SGI: hinv

Indigo2, R4400 200Mhz, 384Mb RAM, Extreme

And another one, "proxima", the Indigo2:

hinv:

Code: Select all

thoweh@proxima $>hinv -v
CPU: MIPS R4400 Processor Chip Revision: 6.0
FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
1 200 MHZ IP22 Processor
Main memory size: 384 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version WD33C93B, revision D
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: GU1-Extreme
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
EISA bus: adapter 0



gfxinfo:

Code: Select all

thoweh@proxima $>/usr/gfx/gfxinfo
Graphics board 0 is "GR2" graphics.
Managed (":0.0") 1280x1024
8 GEs, 2 REs, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
GR2 revision 6, VB2.0
HQ2.1 rev A, GE7 rev B,  RE3.1 rev A, VC1 rev B, MC rev C
unknown, assuming 19" monitor


Other hardware:
- SGI granite keyboard & mouse
- Eizo FlexScan L567 (I'm an Eizo fan...) via the self made cable
- 3com fast ethernet card in EISA slot (Phobos E100 drives)

Planned upgrades:
None.
:A3502L: :O2000: :O200: = :O200: - :O200: :O200: :Octane: :Octane: :320: :O2: :Indigo2IMP: :Indy:
+ | d | i | g | i | t | a | l | +apple +[...] ;)
Nice!
Voralyan wrote: - Eizo FlexScan L567 (I'm an Eizo fan...)

Me too. It's very sad that most of the current EIZO displays do not support sync-on-green anymore :(
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2: (2x) :O3x02L:
In the museum : almost every MIPS/IRIX system.
Wanted : GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)