SGI: hinv

Origin 300, 4xR14K 600MHz, 2GB

bigD
Addict
Who joined June 17, 2008, 8:38 p.m.
and authored 317 notes

Wrote the following at July 8, 2010, 3:44 p.m...

Thanks to recondas, I now have some quad 600MHz goodness! I have the Origin booted via serial console at the moment, but once I get the networking configured, I'll be connecting via Remote Desktop from my Octane2. I'll get some pics of the setup once it's all up and running.

A hinv -v:

Code:

IRIS 5# hinv -v

4 600 MHZ IP35 Processors

CPU: MIPS R14000 Processor Chip Revision: 2.4

FPU: MIPS R14010 Floating Point Chip Revision: 2.4

CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)

Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa

CPU 1 at Module 001c01/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)

Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa

CPU 2 at Module 001c01/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)

Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa

CPU 3 at Module 001c01/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)

Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa

Main memory size: 2048 Mbytes

Instruction cache size: 32 Kbytes

Data cache size: 32 Kbytes

Secondary unified instruction/data cache size: 4 Mbytes

Memory at Module 001c01/Slot 0: 2048 MB (enabled)

Bank 0 contains 512 MB (Premium) DIMMS (enabled)

Bank 1 contains 512 MB (Premium) DIMMS (enabled)

Bank 2 contains 512 MB (Premium) DIMMS (enabled)

Bank 3 contains 512 MB (Premium) DIMMS (enabled)

Integral SCSI controller 0: Version QL12160, single ended

Disk drive: unit 1 on SCSI controller 0 (unit 1)

Integral SCSI controller 1: Version QL12160, low voltage differential

IOC3/IOC4 serial port: tty3

IOC3/IOC4 serial port: tty4

Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4

PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1

PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4

PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5

IOC3/IOC4 external interrupts: 1

HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)

IP35prom in Module 001c01/Slot n0: Revision 6.210

USB controller: type OHCI

_________________
:Onyx2:

Onyx2, 4x400 MHz, IR3 // Origin 300, 4x600MHz
Octane2, 2x400 MHz, V12 // Indigo2, 200 MHz, Extreme

recondas
Moderator
Who joined June 6, 2004, 5:55 p.m.
and authored 3378 notes

Wrote the following at July 8, 2010, 4:28 p.m...

Congrats!

You'll have to update your signature file too.......

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

bigD
Addict
Who joined June 17, 2008, 8:38 p.m.
and authored 317 notes

Wrote the following at July 8, 2010, 10:18 p.m...

recondas wrote:

You'll have to update your signature file too.......

Done! And here are some pics:

_________________
:Onyx2:

Onyx2, 4x400 MHz, IR3 // Origin 300, 4x600MHz
Octane2, 2x400 MHz, V12 // Indigo2, 200 MHz, Extreme

hamei
Old Salt
Who joined Feb. 24, 2004, 5:10 p.m.
and authored 6608 notes

Wrote the following at July 9, 2010, 1:31 a.m...

bigD wrote:

Done! And here are some pics:

I see a red door and I want it painted black
no colors anymore I want them to turn black ...

nekonoko
Site Admin
Who joined Jan. 23, 2003, 2:31 a.m.
and authored 7591 notes

Wrote the following at July 9, 2010, 3:58 p.m...

Nice! I used one like this to run Nekochan a few years ago