8bitlover wrote:
Help again please. From the help you all provided, I was able to get the desktop up once I started the system through the terminal port by starting the system. Unfortunately, I had my cousin over to help me get network going and to also try setting up two screens; bad idea. He knows enough to really F**ck things up. Now I'm back to a system that won't start. I have attached a .pdf that shows what the system shows on the terminal. Can someone send me a list of what to do?
How can I learn more about this system? Is there a book available that shows all commands? I have no background knowledge of Linux or Unix which would greatly help me. Or maybe it's time to go back to school. Or I will just continue to post here and take notes until I figure it all out. And that's going to take a long time. HA
Attachment:
Onyx 2.pdf
Thanks,
Mr. Chris
As much as I distrust random files the contents of the PDF is...
Code:
IP27 PROM SGI Version 6.156 built 11:27:56 AM Nov 18, 2003
*** Warning: MSC debug (dbg) switches are non-zero
*** Diag level set to None (2)
Testing/Initializing memory ............... DONE
Copying PROM code to memory ............... DONE
Discovering local IO ......................
Found an io Board with nic 030-1275-003.
Found an io Board with nic 030-1305-001.
DONE
Discovering NUMAlink connectivity ......... DONE
Found 2 objects (2 hubs, 0 routers) in 431 usec
Waiting for peers to complete discovery.... DONE
Global master is /hw/module/1/slot/n2
Testing/Initializing all memory ........... DONE
Checking partitioning information ......... DONE
Loading BASEIO prom ....................... DONE
BASEIO PROM Monitor SGI Version 6.156 built 11:26:28 AM Nov 18, 2003 (BE64)
4 CPUs on 2 nodes found.
Installing PROM Device drivers ............
Base I/O Ethernet set to /dev/ethernet/ef0
Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2+ 3+ 4+ 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 5 device(s)
Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers .......... DONE
Checking hardware inventory ............... DONE
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 2
No. of NODEs disabled = 0
No. of CPUs enabled = 4
No. of CPUs disabled = 0
Mem enabled = 8192 MB
Mem disabled = 0 MB
No. of RTRs enabled = 0
No. of RTRs disabled = 0
DIAG RESULTS:
NO DIAGS WERE RUN!
**** End System Configuration and Diagnostics Summary ****
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 1
Starting up the system...
IRIX Release 6.5 IP27 Version 01101245 System V - 64 Bit
Copyright 1987-2001 Silicon Graphics, Inc.
All Rights Reserved.
Setting rbaud to 19200
The system is coming up.
Mounting filesystems:
Configuring eg0 as Onyx2
Downloading firmware for eg0
add net default: gateway 192.168.1.1
Network daemons: routed portmap.
Name services: nsd.
NFS daemons: nfsd biod.
Other NFS daemons: statd lockd autofsd.
Internet daemons: inetd timed.
Partition Config daemons : mkpd.
System controller daemons: mmscd.
Adding swap areas declared in /etc/fstab.
Mailer daemons: none.
Starting lp spooler.
Fibre Channel daemons: sesdaemon.
Removable media daemon: mediad.
Performance Co-Pilot starting PMCD (logfile is /var/adm/pcplog/pmcd.log) ...
System event collection: rtmond.
Starting Session Directory Server:
Starting teleffect daemon: tfxd.
The system is ready.
Onyx2 console login: [ESP System Information Notification]:No fibre channel cond
Onyx2 console login: root
IRIX Release 6.5 IP27 Onyx2
Copyright 1987-2001 Silicon Graphics, Inc. All Rights Reserved.
Last login: Sun Oct 14 17:17:30 PDT 2012 on ttyd1
TERM = (vt100)
Onyx2 1# run
run - Command not found
Onyx2 2# start
start - Command not found
Onyx2 3# hinv
4 400 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0
Disk drive: unit 2 on SCSI controller 0
Disk drive: unit 3 on SCSI controller 0
Disk drive: unit 4 on SCSI controller 0
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 serial port: tty3
IOC3 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality3
Gigabit Ethernet: eg0, module 1, XIO slot io5, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
IOC3 external interrupts: 1
Onyx2 4#
Onyx2 4# 4
4 - Command not found
Onyx2 5# reboot
Shutdown started. Mon Oct 15 20:29:19 PDT 2012
Broadcast Message from root (???) on Onyx2 Mon Oct 15 20:29:20 2012
THE SYSTEM IS BEING SHUT DOWN! Log off now.
INIT: New run level: 6
Stopping QuickPage daemon
Stopping teleffect daemon: tfxd.
Waiting for PMCD to terminate ...
Waiting for pmie process(es) to terminate ...
Stopping Session Directory Server:
The system is shutting down.
Please wait.
Stopping X Proxy Manager.
Stopping openldap server.
Stopping lp spooler.
Stopping Netscape Administration Server
Cannot stop Netscape Administration Server.
Stopping Netscape Fasttrack Server(s)
Removing swap areas.
Unmounting filesystems:
Reboot started from CPU 2
CPU 2 rebooting
CPU 0 rebooting
CPU 1 rebooting
CPU 3 rebooting
IP27 PROM SGI Version 6.156 built 11:27:56 AM Nov 18, 2003
*** Skipping diags as requested by kernel
*** Warning: MSC debug (dbg) switches are non-zero
*** Diag level set to None (2)
Testing/Initializing memory ............... DONE
Copying PROM code to memory ............... DONE
Discovering local IO ......................
Found an io Board with nic 030-1275-003.
Found an io Board with nic 030-1305-001.
DONE
Discovering NUMAlink connectivity ......... DONE
Found 2 objects (2 hubs, 0 routers) in 431 usec
Waiting for peers to complete discovery.... DONE
Global master is /hw/module/1/slot/n2
Testing/Initializing all memory ........... DONE
Checking partitioning information ......... DONE
Loading BASEIO prom ....................... DONE
BASEIO PROM Monitor SGI Version 6.156 built 11:26:28 AM Nov 18, 2003 (BE64)
4 CPUs on 2 nodes found.
Installing PROM Device drivers ............
Base I/O Ethernet set to /dev/ethernet/ef0
Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2+ 3+ 4+ 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 5 device(s)
Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers .......... DONE
Checking hardware inventory ............... DONE
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 2
No. of NODEs disabled = 0
No. of CPUs enabled = 4
No. of CPUs disabled = 0
Mem enabled = 8192 MB
Mem disabled = 0 MB
No. of RTRs enabled = 0
No. of RTRs disabled = 0
DIAG RESULTS:
NO DIAGS WERE RUN!
**** End System Configuration and Diagnostics Summary ****
Starting up the system...
IRIX Release 6.5 IP27 Version 01101245 System V - 64 Bit
Copyright 1987-2001 Silicon Graphics, Inc.
All Rights Reserved.
Setting rbaud to 19200
The system is coming up.
Mounting filesystems:
Configuring eg0 as Onyx2
Downloading firmware for eg0
add net default: gateway 192.168.1.1
Network daemons: routed portmap.
Name services: nsd.
NFS daemons: nfsd biod.
Other NFS daemons: statd lockd autofsd.
Internet daemons: inetd timed.
Partition Config daemons : mkpd.
System controller daemons: mmscd.
Adding swap areas declared in /etc/fstab.
Mailer daemons: none.
Starting lp spooler.
Fibre Channel daemons: sesdaemon.
Removable media daemon: mediad.
Performance Co-Pilot starting PMCD (logfile is /var/adm/pcplog/pmcd.log) ...
System event collection: rtmond.
Starting Session Directory Server:
Starting teleffect daemon: tfxd.
The system is ready.
Onyx2 console login: [ESP System Information Notification]:No fibre channel cond
Onyx2 console login: root
IRIX Release 6.5 IP27 Onyx2
Copyright 1987-2001 Silicon Graphics, Inc. All Rights Reserved.
Last login: Mon Oct 15 20:19:01 PDT 2012 on ttyd1
TERM = (vt100)
Onyx2 1# boot
/usr/etc/boot - Permission denied
Onyx2 2#
You might want to turn ESP off.
http://www.nekochan.net/wiki/ESP
Some basic Onyx2 info:
http://www.nekochan.net/wiki/Onyx2
200 results for Onys2 on techpubs.sgi.com
http://techpubs.sgi.com/library/tpl/cgi ... dwr&rpt=20
Especially:
http://techpubs.sgi.com/library/tpl/cgi ... srch=Onyx2
http://techpubs.sgi.com/library/tpl/cgi ... srch=onyx2
http://techpubs.sgi.com/library/tpl/cgi ... srch=Onyx2
http://techpubs.sgi.com/library/tpl/cgi ... =ircombine
Oh look some book about UNIX or something..
http://m.simson.net/ugh.pdf
You might be expecting it to go into graphical mode and start the X window system. In that case you might want to make sure there is a monitor, keyboard and mouse attached and reboot it and if that fails enter
"4"
"5" at the menu where you pressed "1" to boot the system to enter the command monitor type "printenv" and make sure console is set to "g" for graphics. If that is what your problem is...
R.
Edit
: typo, I meant "5 Enter command monitor"
J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.
(single-CM)