SGI: hinv

Octane R12000 300MHz 640MB SSI (Nothing flash)

uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 18, 2015, 5:40 p.m...

Code: Select all

Location: /hw/node
PM10300MHZ Board: barcode KFZ121     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
IP30 Board: barcode GYY448     part 030-0887-004 rev  B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode 42452C     part 030-0891-003 rev  E
PWR.SPPLY.ER Board: barcode AAE9160539 part 060-0035-002 rev  A
Location: /hw/node/xtalk/12
GM20 Board: barcode ESC890     part 030-0957-003 rev  H
1 300 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 640 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SSI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Machine I bought a few weeks back, it was the R10000, fitted new R12000 300MHz[edited.. originally stated 3000MHz]. Clean install IRIX (just finished a net install after a few hiccups), popped in a tape and a floppy (but will probably remove the floppy after I've installed all the old stuff from floppies into my SoftWindows). It came with 3 Drives, 1x9GB currently installed & 2 34GB (One of which my son destroyed by knocking it off the table). I've got some video cards in the loft I'll be testing etc. All in all a nice clean box, a shame the front door panel broke in transit. Oh and it has a Cherokee PSU.

It does feel quite nippy.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
foetz avatar
foetz
Moderator
Who joined April 14, 2003, 4:34 a.m.
Wrote the following at March 18, 2015, 5:52 p.m...
uunix wrote: fitted new R12000 3000MHz.

:shock:

my son destroyed by knocking it off the table

:shock:
r-a-c.de
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 18, 2015, 5:54 p.m...
foetz wrote:
uunix wrote: fitted new R12000 3000MHz.

:shock:

my son destroyed by knocking it off the table

:shock:

3000Mhz.. :lol:
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
vishnu avatar
vishnu
From Minneapolis, Minnesota USA
Who joined March 18, 2007, 3:25 p.m.
Wrote the following at March 18, 2015, 6:35 p.m...
I had a hella time installing IRIX on my new Tezro, until I realized that the advertised-as-brand-new SCSI disk that I bought off ebay was toast. Things went much better after I put in a functioning disk... :mrgreen:
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 19, 2015, 3:06 a.m...
vishnu wrote: I had a hella time installing IRIX on my new Tezro, until I realized that the advertised-as-brand-new SCSI disk that I bought off ebay was toast. Things went much better after I put in a functioning disk... :mrgreen:

A working disk help immensely.

I did find that, with my son knocking the disk of the table, it did not behave like toast/bread does and landed on it's corner. It's funny, but as soon as I put it on the table, a thought went through my mind that someone would knock it off.. and they did!
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 19, 2015, 2:46 p.m...
New hinv after a bit of messing tonight

Code: Select all

Location: /hw/node
PM10300MHZ Board: barcode KFZ121     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
IP30 Board: barcode GYY448     part 030-0887-004 rev  B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode 42452C     part 030-0891-003 rev  E
PWR.SPPLY.ER Board: barcode AAE9160539 part 060-0035-002 rev  A
Location: /hw/node/xtalk/12
GM20 Board: barcode ESC890     part 030-0957-003 rev  H
1 300 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: MXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
chicaneuk
Who joined July 10, 2012, 3:48 a.m.
Wrote the following at March 19, 2015, 3:01 p.m...
Nice :) Is it early type green skins as per the Octane's you had to scrap?
:Indigo: :Indigo2: :Indigo2IMP: :Indy: :Octane2: :O200:
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 19, 2015, 3:06 p.m...
Yes, but very very clean. (apart from the slightly broken front door - not visible from front).
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
ajw99uk
From Yorkshire, UK
Who joined April 19, 2011, 4:59 a.m.
Wrote the following at March 19, 2015, 4:44 p.m...
uunix wrote: What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.


Eight 256MB DIMMs or four 256MB kits? The labelling on DIMMs sold as part of two-DIMM kits often (usually?) shows the kit size. Once bought what I thought would be four 32MB SIMMs for the I2 which turned out to be 32MB in total because the seller had been caught out by that label "convention" (immediate refund, so sure it was an innocent mistake).
Fuel ; Indigo2 ; Octane ; RiscPC Kinetic/448MB/RISCOS4.39 or Debian-etch; EspressoPC ViaC3/900MHz/256MB/Debian-testing; RPi B RISCOS5.23; Rpi2 Raspbian-jessie; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21; R140/35MHz/4MB/RISCOS3.11 or RISCiX1.21
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 19, 2015, 4:51 p.m...
ajw99uk wrote:
uunix wrote: What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.


Eight 256MB DIMMs or four 256MB kits? The labelling on DIMMs sold as part of two-DIMM kits often (usually?) shows the kit size. Once bought what I thought would be four 32MB SIMMs for the I2 which turned out to be 32MB in total because the seller had been caught out by that label "convention" (immediate refund, so sure it was an innocent mistake).

good point, label says 256 on each stick from Kingston, so maybe you're right. Oh well.. better than original 600 odd MB
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
ajw99uk
From Yorkshire, UK
Who joined April 19, 2011, 4:59 a.m.
Wrote the following at March 20, 2015, 5:57 a.m...
uunix wrote: What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.

ajw99uk wrote: Eight 256MB DIMMs or four 256MB kits?

uunix wrote: good point, label says 256 on each stick from Kingston, so maybe you're right. Oh well.. better than original 600 odd MB

KSG-OCT/256 is definitely a kit part number - is that what you've got? - but 60% more RAM is better than 60% less!
Time to update the thread heading?
Fuel ; Indigo2 ; Octane ; RiscPC Kinetic/448MB/RISCOS4.39 or Debian-etch; EspressoPC ViaC3/900MHz/256MB/Debian-testing; RPi B RISCOS5.23; Rpi2 Raspbian-jessie; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21; R140/35MHz/4MB/RISCOS3.11 or RISCiX1.21
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 20, 2015, 6:19 a.m...
I hope no one has missed the SSI - MXI also
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy:
uunix avatar
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 20, 2015, 1:16 p.m...
Yup, Kit of 2

Code: Select all

KSG oct/256
2078 001.A00
kit of 2 CE
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :Octane2: :O2: :Indy: loft => :Indigo: :540: :Octane: :Octane: :Indy: