Nekonomicon - Skysearcher

Skysearcher
Who joined April 2, 2012, 2:19 p.m.

Wrote on the subject of WTT: Onyx2 (The Netherlands) at April 27, 2012, 10:07 a.m...

Hi all,

I want to trade my Onyx2 for a more compact and less bulky model, the Onyx2 is a great machine,
but way to heavy for my bad back and too big for my house.

It is installed with a fresh copy of Irix 6.5.30 and a fresh copy of Maya 6.5. This Onyx2 has no skins.
Three HDD of 9,2 gb each. One disk with 6.5.30, one with 6.5.2 (and stuff from NOS/NOB) and one
empty drive.

Hinv -v

Code: Select all


   4 250 MHZ IP27 Processors
   

   CPU: MIPS R10000 Processor Chip Revision: 3.4
   

   FPU: MIPS R10010 Floating Point Chip Revision: 3.4
   

   CPU 0 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
   

   Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
   

   CPU 1 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
   

   Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
   

   CPU 2 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
   

   Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
   

   CPU 3 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
   

   Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
   

   Main memory size: 512 Mbytes
   

   Instruction cache size: 32 Kbytes
   

   Data cache size: 32 Kbytes
   

   Secondary unified instruction/data cache size: 4 Mbytes
   

   Memory at Module 1/Slot 82: 256 MB (enabled)
   

   Bank 0 contains 256 MB (Standard) DIMMS (enabled)
   

   Memory at Module 1/Slot 81: 256 MB (enabled)
   

   Bank 0 contains 256 MB (Standard) DIMMS (enabled)
   

   Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
   

   Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
   

   Disk drive: unit 1 on SCSI controller 0 (unit 1)
   

   Disk drive: unit 2 on SCSI controller 0 (unit 2)
   

   Disk drive: unit 3 on SCSI controller 0 (unit 3)
   

   CDROM: unit 6 on SCSI controller 0
   

   IOC3/IOC4 serial port: tty5
   

   IOC3/IOC4 serial port: tty6
   

   IOC3/IOC4 serial port: tty7
   

   IOC3/IOC4 serial port: tty8
   

   IOC3/IOC4 serial port: tty9
   

   IOC3/IOC4 serial port: tty10
   

   IOC3/IOC4 serial port: tty1
   

   IOC3/IOC4 serial port: tty2
   

   IOC3/IOC4 serial port: tty3
   

   IOC3/IOC4 serial port: tty4
   

   IOC3 parallel port: plp1
   

   Graphics board: InfiniteReality2E
   

   Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0
   

   Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1
   

   Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2
   

   Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3
   

   Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
   

   Iris Audio Processor: version RAD revision 7.0, number 1
   

   Origin BASEIO board, module 1 slot 1: Revision 4
   

   PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
   

   PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
   

   Origin MENET board, module 1 slot 3: Revision 3
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
   

   PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
   

   PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
   

   PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
   

   PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
   

   IOC3/IOC4 external interrupts: 1
   

   HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
   

   HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
   

   IP27prom in Module 1/Slot n2: Revision 6.156
   

   IP27prom in Module 1/Slot n1: Revision 6.156
   

   IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156

/usr/gfx/gfxinfo/

Code: Select all


   Graphics board 0 is "KONAL" graphics.
   

   Managed (":0.0") 1280x1024
   

   Display has 2 channels
   

   4 GEs (of 4), occmask = 0x0f
   

   4MB external BEF ram, 32bit path
   

   1 RM9 board (of 1) 1/0/0/0
   

   Texture Memory: 64MB/-/-/-
   

   Medium pixel depth
   

   32K cmap
   

   GVO option detected
   

   Channel 0:
   

   Origin = (0,0)
   

   Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo)

uname -aR

Code: Select all


   IRIX64 IRIS 6.5 6.5.30f 07202013 IP27

PM me for offer.

previously owned ---> :Onyx2:

other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

Skysearcher
Who joined April 2, 2012, 2:19 p.m.

Wrote on the subject of WTT: Onyx2 (The Netherlands) at April 30, 2012, 11:29 a.m...

Succesfully trade with SGINERD ;-)

previously owned ---> :Onyx2:

other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

Skysearcher
Who joined April 2, 2012, 2:19 p.m.

Wrote on the subject of UPDATED 5-20-2012 Huge SGI collection FOR SALE Netherlands at May 8, 2012, 1:16 p.m...

I've got a great looking O2 from SGINERD ! thanks JJ.

previously owned ---> :Onyx2:

other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

Skysearcher
Who joined April 2, 2012, 1:19 p.m.
and authored 45 notes

Wrote on the subject of Signature line computer icons. at May 12, 2012, 12:30 p.m...

WOW! these icon signatures are great, thanks !!

_________________
:1600SW:

previously owned ---> :Onyx2:

other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

The collected works of Skysearcher