Hardware For Sale/Trade

Octane2 + vbob + Stone For Sale (No software....)

This is what I have:

Octane2 with 4GB RAM, Dual 600mhz R14000 procs, Dual 72GB Atlas 10K Hard Drives Internal
Odyssey Graphics, PCI Card Cage (however, might be bad), 1GBit Fiber Ethernet Adapter
Dual Copper Fibre Channel Adapter
SGI video break out box with two long dual LVDS cables
Stone with 8 Discreet-firmware official Seagate ST318304FC drives and 2 standard-firmware ST31804FC drives
Two dead Discreet drives and another spare ST31804FC drive can be included!
SGI keyboard, SGI mouse (new style, clean)

I can include a possible DM10 Firewire knockoff card and the Wacom tablet as well.

If you'd like, I'm also happy to include the Dell 2005FPW 1680x1050 20" wide screen monitor with appropriate cable for it, it works well together.

Sorry, the SGI 24" widescreen had an ugly death, it'd be a pain to ship, anyways!

I'd prefer someone in the Washington or Oregon areas so it could be driven, but I'm willing to ship if the price is right.

Typing this message from it right now, it works great.

hinv:
2 600 MHZ IP30 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 4096 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0
Disk drive: unit 2 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 4
Disk drive: unit 1 on SCSI controller 2
Disk drive: unit 2 on SCSI controller 2
Disk drive: unit 4 on SCSI controller 2
Disk drive: unit 5 on SCSI controller 2
Disk drive: unit 6 on SCSI controller 2
Disk drive: unit 7 on SCSI controller 2
Disk drive: unit 8 on SCSI controller 2
Disk drive: unit 9 on SCSI controller 2
Disk drive: unit 10 on SCSI controller 2
Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 4
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
XT-DIGVID Multi-standard Digital Video: controller 0, unit 0, version 0x0

gfxinfo:
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1696x1056
BUZZ version B.1
PB&J version 1
128MB memory
Banks: 4, CAS latency: 3
Monitor 0 type: Unknown
Channel 0:
Origin = (0,0)
Video Output: 1680 pixels, 1050 lines, 60.00Hz (1680x1050_60)

Questions/comments let me know!
And in case anyone wanted desperately to offer me to sell the stone separately:

krusty 113# ./stone_test -w
This option will destroy the filesystem.
Do you wish to continue [n]y: y

Partition /dev/swr00 capacity = 35960205 per disk, 8 data disks
frame = 1052672 bytes (2056 blocks) frame_interval = 257
4 concurrent I/O requests, 300 frames:
Head, forward : 81.06 MB/S 80.7 frames/sec
Tail, forward : 80.88 MB/S 80.6 frames/sec
Head, backward : 78.97 MB/S 78.7 frames/sec
Tail, backward : 77.57 MB/S 77.3 frames/sec
Thrash forward : 63.95 MB/S 63.7 frames/sec
Thrash backward: 61.36 MB/S 61.1 frames/sec
Random : 66.78 MB/S 66.5 frames/sec
Skip 2, forward: 76.34 MB/S 76.0 frames/sec
Skip 2, back : 77.33 MB/S 77.0 frames/sec
Skip 3, forward: 80.29 MB/S 80.0 frames/sec
Skip 3, back : 77.00 MB/S 76.7 frames/sec
Where are you at??
Portland,OR. I'd even deliver to Vancouver, BC if someone would house me over the weekend. :-)
PM sent

Richard
I am interested,

located in socal, I need some backup hardware,

thanks,

MB