SGI: Development

Mipspro + Little Endian Output - Page 1

Heres a screenshot:

Attachment:
supertuxkart.jpg
supertuxkart.jpg [ 241.3 KiB | Viewed 2155 times ]


Its a pretty big tardist... ~128meg.

Runs fine on the Tezro :D

Best regards,
emachine
emachine wrote:
Runs fine on the Tezro :D

The question is... does it run on anything else than a Tezro ? ;)

_________________
:Onyx2: :Fuel: :1600SW: :O2: :0300: :0300:
got an error......on Octane2 V6
Quote:
./supertuxkart -w
Data files will be fetched from: '/usr/nekoware/share/games/supertuxkart/'
Config file '//.supertuxkart/config' does not exist, it will be created.
Highscores will be saved in '//.supertuxkart/highscore.data'.
Music information file 'Ethereal_Spectrum_(ver_loop).music' not found - ignored.
Can't find music file 'Ethereal_Spectrum_(ver_loop).music' - ignored.
FATAL: ssgInit called without a valid OpenGL context.


any idea ?

_________________
SGI or die !!!
:O2: :Octane2: :Octane: :Indigo2IMP: :Indigo2IMP: :Indigo: :Indigo: :Indy: :PI: :Crimson: :PWRSeries: :Onyx: :O2000R:
HP proliant DL 585 Quad Opteron dual core 2.5Ghz 16Gb
Interesting. I don't believe its related to the music files because I see the same two lines and runs just fine.

Google search looks like its not an IRIX only "problem"? Most references say that its a problem with the GL library (which seems unlikely to me). Would be interesting to see what others see?

Emachine
emachine wrote:
Interesting. I don't believe its related to the music files because I see the same two lines and runs just fine.

Google search looks like its not an IRIX only "problem"? Most references say that its a problem with the GL library (which seems unlikely to me). Would be interesting to see what others see?

Emachine

I'll see If I can have a go at it tonight when I get home.

_________________
Mein Führer, I can walk!
Code:
ancalagon 11% /usr/nekoware/games/supertuxkart
95774:/usr/nekoware/games/supertuxkart: rld: Fatal Error: Cannot Successfully map soname 'libopenal.so.0' under any of the filenames /usr/nekoware/lib/libopenal.so.0:/usr/lib32/libopenal.so.0:/usr/lib32/internal/libopenal.so.0:/lib32/libopenal.so.0:/opt/lib32/libopenal.so.0:


It let me install supertuxkart without telling me about openal, so I went and installed openal from nekoware.

Code:
ancalagon 12% /usr/nekoware/games/supertuxkart
Segmentation fault (core dumped)


And now this happens.

_________________
:Octane2:

NOTE You cannot use Virtual Disk Manager to create or to shrink physical hard drives.
emachine wrote:
Heres a screenshot:

Attachment:
supertuxkart.jpg


Its a pretty big tardist... ~128meg.

Runs fine on the Tezro :D

Best regards,
emachine


Runs pretty well on fuel 600MHz V12 as well.
Sound, working.
Swedish language in menus with no config., go figure.
controls working.
Screen settings not working, always the same size, by design ??

Most games run fine!!!

Great job! another game to IRIX.

update. is to slow on O2 600MHz (5-10fps)

_________________
Mein Führer, I can walk!
Heres a list of the library dependencies on my box. I need to do a better job of getting the library dependencies in the tardist, was kind of in a hurry when I put this together.

Code:
libglut.so  =>   /usr/nekoware/lib/libglut.so
libGLU.so  =>    /usr/lib32/libGLU.so
libGL.so  =>     /usr/lib32/libGL.so
libm.so  =>      /usr/lib32/libm.so
libintl.so.4  =>         /usr/nekoware/lib/libintl.so.4
libSDL-1.2.so.1  =>      /usr/nekoware/lib/libSDL-1.2.so.1
libopenal.so.0  =>       /usr/nekoware/lib/libopenal.so.0
libvorbisfile.so.4  =>   /usr/nekoware/lib/libvorbisfile.so.4
libalut.so.1  =>         /usr/nekoware/lib/libalut.so.1
libCsup.so  =>   /usr/lib32/libCsup.so
libC.so.2  =>    /usr/lib32/libC.so.2
libCio.so.1  =>  /usr/lib32/libCio.so.1
libc.so.1  =>    /usr/lib32/libc.so.1
libXmu.so  =>    /usr/lib32/libXmu.so
libXext.so  =>   /usr/lib32/libXext.so
libX11.so.1  =>  /usr/lib32/libX11.so.1
libXi.so  =>     /usr/lib32/libXi.so
libGLcore.so  =>         /usr/lib32/libGLcore.so
libXsgivc.so  =>         /usr/lib32/libXsgivc.so
libiconv.so.3  =>        /usr/nekoware/lib/libiconv.so.3
libaudio.so  =>  /usr/lib32/libaudio.so
libpthread.so  =>        /usr/lib32/libpthread.so
libdl.so  =>     /usr/lib32/libdl.so
libvorbis.so.1  =>       /usr/nekoware/lib/libvorbis.so.1
libogg.so.1  =>  /usr/nekoware/lib/libogg.so.1
libXt.so  =>     /usr/lib32/libXt.so
libgen.so  =>    /usr/lib32/libgen.so

emachine wrote:
Heres a list of the library dependencies on my box.


Ah, thank you sir. I shall check tomorrow when in front of the machine .
emachine wrote:
Runs fine on the Tezro :D


Tried it on my Onyx2 IR3 - runs fine on it too ;)


deBug wrote:
Screen settings not working, always the same size, by design ??


Same - seems to have the choice of running in a window or running "full screen" with identical output centered in the middle of the screen.

Nice job - looks and runs great!

_________________
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.
emachine wrote:
Heres a list of the library dependencies on my box.


I checked and I have everything, but it is still core dumping.
Works fine on a Fuel 1600 MHZ MIPS R14k + V12 and 2 GB Ram.

Sound works fine, together with xmms :!:
Strange to see all text in Dutch, but translation is well done.

Mark
Mark_G wrote:
Works fine on a Fuel 1600 MHZ MIPS R14k + V12 and 2 GB Ram.

Sound works fine, together with xmms :!:
Strange to see all text in Dutch, but translation is well done.

Mark


I guess it is just me then...

I am uninstalling it now, I will try again with the next release. :?
Worked fine on both a Fuel R14k and an Octane dual R12k-400 here.

_________________
:O3000: <> :O3000: :O2000: :Tezro: :Fuel: x2+ :Octane2: :Octane: x3 :1600SW: x2 :O2: x2+ :Indigo2IMP: :Indigo2: x2 :Indigo: x3 :Indy: x2+

Once you step up to the big iron, you learn all about physics, electrical standards, and first aid - usually all in the same day
Mark_G wrote:
Works fine on a Fuel 1600 MHZ ...

I want that one. Very much. Better lock your doors. :P
OOPS :oops:

Typo, R14k is clocked at 600 MHz, instead of 1600 MHz :mrgreen:

Thanks,

Mark
Runs fine too on Fuel R14k 600 V12.
Same display 'problem', displays an about 640x480 centered window while display is set to 1600x1024.

Great job, near Gran TUrismo Prologue on PS3 !! ;)

_________________
FuelR14k600/V12/1GB - Octane [email protected]/V8/1GB - SGI 320 (inside standard PC box) [email protected]/512MB W2k - Athlon 64x2 4200+/7900GS/2GB XP/OpenSuse - Sinclair ZX-81/16k ram ext.
fzalfa wrote:
got an error......on Octane2 V6
Quote:
./supertuxkart -w
Data files will be fetched from: '/usr/nekoware/share/games/supertuxkart/'
Config file '//.supertuxkart/config' does not exist, it will be created.
Highscores will be saved in '//.supertuxkart/highscore.data'.
Music information file 'Ethereal_Spectrum_(ver_loop).music' not found - ignored.
Can't find music file 'Ethereal_Spectrum_(ver_loop).music' - ignored.
FATAL: ssgInit called without a valid OpenGL context.


any idea ?


I get the same...Octane2 V8. :(

Edit:
Try running it at 16 bytes / pixel, it works fine then....It doesn't like the reduced famed buffer depth of 8 bpp :!: (but then again, neither do I! :mrgreen: )

_________________
No SGI box currently...Snif!
my V6 won"t go to 1280*1024 76 with 16bpp... illegal power-on configuration..
possible to make it work or not ?

regards

Laurent

_________________
SGI or die !!!
:O2: :Octane2: :Octane: :Indigo2IMP: :Indigo2IMP: :Indigo: :Indigo: :Indy: :PI: :Crimson: :PWRSeries: :Onyx: :O2000R:
HP proliant DL 585 Quad Opteron dual core 2.5Ghz 16Gb
You've hit the V6/V8 pixel clock bug....

Mine won't do that resolution either, so I had to go to 1024x768_75 at 16bpp...I only used it temporarily though to check out the game! Great fun.

_________________
No SGI box currently...Snif!