SGI: hinv

Octane2, R12k 400MHz, 1GB Ram, 2*73GB, PCI Cage, V10

kubatyszko
Who joined Nov. 12, 2011, 3:18 a.m.
and authored 294 notes

Wrote the following at Dec. 2, 2011, 4:34 p.m...

Code:

  Location: /hw/node
  
  PM10400MHZ Board: barcode LLH310     part 030-1475-002 rev  B
  
  Location: /hw/node/xtalk/15
  
  IP30 Board: barcode LKD029     part 030-1467-001 rev  D
  
  Location: /hw/node/xtalk/15/pci/2
  
  FP1 Board: barcode MGK776     part 030-0891-003 rev  J
  
  PWR.SPPLY.ER Board: barcode AAE1390114 part 060-0035-003 rev  A
  
  Location: /hw/node/xtalk/13
  
  XTALKPCI Board: barcode MSD813     part 030-0952-007 rev  B
  
  Location: /hw/node/xtalk/11
  
  ODY32VERSIONB Board: barcode MDF587     part 030-1655-001 rev  C
  
  1 400 MHZ IP30 Processor
  
  Heart ASIC: Revision F
  
  CPU: MIPS R12000 Processor Chip Revision: 3.5
  
  FPU: MIPS R12010 Floating Point Chip Revision: 0.0
  
  Main memory size: 1024 Mbytes
  
  Xbow ASIC: Revision 1.4
  
  Instruction cache size: 32 Kbytes
  
  Data cache size: 32 Kbytes
  
  Secondary unified instruction/data cache size: 2 Mbytes
  
  Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  
  Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  
  IOC3/IOC4 serial port: tty1
  
  IOC3/IOC4 serial port: tty2
  
  IOC3 parallel port: plp1
  
  Graphics board: V10
  
  Integral Fast Ethernet: ef0, version 1, pci 2
  
  Gigabit Ethernet: tg1, PCI slot 1
  
  Iris Audio Processor: version RAD revision 12.0, number 1
  
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1

And the V10, plugged via 13W3-13W3 -> 13W3-VGA cables into Benq E2200HD (working vfo posted here: http://forums.nekochan.net/viewtopic.php?f=3&t=16725900 ).

Code:

  Graphics board 0 is "ODYSSEY" graphics.
  
  Managed (":0.0") 1920x1088
  
  BUZZ version B.1
  
  PB&J version 1
  
  32MB memory
  
  Banks: 2, CAS latency: 3
  
  Monitor 0 type: Unknown
  
  Channel 0:
  
  Origin = (0,0)
  
  Video Output: 1920 pixels, 1080 lines, 60.00Hz (1920x1080_60_t6)

The PCI cage currently hosts HP N7770 tg3-based card, I also tried qlogic 1080 (but removed it since then).

Cheers

_________________
[click for links to hinv] JP: [ :O200:

:Fuel: :Octane2: :Octane:

:O2: :Indy: :Indy:

] PL: [ :Fuel: :O2:

]
For Sale: 2*O200 M/B, 2*O200 PSU, 6*256MB O200 RAM, 2*O200 SCSI Backplane, 2*O200 MSC, DMediaPro DM-2 ( 030-1653-002 Rev. H , XT-DIGVID) with Octane XIO pull (Origin pull optionally available)