Nekonomicon - ONYX IR Deskside 4x195 R10K 2MB,2GB, 4 RM6-16, ASO, Sirius

archaic
From Houston, TX
Who joined March 8, 2004, 9:28 p.m.

Wrote the following at Aug. 30, 2005, 10:38 p.m...

I finally got it upgraded !!!! Much thanks to Joe Gill for the PAB2 to get the Sirius connected!!

EDIT: Might as well update it while I've got it on. It never got updated with the ASO and Sirius.

Code: Select all


   CPU Board at Slot 2: (Enabled)
   

   Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
   

   Processor 1 at Slot 2/Slice 1: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
   

   Processor 2 at Slot 2/Slice 2: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
   

   Processor 3 at Slot 2/Slice 3: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
   

   CPU: MIPS R10000 Processor Chip Revision: 3.1
   

   FPU: MIPS R10010 Floating Point Chip Revision: 3.1
   

   Main memory size: 2048 Mbytes, 2-way interleaved
   

   MC3 Memory Board at Slot 1: 2048 MB of memory (Enabled)
   

   Bank A contains 64 MB SIMMS (Enabled)
   

   Bank B contains 64 MB SIMMS (Enabled)
   

   Bank C contains 64 MB SIMMS (Enabled)
   

   Bank D contains 64 MB SIMMS (Enabled)
   

   Bank E contains 64 MB SIMMS (Enabled)
   

   Bank F contains 64 MB SIMMS (Enabled)
   

   Bank G contains 64 MB SIMMS (Enabled)
   

   Bank H contains 64 MB SIMMS (Enabled)
   

   Instruction cache size: 32 Kbytes
   

   Data cache size: 32 Kbytes
   

   Secondary unified instruction/data cache size: 2 Mbytes
   

   Integral SCSI controller 0: Version WD33C95A, differential, revision 0
   

   Integral SCSI controller 1: Version WD33C95A, single ended, revision 0
   

   Disk drive: unit 1 on SCSI controller 1 (unit 1)
   

   Disk drive: unit 2 on SCSI controller 1 (unit 2)
   

   CDROM: unit 4 on SCSI controller 1
   

   Tape drive: unit 7 on SCSI controller 1: DLT
   

   ASO 6-port Serial board 0: revision 2.255.255, Ebus slot 3, IO Adapter 5
   

   Integral EPC serial ports: 4
   

   Integral EPC parallel port: Ebus slot 3
   

   Graphics board: InfiniteReality
   

   Integral Ethernet controller: et0, Ebus slot 3
   

   I/O board, Ebus slot 3: IO4 revision 1
   

   Sirius video: unit 0 revision 5 on bus 0 with CPI DGI options
   

   VME bus: adapter 13
   

   VME bus: adapter 0 mapped to adapter 13
   

   EPC external interrupts

Code: Select all


   Graphics board 0 is "KONAS" graphics.
   

   Managed (":0.0") 2048x1120
   

   Display has 2 channels
   

   4 GEs (of 4), occmask = 0x0f
   

   4MB external BEF ram, 32bit path
   

   4 RM6 boards (of 4) 1/1/1/1
   

   Texture Memory: 16MB/16MB/16MB/16MB
   

   Large pixel depth
   

   32K cmap
   

   Sirius video option detected
   

   Channel 0:
   

   Origin = (0,0)
   

   Video Output: 2048 pixels, 1120 lines, 72.00Hz (2048x1120_72.vfo)

Patrick

- That's what she said -

guardian452
From Kentucky, United States
Who joined Aug. 21, 2007, 10:12 p.m.

Wrote the following at May 27, 2009, 7:32 p.m...

interesting, how does it like the 4 rm6 boards? Most docs say you can only have two in a deskside due to power/cooling requirements.

er... mind the date...

Thinkpad x220 Slack + DWM

Google: Don't Be Evil. Apple: Don't Be Greedy. Microsoft: Don't Be Stupid.

recondas
Moderator
From NC - USA
Who joined June 6, 2004, 5:55 p.m.

Wrote the following at May 28, 2009, 3:09 a.m...

sybrfreq wrote: er... mind the date...

Patrick's last sign-in was February 2006.....

***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

archaic
From Houston, TX
Who joined March 8, 2004, 9:28 p.m.

Wrote the following at Oct. 20, 2009, 9:05 p.m...

sybrfreq wrote: interesting, how does it like the 4 rm6 boards? Most docs say you can only have two in a deskside due to power/cooling requirements.

er... mind the date...

It seems to like it fine. As long as you channel the air over the Power boards it seems to be no big deal. I have a half finished extended power board box from about 5 years ago. I am swapping cards right now, and the RMs and the GE were not even warm after being on for a few hours. Wish I could put six it it.

I am looking for slot assignments for two RMs right now. Cheers.

Patrick

- That's what she said -

guardian452
From Kentucky, United States
Who joined Aug. 21, 2007, 10:12 p.m.

Wrote the following at Oct. 28, 2009, 4:33 p.m...

Did you ever try and run 4RM6s with just two 303 power boards? It should be possible as that would put out the same 3.3V amperage as two 2x305 boards. Of course you lose the surplus 5V power for the VME slots...

Also, I am guessing you are running 240V?

Thinkpad x220 Slack + DWM

Google: Don't Be Evil. Apple: Don't Be Greedy. Microsoft: Don't Be Stupid.

archaic
From Houston, TX
Who joined March 8, 2004, 9:28 p.m.

Wrote the following at Nov. 6, 2009, 10:16 a.m...

sybrfreq wrote: Did you ever try and run 4RM6s with just two 303 power boards? It should be possible as that would put out the same 3.3V amperage as two 2x305 boards. Of course you lose the surplus 5V power for the VME slots...

Also, I am guessing you are running 240V?

I never had any single 303 power boards. My Onyx was an RE2 with Sirius from Baylor Medical. I got the IR stuff out of a rack system and upgraded it.

Patrick

- That's what she said -

SGI: hinv

ONYX IR Deskside 4x195 R10K 2MB,2GB, 4 RM6-16, ASO, Sirius