SGI: hinv

chicaneuk's old o2

uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at Jan. 28, 2015, 1:33 p.m...

Code: Select all

Xo2 3# hinv -v
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
1 300 MHZ IP32 Processor
Main memory size: 448 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
Disk drive: unit 2 on SCSI controller 0 (unit 2)
CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
PCI Adapter ID (vendor 0x10cd, device 0x1300) PCI slot 3
Video: MVP unit 0 version 1.4
AV: AV2 Card version 0, Camera not connected.
Vice: TRE
1600SW Flat Panel adapter board and display.

Code: Select all

Xo2 4# /usr/gfx/gfxinfo
Graphics board 0 is "CRM" graphics.
Managed (":0.0") 1600x1024
32 + 32 bitplanes
board revision 2, CRM revision C, GBE revision B
Timing table flags:
Monitor 0 type: Unknown
Channel 0:
Origin = (0,0)
Video Output: 1600 pixels, 1024 lines, 50.00Hz (1600x1024_50p)


Added bit more memory, 1600sw adapter & tonight an A/V2 board. (will be seeing what that can do later, first I have new PSU's for my OCTANES.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:O2: :1600SW: :O2: :1600SW: :Octane2: :1600SW: :1600SW: :Octane2: :Octane: :Indy: :540:
chicaneuk
Who joined July 10, 2012, 3:48 a.m.
Wrote the following at Feb. 5, 2015, 1:53 a.m...
Nice :) Hope it's running well. See you bumped the RAM a smidgin as well.
:Indigo2: :Indigo2IMP: :Indy: :Octane2: :O200:
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at Feb. 5, 2015, 6:31 a.m...
It is indeed, currently playing with the new A/V2 card, but she hasn't missed a beat.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:O2: :1600SW: :O2: :1600SW: :Octane2: :1600SW: :1600SW: :Octane2: :Octane: :Indy: :540:
gocram
From The Netherlands
Who joined July 30, 2014, 7:15 a.m.
Wrote the following at Feb. 5, 2015, 1:24 p.m...
Very nice O2, similar to one of mine. By the way, does it have a hypercube or ‘new logo’ shell? Did you also already try patching an output into your VBOB? (I thought of your other thread just now.)
:O2: :O2: :O2: :O2: :Indigo2IMP: :Indigo2: | PREVIOUSLY ALSO... :O3200: :Tezro: :Indigo2:
uunix
From Stourbridge / England / UK
Who joined March 27, 2011, 12:48 p.m.
Wrote the following at Feb. 5, 2015, 1:39 p.m...
It's the new logo, and yes I did (Live Output), it produces on the VBOB Console nothing @ any setting.. PAL 625, Pal 625 Square, NTSC etc, input though from the VBOB does produce the test signal (well it did until now, but then again, I'm cloning a disk on the controlling Octane, so it may not be initialized etc).

I know though it does output, as some strange combination last week or so produced a mini version of the o2's desktop.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:O2: :1600SW: :O2: :1600SW: :Octane2: :1600SW: :1600SW: :Octane2: :Octane: :Indy: :540: