The collected works of sgi-enthusiast

Hi,
Here are the details of the Onyx350 rack (1 of 4) that I recently acquired and now have operational with the assistance of smj and recondas. The first two systems are up and going so the description refers to the configuration of each.
hinv -vm


gfxinfo

Thanks for looking!

Hi,
Does anyone know if this question was ever answered?

So far all I've gotten back from sgi is that the graphics hardware shouldn't matter, but he's going to look at the code.

Did anyone actually get this software to successfully work on other graphics systems?

Hi Here is the output from the L2 controller as well!

Cheers

Specifically an O350 with an IR4?

Can't have been fun shipping that bad daddy to Tasmania...

The freight cost was considerably more than the purchase price not to mention that I had shipping crates on skids made especially for the racks. As I am sure you have all experienced the careful carrying capabilities of your local freight company who's motto may not live up to the condition your new acquisition arrives in (as the doors have those blue clip-on plastic panels, I could just imagine them smashed to pieces if the rack wasn't wrapped in bubble wrap and crated)!

Hi recondas

Very nice! With IR4 graphics/2GB of texture memory and eight 800MHz IP35 processors in a single rack it would easily qualify as my idea of the ultimate Silicon Graphics system for residential use.

I thought about taking the other 2 RM11 boards out of the spare gbrick and either installing them in pipe '0' to make 4 or consolidating all the boards from the spare gbrick to make a pipe '1'. Not sure what the value of this would be considering there is only me to use it!
Agreed lots of horsepower but I don't actually have an application for the system so on that point, as a fellow IR system user, what do you actually use yours for? Do you have a particular application(s) you use that require the graphics system?
I have a quad 700 Tezro with 8Gb I generally toy with as its compact compared to the O350 rack (and a lot quieter) but if I hadn't bought these racks they would be at either the local metal recycler or the tip!

If you have the OEM cables that from from the "TMDS Video Output" ports on the DG5/TVO (in the G-Brick) to the matching ports on the VBoB, and those cables happen to be labeled with an SGI part number, could you post those part numbers?

Here are the part numbers of the cables. Note that I checked both sets on the two racks I have here as well as the set from the Tezro and all three sets have the same part number detail on the label as follows;
'White' Cable: 018-0985-001 Rev B 03.42 UFI Code: 2134
'Black' Cable: 018-0946-001 Rev B 04.03 UFI Code: 2134

If you have the OEM cables that from from the "TMDS Video Output" ports on the DG5/TVO (in the G-Brick) to the matching ports on the VBoB, and those cables happen to be labeled with an SGI part number, could you post those part numbers?

I missed the mark with the last reply and inadvertently gave you the P/N's for the LVDS cables NOT the TMDS cables so take 2!
'White' Cable: 018-0997-001 Rev A NSIA 4503
'Black' Cable: 018-0996-001 Rev A NSIA 4803
Headshell says 'Molex'

Hi Jan-jaap,

my Onyx2 TVO option to a DMedia breakout w./ DM5 in the past

So what do you use your system for? Sounds like you are geared up for video work?
Regards

Hi,
Its a bit of a belated response but congrads on your pickup. Its nice to see more machines rescued and undergoing refurbishment rather than making land fill. I have 3 02s here in Hobart plus a few parts so it would be great to keep in touch.
Regards
John