SGI: hinv

Octane 2xR10k 400MHz, 2048MB, V12+DM2+VOB

Hi,

The newest addition to my collection
Code:
hinv -vm
Location: /hw/node
PM20 Board: barcode KYA016     part 030-1476-002 rev  B
Location: /hw/node/xtalk/15
IP30 Board: barcode LKD614     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode KBE183     part 030-0891-003 rev  G
PWR.SPPLY.ER Board: barcode AAE0150158 part 060-0035-002 rev  A
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode MEJ121     part 030-0952-005 rev  E
Location: /hw/node/xtalk/11
ODY128VERSIONB Board: barcode KWG943     part 030-1611-001 rev  C
Location: /hw/node/xtalk/10
FIBRE_CHANNEL Board: barcode JKM842     part 030-0927-003 rev  E
Location: /hw/node/xtalk/9
XT-DIGVID Board: barcode MHX098     part 030-1653-002 rev  H
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 1 (unit 1)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
XT-DIGVID Multi-standard Digital Video: controller 0, unit 0, version 0x0
socrates 48% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version B.1
PB&J version 1
128MB memory
Banks: 4, CAS latency: 3
Monitor 0 type: Unknown
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.00Hz (1280x1024_75)



Attachment:
octane2.jpg
octane2.jpg [ 3.24 MiB | Viewed 523 times ]

Attachment:
oct2back.jpg
oct2back.jpg [ 3.6 MiB | Viewed 523 times ]

Attachment:
oct2setup.jpg
oct2setup.jpg [ 1.36 MiB | Viewed 548 times ]


Sorry for low photo quality -- mobile phone photos. I'll try to take some with a real camera!

f.

_________________
:Octane2: V12 | 2xR12k 400MHz,
:Octane: SI+TRAM + PVO | R12k 400Mhz,
:Indigo2IMP: R4400 250MHz | MAXImpact+Video4Impact
nice setup fock

did you sort the F190 w/ a proper 13w3 adapter?

just rotate the darn pics so we won't get any νευροκαβαλίκεμα :lol:
Hi Fu,

Pics rotated in order to avoid any physical injuries!!!

I made an adapter cable and works OK now, thanks!

f.

_________________
:Octane2: V12 | 2xR12k 400MHz,
:Octane: SI+TRAM + PVO | R12k 400Mhz,
:Indigo2IMP: R4400 250MHz | MAXImpact+Video4Impact