SGI: hinv

Octane EMXI 2xR10000 195MHZ 1GB

uunix
Donor
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 21, 2017, 4:49 a.m...
So this machine was a pretty bog standard Octane2 with a 1.3 XBOW. The skins are a bit shabby though I must admit.
Added Digital Video, Fibre Channel (awaiting connectors) and EMXI Graphics, and a new motherboard, since the PS/2 connectors were slack/loose on the old one. This also has a floppy in it.
Hinv

Code: Select all

OCTANE02 2# hinv -vm
Location: /hw/node
PM20 Board: barcode GGB217     part 030-0890-003 rev  H
Location: /hw/node/xtalk/15
IP30 Board: barcode HXY928     part 030-1467-001 rev  B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode 42452C     part 030-0891-003 rev  E
PWR.SPPLY.ER Board: barcode AAE9160539 part 060-0035-002 rev  A
Location: /hw/node/xtalk/12
MOT20 Board: barcode HPC357     part 030-1240-003 rev  E
Location: /hw/node/xtalk/11
GALILEO15 Board: barcode HLX484     part 030-0931-004 rev  C
Location: /hw/node/xtalk/9
FIBRE_CHANNEL Board: barcode HPB031     part 030-0927-003 rev  D
2 195 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R10000 Processor Chip Revision: 2.7
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
Digital Video: unit 1, revision 5.2, TMI: revision 2, CSC: revision 1

GFXINFO

Code: Select all

OCTANE02 3# /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E,
VC3 rev A, CMAP rev E, Heart rev F
unknown, assuming 19" monitor (id 0x9)
Video board present

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------
Y888099
Who joined July 11, 2016, 11 a.m.
Wrote the following at March 21, 2017, 5:39 a.m...
I don't get your logical. Why are you collecting so many octane-units? Are you going to build a cluster? Willing to offer a rendering farm service dedicated for Maya? so you make your rendering x hundred times faster?

What's your hidden secret plan?
Head Full of Snow. Lemon Scented You
uunix
Donor
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at March 21, 2017, 5:44 a.m...
World domination.

I've actually only got three working Octanes, it's my build up of o2's that I'm worried about. I seem to be attracting those rather rapidly (6 at last count).
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------