Yes, the noise level is quite bearable, as long fastfan mode is not active.
Which will happen sooner or later when the rooms heats up. Usually fastfan
is first activated on the upper module as the warm air collects under the
ceiling. Often the lower module stays "quiet" for another half to one hour.
I'm just going through the remaining nodeboards as I got a replacement PSU
for the deskside (many thanks to jan-jaap). I revived 3 of them, one of them
had a mysterious oily substance in the RAM sockets. Maybe some sort of contact
cleaner.
I have one left with problems on CPU A:
(typed from screen, no network on the serial console notebook)
I plan to connect the deskside to the rack to build a 24 CPU system
Which will happen sooner or later when the rooms heats up. Usually fastfan
is first activated on the upper module as the warm air collects under the
ceiling. Often the lower module stays "quiet" for another half to one hour.
I'm just going through the remaining nodeboards as I got a replacement PSU
for the deskside (many thanks to jan-jaap). I revived 3 of them, one of them
had a mysterious oily substance in the RAM sockets. Maybe some sort of contact
cleaner.
I have one left with problems on CPU A:
Code: Select all
*** General Exception on node 1
*** EPC: 0x00000001fc388bc (0x00000001fc388bc)
*** Press ENTER to continue
(typed from screen, no network on the serial console notebook)
I plan to connect the deskside to the rack to build a 24 CPU system
=
-
+ | d | i | g | i | t | a | l | +apple +[...]
