SGI: hinv

Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0023529   part              rev
8P12_MPLN Board: barcode JGZ976     part 030-0762-006 rev  M
IP31 Board: barcode JHL271     part 030-1255-004 rev  A
IP31PIMM8MB Board: barcode JDZ054     part 030-1401-002 rev  B
Location: /hw/module/1/slot/n2/node
IP31PIMM8MB Board: barcode JRL286     part 030-1401-002 rev  B
IP31 Board: barcode JRS441     part 030-1255-003 rev  D
Location: /hw/module/1/slot/n3/node
IP31PIMM8MB Board: barcode JSB033     part 030-1401-002 rev  B
IP31 Board: barcode DRA764     part 030-1255-003 rev  D
Location: /hw/module/1/slot/r1/router
ROUTER_IR1 Board: barcode HLY466     part 030-0841-003 rev  B
Location: /hw/module/1/slot/r2/router
ROUTER_IR1 Board: barcode HKM161     part 030-0841-003 rev  B
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode JKZ031     part 030-1124-002 rev  M
6 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 4 at Module 1/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 5 at Module 1/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 3072 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 1: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 3: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [3,4,5,6] (enabled)
ROUTER in Module 1/Slot 3: Revision 2: Active Ports [3,5,6] (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156