SGI: hinv

Octane2, 2*R14K 600Mhz, 5G RAM, V12, 73GB, GbE, QL1080

kubatyszko
Who joined Nov. 12, 2011, 3:18 a.m.
and authored 294 notes

Wrote the following at Feb. 18, 2012, 10:21 p.m...

Here goes, my new , perfect and almost fully beefed up Octane2.

hinv -mv

Code:

Location: /hw/node

PM20600MHZ Board: barcode NEX229     part 030-1778-001 rev  C

Location: /hw/node/xtalk/15

IP30 Board: barcode NJY476     part 030-1467-001 rev  L

Location: /hw/node/xtalk/15/pci/2

FP1 Board: barcode MCC044     part 030-0891-003 rev  H

PWR.SPPLY.ER Board: barcode AAE3400270 part 060-0035-003 rev  A

Location: /hw/node/xtalk/13

XTALKPCI Board: barcode MDH498     part 030-0952-005 rev  E

Location: /hw/node/xtalk/11

ODY128B1_2 Board: barcode NEJ187     part 030-1945-002 rev  B

2 600 MHZ IP30 Processors

Heart ASIC: Revision F

CPU: MIPS R14000 Processor Chip Revision: 2.4

FPU: MIPS R14010 Floating Point Chip Revision: 0.0

Main memory size: 5120 Mbytes

Xbow ASIC: Revision 1.4

Instruction cache size: 32 Kbytes

Data cache size: 32 Kbytes

Secondary unified instruction/data cache size: 2 Mbytes

Integral SCSI controller 0: Version QL1040B (rev. 2), single ended

Disk drive: unit 1 on SCSI controller 0 (unit 1)

DIsk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy

Integral SCSI controller 1: Version QL1040B (rev. 2), single ended

Integral SCSI controller 2: Version QL1080, low voltage differential

IOC3/IOC4 serial port: tty1

IOC3/IOC4 serial port: tty2

IOC3 parallel port: plp1

Graphics board: V12

Integral Fast Ethernet: ef0, version 1, pci 2

Gigabit Ethernet: eg1, PCI slot 3, firmware version 12.4.10

Iris Audio Processor: version RAD revision 12.0, number 1

PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2

PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0

PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1

PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 2

PCI Adapter ID (vendor 0x12ae, device 0x0002) PCI slot 3

Dual Channel Display

gfxinfo -vv

Code:

Graphics board 0 is "ODYSSEY" graphics.

Managed (":0.0") 1920x1088

BUZZ version B.2

PB&J version 1

128MB memory

Banks: 4, CAS latency: 3

Monitor 0 type: BNQ 30987

Dual Channel Display option

Monitor 1 type: unknown           Monitor 2 type: Unknown

Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False

Channel 0:

Origin = (0,0)

Video Output: 1920 pixels, 1080 lines, 60.00Hz (1920x1080_60_benq)

Video Format Flags:  (none)

Sync Disabled

Using Gamma Map 0

Monitor Type:  BNQ-30987

Gain (all color components) - 0.000000 ; range [1,10]

uname -aR

Code:

IRIX64 TOctane2 6.5 6.5.30f 07202013 IP30

scsicontrol -i /dev/scsi/*

Code:

/dev/scsi/sc0d1l0:  Disk          FUJITSU MAW3073NC       0104

ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports:  16bit synch linkedcmds cmdqueing

Device is  ready

diskpatch -v

Code:

sc0d1l0:  Disk         FUJITSU MAW3073NC       0104  Serial: DAL0P660

Updated 23.11.2012

*) Upgraded to 5GB RAM
*) Added FDD drive
*) Added DCD (haven't configured anything yet)
(DDS4 waiting for sled modifications)

_________________
[click for links to hinv] JP: [ :O200:

:Fuel: :Octane2: :Octane:

:O2: :Indy: :Indy:

] PL: [ :Fuel: :O2:

]
For Sale: 2*O200 M/B, 2*O200 PSU, 6*256MB O200 RAM, 2*O200 SCSI Backplane, 2*O200 MSC, DMediaPro DM-2 ( 030-1653-002 Rev. H , XT-DIGVID) with Octane XIO pull (Origin pull optionally available)

[[C|-|E]]
Who joined March 2, 2011, 1:37 a.m.
and authored 407 notes

Wrote the following at Feb. 19, 2012, 5:58 a.m...

I am jealous beyond words!, what a nice system!

Could you post some pics?

_________________

_ Betty Blue _
R12000A 400 Mhz ; 1 Gb RAM ; 72 Gb 15K HDD; IRIX 6.5.29
CrystalEyes; Dial Box; O2Cam "ZEYE"; external Toshiba SD-M1711 DVD-ROM; Octane speakers;
Lock bar; SGI microphone.
Mods: PSU Noctua fan; internal Toshiba SD-M1401 DVD-ROM; Adaptec AIC-7880P SCSI card.

_ REKIEM_I7 _
Seasonic X 1250W PSU / Intel I7 2600k 4 x 5,00 Ghz / 2 x Gainward 2Gb GTX 560Ti Phantom 2 / 32 Gb DDR3 / Intel x25-M 160 Gb SSD and 2 x 1,5 Tb HDDs
_ Lazarus _
2 x Intel Xeon MP Gallatin 3,00 Ghz with 4 MB cache / Zotac 512Mb GT430 / 12 Gb DDR266 ECC / 4 x Maxtor Atlas 146GB 10K V U320

kubatyszko
Who joined Nov. 12, 2011, 3:18 a.m.
and authored 294 notes

Wrote the following at Feb. 19, 2012, 6:30 a.m...

Will do sometime during the week,
I actually added more ram (it came with "only" 3.5GB), the QL1080(this one seems to be causing some issues - haven't investigated yet) and the disk is mine as well.
The O2 that came with it is also nice: R12 400MHz, 1GB RAM + 256 spare , 18Gb 15K HDD

_________________
[click for links to hinv] JP: [ :O200:

:Fuel: :Octane2: :Octane:

:O2: :Indy: :Indy:

] PL: [ :Fuel: :O2:

]
For Sale: 2*O200 M/B, 2*O200 PSU, 6*256MB O200 RAM, 2*O200 SCSI Backplane, 2*O200 MSC, DMediaPro DM-2 ( 030-1653-002 Rev. H , XT-DIGVID) with Octane XIO pull (Origin pull optionally available)

[[C|-|E]]
Who joined March 2, 2011, 1:37 a.m.
and authored 407 notes

Wrote the following at Feb. 19, 2012, 2:44 p.m...

That is also a great O2, I had to work like crazy to have a configuration like that in mine

_________________