SGI: hinv

Fuel | 800mhz | 1GB | V12

It had some stickers over the case to prevent tampering. The seller said it was used by the government but I have no info beyond that. It has a clean install of 6.5.30. I still need to set up a user and get some software on this guy. :)



hinv

Code: Select all

Location: /hw/module/001c01/node
IP34 Board: barcode NRZ574     part 030-1707-005 rev -B
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode NPJ964     part 030-2024-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODY Board: barcode MZK255     part 030-1726-005 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode NRZ574     part 030-1707-005 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode NRZ574     part 030-1707-005 rev -B
1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 3.0. Scache: Size 4 MB Speed 400 Mhz  Tap 0xb
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI



gfxinfo

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version B.2
PB&J version 1
128MB memory
Banks: 4, CAS latency: 3
Monitor 0 type: DEL 16404
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  DEL-16404
Gain (all color components) - 0.000000 ; range [1,10]
Sexy Fuel is sexy.
smit happens.

:Fuel: bigred , 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy , 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze , 175MHz R10000, Solid IMPACT
probably posted from Image bruce , Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * HP C8000 * BeBox * Solbourne S3000 * Commodore 128 * many more...
That is a very nice Fuel indeed! Good skins and excellent spec too.
Systems in use:
:Indigo2IMP: - Nitrogen : R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium : R14000 600MHz CPU, 4GB RAM, V10 Graphics, 36GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other systems in storage: :O2: x 2, :Indy: x 2
Wow looks brand new. Very nice.