This is wrong as there should be two nodes, the raid arrays are not powered and the MountainGate RSP-2150 SCSI-VHS Tape is not powered or connected.
Tomorrow is an equally good day to fix it.
Regan
Code: Select all
spectra 1# hinv -vm
Location: /hw/module/1/slot/MotherBoard/node
PIMM_225_2M_2P Board: barcode HTP839 part 013-2382-002 rev B
Location: /hw/module/1/slot/io7/xbox_dualxtown
XBOX_DUALXTOWN Board: barcode GKK426 part 030-1252-001 rev F
Location: /hw/module/1/slot/io1/MotherBoard
XBOX_EXT Board: barcode GRY731 part 030-1264-001 rev C
IP29 Board: barcode HTR389 part 030-1389-001 rev A
Location: /hw/module/1/slot/io1/MotherBoard/pci/2
[missing info: page A data not available] Laser 000000c59e74
Location: /hw/module/1/slot/io2/mscsi
MSCSI Board: barcode FTN041 part 030-1281-001 rev D
Location: /hw/module/1/slot/io3/menet
MENET Board: barcode GGF931 part 030-0873-003 rev G
Location: /hw/module/1/slot/io4/mscsi
MSCSI Board: barcode GGE344 part 030-1243-001 rev F
2 225 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9
Main memory size: 1152 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 1/Slot 1: 1152 MB (enabled)
Bank 0 contains 128 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version QL1040B (rev. 2), single ended
Integral SCSI controller 9: Version QL1040B (rev. 2), single ended
Integral SCSI controller 11: Version QL1040B (rev. 2), differential
Integral SCSI controller 10: Version QL1040B (rev. 2), single ended
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 6 on SCSI controller 1
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 12: Version QL1040B (rev. 2), single ended
Integral SCSI controller 13: Version QL1040B (rev. 2), differential
Integral SCSI controller 14: Version QL1040B (rev. 2), differential
Integral SCSI controller 15: Version QL1040B (rev. 2), differential
Integral SCSI controller 16: Version QL1040B (rev. 2), differential
Integral SCSI controller 8: Version QL1040B (rev. 2), differential
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 6: Version QL1040B (rev. 2), differential
Integral SCSI controller 7: Version QL1040B (rev. 2), differential
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty8
IOC3 parallel port: plp1
Gigabit Ethernet: eg0, module 1, PCI slot 6, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1
Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0
Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2
Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3
Origin PCI XIO board, module 1 slot 7: Revision 4
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
Origin 200 base I/O, module 1 slot 1
Origin MENET board, module 1 slot 3: Revision 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6
PCI Adapter ID (vendor 0x1112, device 0x2200) PCI slot 7
Origin MSCSI board, module 1 slot 2: Revision 3
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
Origin MSCSI board, module 1 slot 4: Revision 3
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.150
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150
spectra 2#
Tomorrow is an equally good day to fix it.
Regan
J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000