SGI: hinv

Octane, PCI card cage 2 x300MHz, FibreChannel PCI card.

regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at Nov. 20, 2006, 12:39 a.m...

Code: Select all

hinv -mv
Location: /hw/node
PM20 Board: barcode HRJ328     part 030-1356-001 rev  J
Location: /hw/node/xtalk/15
IP30 Board: barcode KJN377     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE9460440 part 060-0035-002 rev  A
FP1 Board: barcode 33094C     part 030-0891-003 rev  E
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode LKY520     part 030-0952-005 rev  E
Location: /hw/node/xtalk/12
MOT20 Board: barcode JKD288     part 030-1240-003 rev  G
2 300 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 4096 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg0, PCI slot 1, firmware version 0.0.0
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1


Code: Select all

/usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev F, Heart rev F
21" monitor (id 0xb)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)


Regan
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000
regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at Dec. 14, 2007, 4:53 a.m...
Just upgraded the RAM to 4Gb.. As of December 2007, I would like another 4Gb if anyone is selling..

Regan
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000
maxsleg avatar
maxsleg
From Stuttgart
Who joined April 3, 2007, 11:56 p.m.
Wrote the following at Dec. 14, 2007, 5:01 a.m...
Glad the RAM found a good home!!!
:ChallengeL: :O2000: :Onyx2: :Onyx: :O2000R: :O2000R: :O2000E: :O2000E: :Onyx2R: :O3000: :0300: :0300: :0300: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane: :Octane2: :Octane2: :Fuel: :Fuel:
regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at April 4, 2008, 7:37 p.m...
Just added another 2Gb of RAM, now 6Gb.
Still looking for another 2Gb of RAM if someone wants to sell some.

Regan


Code: Select all

hinv -vm
Location: /hw/node
PM20 Board: barcode HRJ328     part 030-1356-001 rev  J
Location: /hw/node/xtalk/15
IP30 Board: barcode KJN377     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE9460440 part 060-0035-002 rev  A
FP1 Board: barcode 33094C     part 030-0891-003 rev  E
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode LKY520     part 030-0952-005 rev  E
Location: /hw/node/xtalk/12
MOT20 Board: barcode JKD288     part 030-1240-003 rev  G
2 300 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 6272 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg0, PCI slot 1, firmware version 0.0.0
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1
PCI Adapter ID (vendor 0x1106, device 0x3038) PCI slot 2
PCI Adapter ID (vendor 0x1106, device 0x3038) PCI slot 2
PCI Adapter ID (vendor 0x1106, device 0x3104) PCI slot 2
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000
regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at April 21, 2008, 12:37 a.m...
Now with 8Gb of memory. No longer looking for RAM.
Thanks, maxsleg, jwhat..

Code: Select all

hinv -vm
Location: /hw/node
PM20 Board: barcode HRJ328     part 030-1356-001 rev  J
Location: /hw/node/xtalk/15
IP30 Board: barcode KJN377     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE9460440 part 060-0035-002 rev  A
FP1 Board: barcode 33094C     part 030-0891-003 rev  E
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode LKY520     part 030-0952-005 rev  E
Location: /hw/node/xtalk/12
MOT20 Board: barcode JKD288     part 030-1240-003 rev  G
2 300 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 8192 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg0, PCI slot 1, firmware version 0.0.0
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1
PCI Adapter ID (vendor 0x1106, device 0x3038) PCI slot 2
PCI Adapter ID (vendor 0x1106, device 0x3038) PCI slot 2
PCI Adapter ID (vendor 0x1106, device 0x3104) PCI slot 2


Regan
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000