SGI: hinv

Octane: 2x360Mhz | V10 | 2GB

Attachment:
Octane-01.jpg
Octane-01.jpg [ 182.45 KiB | Viewed 255 times ]
Code:
hinv -vm
Location: /hw/node
PM20360MHZ Board: barcode KFP484     part 030-1591-001 rev  B
Location: /hw/node/xtalk/15
IP30 Board: barcode HXX639     part 030-1467-001 rev  B
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE8480497 part 060-0035-001 rev  B
FP1 Board: barcode MCJ404     part 030-0891-003 rev  H
Location: /hw/node/xtalk/11
ODY32B1_2 Board: barcode NAW190     part 030-1946-001 rev  A
2 360 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Code:
/usr/gfx/gfxinfo -v
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version B.2
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.00Hz (1280x1024_75)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Code:
diskpatch -v
sc0d1l0:  Disk         SGI     ST39204LC       3126  Serial: 3BV18TAJ
Code:
scsicontrol -i /dev/scsi/*
/dev/scsi/sc0d1l0:  Disk          SGI     ST39204LC       3126
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing
Device is  ready
Code:
uname -aR
IRIX64 iris 6.5 6.5.30m 07202013 IP30
Code:
versions -b | grep patch
I  patchSG0007111       05/08/2007  Patch SG0007111: ESP eventmond core fix
I  patchSG0007127       05/08/2007  Patch SG0007127: 6.5.30 XFS
I  patchSG0007143       05/08/2007  Patch SG0007143: TimeZone processing change and zonefile update
I  patchSG0007144       05/08/2007  Patch SG0007144: xfsdump rollup for 6.5.30
I  patchSG0007146       05/08/2007  Patch SG0007146: XFS Project Quota Userspace Fixes
I  patchSG0007147       05/08/2007  Patch SG0007147: XVM update for IRIX 6.5.30
I  patchSG0007162       05/08/2007  Patch SG0007162: Xsgi: xterm program hanging when it receives ^E
I  patchSG0007168       05/08/2007  Patch SG0007168: Rollup - kernel rollup for IRIX 6.5.30

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
Added a couple of photos.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************
I've always liked the green Octane skins over the blue ones. Nice machine!

What kind of rack is that underneath? I've been in the market for a nicer way to store my O300.

_________________
:Onyx2: :Fuel: :Indigo2: :Indigo2IMP: :O3x0:
Nice photo!

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2: (2x) :O3x02L:
In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)
bigD wrote:
Nice machine!
Thanks
BigD wrote:
What kind of rack is that underneath? I've been in the market for a nicer way to store my O300.
It's a 17U SGI short-rack . Very heavily built with double wall construction and front and rear doors, which helps lower the sound level of installed hardware.

jan-jaap wrote:
Nice photo!
Thanks.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************