Hi,
just picked up this Origin 350 that once ran at SGI. It is in great condition and, surprise,
even comes with a 10 Gigabit Ethernet adapter. It is the 3rd rackserver from top of the stack.
hinv -vm
Location: /hw/module/001c04/node
IP59_4CPU Board: barcode NSJ339 part 030-1989-003 rev -B
Location: /hw/module/001c04/IXbrick/xtalk/15
2U_INT_53 Board: barcode NTX732 part 030-1809-006 rev -B
Location: /hw/module/001c04/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NWD099 part 030-1771-005 rev -B
4 1.0 GHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
CPU 0 at Module 001c04/Slot 0/Slice A: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 1 at Module 001c04/Slot 0/Slice B: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 2 at Module 001c04/Slot 0/Slice C: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 3 at Module 001c04/Slot 0/Slice D: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 16 Mbytes
Memory at Module 001c04/Slot 0: 4096 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (enabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Integral Gigabit Ethernet: tg0, module 001c04, PCI bus 1 slot 4
10 Gigabit Ethernet: xg1, module 001c04, 100 MHz PCIX bus 2 slot 1
Gigabit Ethernet: tg1, module 001c04, PCI bus 2 slot 2 port 0
Gigabit Ethernet: tg2, module 001c04, PCI bus 2 slot 2 port 1
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
PCI Adapter ID (vendor 0x17d5, device 0x5831) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c04/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c04/Slot n0: Revision 6.210
just picked up this Origin 350 that once ran at SGI. It is in great condition and, surprise,
even comes with a 10 Gigabit Ethernet adapter. It is the 3rd rackserver from top of the stack.
hinv -vm
Location: /hw/module/001c04/node
IP59_4CPU Board: barcode NSJ339 part 030-1989-003 rev -B
Location: /hw/module/001c04/IXbrick/xtalk/15
2U_INT_53 Board: barcode NTX732 part 030-1809-006 rev -B
Location: /hw/module/001c04/IXbrick/xtalk/15/pci-x/0/1/ioc4
IO9 Board: barcode NWD099 part 030-1771-005 rev -B
4 1.0 GHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
CPU 0 at Module 001c04/Slot 0/Slice A: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 1 at Module 001c04/Slot 0/Slice B: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 2 at Module 001c04/Slot 0/Slice C: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
CPU 3 at Module 001c04/Slot 0/Slice D: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz Tap 0x15
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 16 Mbytes
Memory at Module 001c04/Slot 0: 4096 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (enabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Integral Gigabit Ethernet: tg0, module 001c04, PCI bus 1 slot 4
10 Gigabit Ethernet: xg1, module 001c04, 100 MHz PCIX bus 2 slot 1
Gigabit Ethernet: tg1, module 001c04, PCI bus 2 slot 2 port 0
Gigabit Ethernet: tg2, module 001c04, PCI bus 2 slot 2 port 1
PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
PCI Adapter ID (vendor 0x17d5, device 0x5831) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 2
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c04/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c04/Slot n0: Revision 6.210