The collected works of sadness

i'm trying to resurrect an old control data cyber 910-200
(sgi indigo) which was aquired as broken (do not power on)
(and after the italian postal service treatment is _really_ broken,
see photos of the smashed poor little indigo at http://www.unsupported.info/smashed_indigo/ )

i need the power supply connector pinout, i'm thinking of
using a standard atx power supply to power on and test
the machine

thanks

Intel-OUTSIDE wrote: make sure you know the voltages supplied by the old psu, i think they are different from atx.

i have never seen the data you want, but there was a website with data in challenge-s psu,

here is a past:
....

if your old psu wont start then change the small electrolytic capacitors.

oh i know the page with the challenge-s/indy atx power supply rewiring,
i have done this years ago for a friend's indy (that is currently in use
with the atx supply mounted in the original power supply enclosure)
(was the first sgi in my hands )

however i'm not searching the pinout anymore, just repaired the old
psu, a shorted bridge rectifier in the primary section of the psu and two
missing fuse (and some sign of a previus reparation attempt), there
some weak electrolytic capacitors but the psu is happy (i will replace
later, maybe this night)

now the machine in up & running over serial console, need to make
an indigo - ps2 adapter one of these days, now it's time to search for
an r4k indigo mb, r4k4 150Mhz pm2 cpu and an elan (and to send a
formal complain to the italian postal service for the damage)