SGI: hinv

Fuel, 800Mhz, 2GB RAM, V10, ATX PSU

kubatyszko
From Tokyo
Who joined Nov. 12, 2011, 3:18 a.m.
Wrote the following at Sept. 19, 2012, 7:43 a.m...
It's been a while, and I guess everybody now knows I've had a Fuel for some time - time for a hinv :)

Hinv:

Code: Select all

Location: /hw/module/001c01/node
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode NPJ852     part 030-1932-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODYV10 Board: barcode NSP265     part 030-1826-003 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Premium) DIMMS (enabled)
Bank 3 contains 512 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version LS1030, low voltage differential
Integral SCSI controller 3: Version LS1030, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 1 on SCSI controller 1
Integral SCSI controller 4: Version SAS/SATA LS1064
Disk drive: unit 3 on SCSI controller 4 (unit 3)
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 1
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version EMU revision A3, number 1
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x1102, device 0x0004) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x7003) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x4001) PCI slot 2
PCI Adapter ID (vendor 0x1000, device 0x0050) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI



gfxinfo:

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1920x1088
BUZZ version B.2
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: BNQ 30988
(Could not contact X server; thus, no XSGIvc information available)



uname:

Code: Select all

IRIX64 TFuel 6.5 6.5.30m 07202013 IP35


scsicontrol:

Code: Select all

/dev/scsi/sc0d1l0:  Disk          FUJITSU MAW3073NP       0104
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing
Device is  ready
/dev/scsi/sc1d1l0:  CD-ROM        HP      DVD-ROM 305     1.01
ANSI vers 2, ISO ver: 0, ECMA ver: 0; supports:  synch
Device is  not ready

/dev/scsi/sc4d3l0:  Disk          ATA     WDC WD10EARS-22Y0A80
ANSI vers 5, ISO ver: 0, ECMA ver: 0; supports:  cmdqueing
Device is  ready


diskpatch:

Code: Select all

sc0d1l0:  Disk         FUJITSU MAW3073NP       0104  Serial: DAS0P6A0
sc4d3l0:  Disk         ATA     WDC WD10EARS-22Y0A80  Serial: WD


l1 serial:

Code: Select all

Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      EEPROM        08:00:69:10:83:93
Local Brick Serial Number       EEPROM        NSR361
Reference Brick Serial Number   NVRAM         NSR361


EEPROM      Product Name    Serial         Part Number           Rev  T/W
----------  --------------  -------------  --------------------  ---  ------
NODE        IP34            NSR361         030_1707_005          B    00
MAC         MAC ADDRESS     NA             NA                    NA   NA
PIMM        IP34PIMM        NPJ852         030_1932_001          B    00
XIO         ASTODYV10       NSP265         030_1826_003          A    00

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     7F94FFFFFFFFFFFF4C79C80D SM57264DSGI100C2   00FF   8.0  N/A
DIMM 2     CE00000000000000276B7700 M3 46L6510BT1-CA0   0B   10.0  N/A
DIMM 1     7F94FFFFFFFFFFFFAC79C80D SM57264DSGI100C2   00FF   8.0  N/A
DIMM 3     CE0000000000000028CDF200 M3 46L6510BT1-CA0   0B   10.0  N/A


l1 flash:

Code: Select all

Flash image A currently booted

Image      Status        Revision    Built
-----   -------------   ----------   -----
A     user default    1.38.9       07/26/2005 13:08:44
B     valid           1.38.9       07/26/2005 13:08:44


l1 env:

Code: Select all

Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.938
12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.992
3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.337
2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.466
5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.268
PIMM 12V BIAS    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.496
VCPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.255
PIMM 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.495
PIMM 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.268
PIMM 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.018
XIO 12V BIAS    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.812
XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.992
XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
XIO 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285

Description     State       Warning RPM  Current RPM
--------------- ----------  -----------  -----------
FAN  0  EXHAUST    Enabled          920         1654
FAN  1       HD    Enabled         1560         3068
FAN  2      PCI    Enabled         1120         2556
FAN  3    XIO 1    Enabled         1600         2537
FAN  4    XIO 2    Enabled         1600         2481
FAN  5       PS    Enabled         1349         1748

Advisory   Critical   Fault      Current
Description       State       Temp       Temp       Temp       Temp
----------------- ----------  ---------  ---------  ---------  ---------
0 NODE 0            Enabled    [Autofan Control]    80C/176F   45C/113F
1 NODE 1            Enabled    [Autofan Control]    80C/176F   47C/116F
2 NODE 2            Enabled    [Autofan Control]    80C/176F   38C/100F
3 PIMM              Enabled    [Autofan Control]    80C/176F   54C/129F
4 ODYSSEY           Enabled    [Autofan Control]    80C/176F   43C/109F
5 BEDROCK           Enabled    [Autofan Control]    85C/185F   49C/120F



Add-ons / mods:

*) Network card (tg1)
*) LSI SATA controller and 1TB disk
*) LSI SCSI card (used mostly for external ports - tape drive etc)
*) Audigy sound card
*) All fans replaced to reduce noise
*) ATX PSU (with my DIY converter cable, I also have original NMB PSU handy)

Casually hunting for a V12, DCD, RAM modules (512MB or 1GB Premium)

Cheers
[click for links to hinv] JP: :Fuel: | :O2: | :Indy: || PL: [ :Fuel: :O2: :O2+: :Indy: ]
ajw99uk
From Yorkshire, UK
Who joined April 19, 2011, 4:59 a.m.
Wrote the following at Sept. 19, 2012, 9:10 a.m...
"Casually hunting" is delightfully oxymoronic. I presume you've seen viewtopic.php?f=4&t=16726909 for 1GB modules - but do you have a particular reason for upgrading your standard 512's to premium? I thought there was no practical difference in a single CPU system?
Fuel ; Indigo2 ; Octane ; RiscPC Kinetic/448MB/RISCOS4.39 or Debian-etch; Dell Inspiron4100/P3 1GHz/1GB/Debian-stable; EspressoPC ViaC3/900MHz/256MB/Debian-testing; RPi B RISCOS5.23; Rpi2 Raspbian-jessie; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21; R140/35MHz/4MB/RISCOS3.11 or RISCiX1.21
kubatyszko
From Tokyo
Who joined Nov. 12, 2011, 3:18 a.m.
Wrote the following at Sept. 19, 2012, 3:39 p.m...
Yes I did and I'm pondering on that, might get them shipped to my parents in Poland - should be cheap from Sweden.
Regarding standard/premium - not sure if it matters with a single CPU or not, but since the "Speed" reading shows a value of 8 vs. 10 - I assume it's a CAS latency - regardless whether it's in clock cycles or nanoseconds, 8 is better than 10.
[click for links to hinv] JP: :Fuel: | :O2: | :Indy: || PL: [ :Fuel: :O2: :O2+: :Indy: ]
canavan avatar
canavan
Who joined July 21, 2003, 6:19 a.m.
Wrote the following at Oct. 27, 2012, 1:35 p.m...
Premium does not imply 8.0 of whatever they are (probably ns):

Code: Select all

Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
Bank 7 contains 1024 MB (Premium) DIMMS (enabled)

Code: Select all

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     7F94FFFFFFFFFFFFB30B680D SM57228DSGI100C2   00FF   8.0  N/A
DIMM 2     7F94FFFFFFFFFFFF5548501D SM57228DSGI100C2   00FF   8.0  N/A
DIMM 4     CE000000000000000CB84D00 M3 46L2820DT2-CA0   2D   10.0  N/A
DIMM 6     CE0000000000000027AA2E00 M3 46L2820BT1-CA0   0B    8.0  N/A
DIMM 1     7F94FFFFFFFFFFFFD548501D SM57228DSGI100C2   00FF   8.0  N/A
DIMM 3     7F94FFFFFFFFFFFF9548501D SM57228DSGI100C2   00FF   8.0  N/A
DIMM 5     CE000000000000000CB34D00 M3 46L2820DT2-CA0   2D   10.0  N/A
DIMM 7     CE0000000000000028561500 M3 46L2820BT1-CA0   0B    8.0  N/A