Hey Guys,
Here is an Onyx350 system I picked up that has the factory V12 install. I was amazed at how many parts are different from a standard Origin350.
Let me know if you guys want any other photos or info.
Here is an Onyx350 system I picked up that has the factory V12 install. I was amazed at how many parts are different from a standard Origin350.
Let me know if you guys want any other photos or info.
Code: Select all
002c12-L1>serial all
Data Location Value
------------------------------ ------------ --------
Local System Serial Number NVRAM M2100762
Reference System Serial Number NVRAM M2100762
Local Brick Serial Number EEPROM NCC247
Reference Brick Serial Number NVRAM NCC247
EEPROM Product Name Serial Part Number Rev T/W
---------- -------------- ------------- -------------------- --- ------
INTERFACE 2U_INT_53 NCC247 030_1809_003 B 00
IO9 IO9 NDZ742 030_1771_005 A 00
ODYSSEY ODY128B1_2 MVV600 030_1909_003 C 00
RISER 2U_RISER NBD086 030_1808_005 A 00
NODE IP53_4CPU NBB714 030_1959_002 A 00
SNOWBALL no hardware detected
PS 1 DPS-500EBE XPD0339003397 060-0178-003 S3
PS 2 DPS-500EBE XPD0339002947 060-0178-003 S3
EEPROM JEDEC-SPD Info Part Number Rev Speed SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0 CE000000000000000CECB100 M3 46L2820ET3-CA0 3E 10.0 N/A
DIMM 2 CE000000000000000CD8B100 M3 46L2820ET3-CA0 3E 10.0 N/A
DIMM 4 no hardware detected
DIMM 6 no hardware detected
DIMM 1 CE000000000000000CDBB100 M3 46L2820ET3-CA0 3E 10.0 N/A
DIMM 3 CE000000000000000CE4B100 M3 46L2820ET3-CA0 3E 10.0 N/A
DIMM 5 no hardware detected
DIMM 7 no hardware detected
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 5
Command Monitor. Type "exit" to return to the menu.
>> hinv
System SGI-IP35
4 800 MHz IP35 Processors
Main memory size: 4096 Mbytes
Graphics Controller
PCI IOC4: in slot 1, (adapter 0)
PCI Gigabit Ethernet (tigon3) Controller 1
Integral SCSI controller 2: Version IOC4 ATA
CDROM: unit 0 on SCSI Controller 2, (cdrom(2,0,7))
Integral SCSI controller 0: Version Qlogic 12160
Integral SCSI controller 1: Version Qlogic 12160
>> hinv -v
IP35 Node Board, Module 002c12
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
Processor A: 800 MHz R16000 Rev 2.2
Secondary Cache 8MB 400MHz Tap 0xa , (cpu 0)
R16010FPC Rev 2.2
Processor B: 800 MHz R16000 Rev 2.2
Secondary Cache 8MB 400MHz Tap 0xa , (cpu 1)
R16010FPC Rev 2.2
Processor C: 800 MHz R16000 Rev 2.2
Secondary Cache 8MB 400MHz Tap 0xa , (cpu 2)
R16010FPC Rev 2.2
Processor D: 800 MHz R16000 Rev 2.2
Secondary Cache 8MB 400MHz Tap 0xa , (cpu 3)
R16010FPC Rev 2.2
Memory on board, 4096 MBytes (Standard)
Bank 0, 1024 MBytes (Premium) <-- (Software Bank 0)
Bank 1, 1024 MBytes (Premium)
Bank 2, 1024 MBytes (Premium)
Bank 2, 1024 MBytes (Premium)
IXBRICK Bridge, Module 002c12
ASIC BRIDGE Rev 3, (widget 15)
adapter IOC4 Rev 4f
(pci id 1)
adapter IOC4-ATA Rev 4f
(pci id 1)
peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8178
adapter PCI (SCSI interface) Rev 6
(pci id 3)
adapter GigE Rev 15
(pci id 4)
IXBRICK Bridge, Module 002c12
ASIC BRIDGE Rev 3, (widget 15)
adapter ID (Vendor 1412 Device 1724 class 4 subclass 4)
(pci id 1)
ASIC XBOW Rev 3, on CBrick, Module 002c12
ODYSSEY Graphics Board, Module 002c12
>>
-
- Rear of V12 cage. solid plate no vents
-
- Top of V12 cage.
-
- Bottom of V12 cage with small air duct put there for reference.
-
- V12 heatsink retainer.
-
- V12 out of cage showing heatsink.
-
- Onyx350 fan on left Origin fan on right.
-
- Onyx350 top, Origin bottom.
-
- Onyx350 top, Origin bottom.
-
- Slot in Onyx350 fan lines up with side vent.
-
- Onyx350 IP air dam on top, Origin bottom.
-
- Small air duct mounted on rear panel.
If the thing isn't on fire it's a software problem.
