FlasBurn wrote:
how much do you want for one board and can you provide pictures?
which of them ? Sandpoint-X3? Ebony?
Sandpoint-X3-mobo, with a 74xx CPU module
Sandpoint-X3-block
Features
-
integrated host processor
-
JTAG connector on PMC module
-
One PMC slot on motherboard to accept processor PMC modules
-
Switch-selectable modes
-
Four 5V 32-bit PCI slots at 33 MHz
-
Two standard 16650-compatible serial ports
-
IEEE 1284 parallel port
-
NVRAM and real-time clock (RTC)
-
Two IDE ports
-
LED monitors critical functions
-
Advanced Power Controller ("soft on/off")
-
PCI slot attached on Winbond W83C553F
&& 2.6.19 ramrootfs/uclibc microroot screenshot
Code:
Select all
## ## ##
## ## ##
## ##
####### ## ####### ## ##
## ## ## ## ## ## ##
## ## ## ## ## ######
## ## ## ## ## ## ##
###### ## ## ## ## ##
( ( ( ( (AltiVec) ) ) ) )
Version : 13.1.1, Metaware Build
Released : May 13, 2003 Built on May 13 2003 13:09:37
Written by : Motorola's RISC Applications Group, Austin, TX
System : Sandpoint X3 with Gyrus (MPMC7445)
Processor : MPC7445 V3.4 @ 500 MHz, 100 MHz memory
Memory : Map B (CHRP) 128MB at CL=2
Copyright Motorola Inc. 1993-2003
Refer to `history.c' for release info, changes, errata and fixes.
DINK32[MPC7445] {1} >>
DINK32[MPC7445] {1} >>dl -nw -b -of00000 -fgentoo-sandpoint.img
Filename = gentoo-sandpoint.img
File format = Plain binary
Offset = 0x00F00000
Received 10023 TFTP data blocks.
Successfully read 5131728 bytes via TFTP at 1968216 bytes/sec
DINK32[MPC7445] {2} >>go f10000
[*] dink32 kernel wrapper simple
load_kernel : decompress_kernel to be hooked into
load_addr : 00F10000 013E6134
loaded at : 00F10000 013E6134
relocated to : 00F00000 013D6134
zimage at : 00F05F5C 013D3022
initrd at : 013D4000 013D4000
addressable : 00000000 03FFFFFF
avail ram : 013D7000 02000000
decompress at : 00000000 00F00000
kernel/PPC cmdline="console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash"
Uncompressing kernel...done.
kernel jump
Total memory = 64MB; using 128kB for hash table (at c0640000)
Linux version 2.6.22-manatnees-batman-sandpoint (root@minerva) (gcc version 4.10
Motorola SPS SandpointX3 Development Platform
Zone PFN ranges:
DMA 0 -> 16384
Normal 16384 -> 16384
early_node_map[1] active PFN ranges
0: 0 -> 16384
Built 1 zonelists. Total pages: 16256
Kernel command line: console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash
OpenPIC Version 1.2 (1 CPUs and 22 IRQ sources) at fdfd0000
OpenPIC timer frequency is 100.000000 MHz
PID hash table entries: 256 (order: 8, 1024 bytes)
time_init: decrementer frequency = 24.358758 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 58392k available (1924k kernel code, 616k data, 3832k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
chardev-mac: chardev attached to /dev/chardev-mac c 252 0.
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 4) is a NS16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a NS16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
8139too Fast Ethernet driver 0.9.28
eth0: RealTek RTL8139 at 0xbffe00, 00:e0:5c:00:29:89, IRQ 21
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: SAMSUNG WNR-31601A (1600MB), ATA DISK drive
ide0 at 0xbffff8-0xbfffff,0xbffff6 on irq 14
hda: max request size: 128KiB
hda: 3145968 sectors (1610 MB) w/256KiB Cache, CHS=3121/16/63
hda: [mac] hda1 hda2 hda3 hda4
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc-test rtc-test.0: rtc core: registered test as rtc0
rtc-test rtc-test.1: rtc core: registered test as rtc1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-test rtc-test.0: setting the system clock to 2010-02-18 04:32:26 (126646754)
Freeing unused kernel memory: 3832k init
[*] mount
[*] ttykeymaps
/dev/tty0 /dev/tty1 /dev/tty2 /dev/tty3 /dev/tty4 /dev/tty5 /dev/tty6 /dev/tty7
/dev/ttyS0 /dev/ttyS1
[*] clock
[*] machine-identify
[*] hostname
[*] networking
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[*] telnetd
[*] env-shared-libraries
[*] tiniweb
[*] issue
[*] sftp-server
[*] sshd
e a r l y r a m r o o t f s
i n s e r t c o i n s p l e a s e
,,,,
$$$$$$
$$$$$$$$$
$$$$$$$$$$$ ,,
$$$$$$$$$$$$ $$$$$,
`$$$$$$$$$$$ $$$$$$$$
`$$$$$$$$$Z$ $$$ $$$ $$$$$$$$`
`$ZzZ$$$Z$$$ $$$$$$$ $$$$$$$ $$$$$$$$`
`$$$ZZZ$$$$$ $$$$$$$$$ $$$$$$$$$ $$$$$$$$`
`$$$$$$$$$$ $$ZZ$$$$$ $$ZZZ$$$$ $$$$$$$$
u$$$$$$u `$$$$$$$$$$ $$$ZZZ$$ $$$$$ZZ$$ $$$$$$$`
$$$$$$$$$$Z$ `$ZZ$$$ZZZ $$$$$$$$ $$$$$$$$$ $$$$$$
$$$$$$$$$$$Z$$$$ $$$$zzz$$$ $$$$$$$$ $$$$$$$$$ $$$$$$`
$$$$$$$$$$Z$$$$$$$$$$$$$$$$$ $$ZZ$$$$ $ZZZ$$$$$ $$$$$`
`$$$$$$$Z$$$$$$$$$$$$$$$$$ $$$$$ZZ$ $ $$$$$$$ $$$$$`
`$Z$$$$$$$$$$$$$$$$$$ $SB$$$ $$ $$$$$$ $$$$`
`$$$$$$$$$$$$$$$$$$$,````,$$$$, ````,$$$$`
`$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$`
`$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$`
`$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$`
`$$$$$$$$$$$$$$$$ $$$$$$$$$$`
`$$$$$$$$$$$$$$$$ $$$$$$$`
$$$$$$$$$$$$$$$$$$$$$$
P o w e r u c m a c h i n e
genuine interest in the u' n i x platform
genuine appreciation of solid engineering
Sandpoint-X3-7445 login: root
Password: **************
Y O U H A V E T H E P O W E R U S E C A R E F U L L Y
SandPoint-X3-7445 #
I also have a NIC for sale, the Sandpoint X3 board needs a specific NIC because DINK32 has a restricted compatibility list
the ebony board looks similar, its firmware has a few bugs
-
ram0 is working, ram1 is not working and (if inserted) it causes uboot-1.3 to freeze
-
tftpboot has a buffer overflow, that limits the max amount of download to 2Mb
I do not have a jtag equipment on hand, and no time to fix these issues
I can also try to provide a little PPC405GP
*** give me an offer ***
also you can consider these auctions from ebay
R12K/400 Octane, 1024MB, 36GB 15K MAX3036NC , MXI
!