SGI: hinv

Octane dual R10000 195 mhz 1g ram V6

sybrfreq avatar
sybrfreq
Old Salt
Who joined Aug. 21, 2007, 10:12 p.m.
and authored 1647 notes
Wrote the following at Feb. 9, 2008, 9:32 a.m...
Code:
mark@PerfectChaos ~ $ hinv -vm
Location: /hw/node
PM20 Board: barcode ENE950     part 030-0890-003 rev  G
Location: /hw/node/xtalk/15
IP30 Board: barcode EAX320     part 030-0887-005 rev  B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode DKN962     part 030-0891-003 rev  A
PWR.SPPLY.SR Board: barcode AAA7170133 part 060-0028-003 rev  A
Location: /hw/node/xtalk/12
GM20 Board: barcode DZD138     part 030-0957-003 rev  N
2 195 MHZ IP30 Processors
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 2.7
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 4 on SCSI controller 1
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: MXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3
mark@PerfectChaos ~ $ /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 2, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E, Heart rev D
19" monitor (id 0x1)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)


I also have a granite keyboard & mouse and a gdm-20d11 granite monitor, and octane speakers (which kinda really suck) hooked up to this system.

_________________
:Onyx: (Aldebaran) :Octane: (Chaos) :O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)
sybrfreq avatar
sybrfreq
Old Salt
Who joined Aug. 21, 2007, 10:12 p.m.
and authored 1647 notes
Wrote the following at Aug. 21, 2009, 12:44 p.m...
upgraded graphics and new irix install:


Code:
chaos 18# hinv -vm
Location: /hw/node
PM20 Board: barcode ENE950     part 030-0890-003 rev  G
Location: /hw/node/xtalk/15
IP30 Board: barcode EAX320     part 030-0887-005 rev  B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode DKN962     part 030-0891-003 rev  A
PWR.SPPLY.SR Board: barcode AAA7170133 part 060-0028-003 rev  A
Location: /hw/node/xtalk/11
ODY32 Board: barcode KWC425     part 030-1403-003 rev  A
2 195 MHZ IP30 Processors
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 2.7
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 4 on SCSI controller 1
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3
chaos 19# /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

_________________
:Onyx: (Aldebaran) :Octane: (Chaos) :O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)
bigD avatar
bigD
Addict
Who joined June 17, 2008, 8:38 p.m.
and authored 317 notes
Wrote the following at Aug. 21, 2009, 12:49 p.m...
Sweet! Hope you're enjoying it. Do you notice a difference in speed between MXI and V6?

_________________
:Onyx2: :Octane2: :Indigo2: :0300:
Onyx2, 4x400 MHz, IR3 // Origin 300, 4x600MHz
Octane2, 2x400 MHz, V12 // Indigo2, 200 MHz, Extreme
sybrfreq avatar
sybrfreq
Old Salt
Who joined Aug. 21, 2007, 10:12 p.m.
and authored 1647 notes
Wrote the following at Aug. 21, 2009, 2:16 p.m...
bigD wrote:
Sweet! Hope you're enjoying it. Do you notice a difference in speed between MXI and V6?


I haven't noticed much of a difference, but haven't been able to do much with it yet as I'm still getting the OS sorted out. Some 3d demos I tried seem much smoother than before; the big reason for the upgrade was so textured objects (especially games and videos) wouldn't have a scanlined appearance due to faulty tram.

also I think the power consumption is (maybe?) a bit lower.

_________________
:Onyx: (Aldebaran) :Octane: (Chaos) :O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)
indyman007 avatar
indyman007
Addict
Who joined Aug. 20, 2008, 5:38 a.m.
and authored 831 notes
Wrote the following at Aug. 22, 2009, 12:32 a.m...
sybrfreq wrote:
I also have a granite keyboard & mouse and a gdm-20d11 granite monitor, and octane speakers (which kinda really suck) hooked up to this system.

Soon I will have a pair of Gigaworks T20 Series IIs hooked up to mine.

_________________
:Indy: R4600PC 133 MHz

Emachines PC 3.0GHz Dual Core (Intel)
Custom Built Ubuntu PC 1.207GHz (AMD)
Mac G4 1.25GHz
sybrfreq avatar
sybrfreq
Old Salt
Who joined Aug. 21, 2007, 10:12 p.m.
and authored 1647 notes
Wrote the following at Oct. 19, 2009, 5:40 p.m...
bigD wrote:
Sweet! Hope you're enjoying it. Do you notice a difference in speed between MXI and V6?


oh yeah, it's sweeter, badder, and just plain faster all around. (now that I've had a few months to wear it in ;) ) But a big reason for upgrading was to get rid of the MXI scanlines in textured windows, especially mplayer videos. Should have gone with a v8 though, the low color depth (I believe that is causing the dithering??) is a bit noticable for some things. In places I wouldn't expect to notice it, like fast-paced games such as quake2 and bzflag.

Now I need a faster pair of processors. Boy do I <3 my octane. All the other computers can go pound sand, I love my octane. :)


indyman007 wrote:
Soon I will have a pair of Gigaworks T20 Series IIs hooked up to mine.
Well, if you must know, there is currently a pair of Mackie SRM450s just a rockin' but that is only a temporary setup. Normally I use a shure psm200 in-ear but sometimes you need to let a friend listen, and the octane speakers are perfectly adequate for getting a tune across.

_________________
:Onyx: (Aldebaran) :Octane: (Chaos) :O2: (Machop)
:hp xw9300: (Aggrocrag) :hp dv8000: (Attack)