:
File comment: My video capturing solution: Onyx2, DM10, analog => SDI converter
2011-12-21 10.34.42.jpg
2011-12-21 10.34.42.jpg [ 1.49 MiB | Viewed 885 times ]


Sorry for the bad piture quality, i used my mobile since a hadn't had my cam ready...

_________________
:Indigo: :Indigo2IMP: :Indigo2IMP: :Octane: :O2: :O200: :Octane2: :Onyx2: :Onyx2: :Onyx2R: :1600SW: :1600SW:
What's that under the monitor, a disk array?

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2: (2x) :O3x02L:
In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)
It's a stone array with 36gb scsi disks. Runs with DB9 fibre channel. I got it with the rack last month :mrgreen: Works fine, just the dongle for the still installed fire is missing :(

_________________
:Indigo: :Indigo2IMP: :Indigo2IMP: :Octane: :O2: :O200: :Octane2: :Onyx2: :Onyx2: :Onyx2R: :1600SW: :1600SW:
How would you respond to an email like this ...??

random email wrote:
Hi R, hope you remember having a phone conversation with me late last year regarding IRIX boot problems I had. Well I've finally got it all sorted out now. I've installed all the 'xtdigvid' software etc and all seems to work ok on my Tezro, but I seem to be having some trouble with the VBOB (DmediaPRO) box.
I have wired it up according the the book I have and seem to be able to test and reset it from the Tezro, but I can't seem to get a picture to route through it. Do you know any quick commands that I could use (logged into the vbob from the serial port) to do a quick configure of the VBOB?

Also, I seem to be missing the 'Breakout Cable' that connects to the PCI card on the back of the Tezro via a DB15 pin to 4 BNC's suppyling R,G,B and Black!


This is from someone I asked to join the forums and post their problems here. So far, it seems easier to just email me about.

I have no time and even less patience these days.

R.

_________________
死の神はりんごだけ食べる

開いた括弧は必ず閉じる -- あるプログラマー

:Tezro: :Tezro: :Onyx2R: :Onyx2RE: :Onyx2: :O3x04R: :O3x0: :O200: :Octane: :Octane2: :O2: :O2: :Indigo2IMP: :PI: :PI: :1600SW: :1600SW: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.

Sold: :Indy: :Indy: :Indy: :Indigo:

Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Book ----> http://pymblesoftware.com/book/
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.
This document talks about resetting the VBOB when input transfers hang: http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?coll=0650&db=relnotes&fname=/usr/relnotes/ml_xtdigvid_dev

_________________
Project:
Movin' on up, toooo the east side
Plan:
World domination! Or something...