Hi again !
Here is my "new" Octane2. In fact I received it quite one year ago but didn't found time to play with very often up to now. I hope it will change...
Here is my "new" Octane2. In fact I received it quite one year ago but didn't found time to play with very often up to now. I hope it will change...
Code:
hinv -vm
Location: /hw/node
PM10360MHZ Board: barcode KXS952 part 030-1590-001 rev B
Location: /hw/node/xtalk/15
IP30 Board: barcode KSX636 part 030-1467-001 rev D
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE0010025 part 060-0035-002 rev A
FP1 Board: barcode KSN772 part 030-0891-003 rev G
Location: /hw/node/xtalk/11
ODY32 Board: barcode KXS098 part 030-1403-003 rev A
1 360 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Location: /hw/node
PM10360MHZ Board: barcode KXS952 part 030-1590-001 rev B
Location: /hw/node/xtalk/15
IP30 Board: barcode KSX636 part 030-1467-001 rev D
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE0010025 part 060-0035-002 rev A
FP1 Board: barcode KSN772 part 030-0891-003 rev G
Location: /hw/node/xtalk/11
ODY32 Board: barcode KXS098 part 030-1403-003 rev A
1 360 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Code:
/usr/gfx/gfxinfo -v
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 96.04Hz (1280x1024_96)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 96.04Hz (1280x1024_96)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
Code:
uname -aR
IRIX64 bx_octane2 6.5 6.5.29f 01090133 IP30
/code]
[code]scsicontrol -i /dev/scsi/*
/dev/scsi/sc0d1l0: Disk SEAGATE SX1181677LCV C00C
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
/dev/scsi/sc0d2l0: Disk SEAGATE ST336704LC 0003
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
[/code]
[code]/sbin/diskpatch -v
sc0d1l0: Disk SEAGATE SX1181677LCV C00C Serial: 3EM0CB4W
sc0d2l0: Disk SEAGATE ST336704LC 0003 Serial: 3CD07R2B
IRIX64 bx_octane2 6.5 6.5.29f 01090133 IP30
/code]
[code]scsicontrol -i /dev/scsi/*
/dev/scsi/sc0d1l0: Disk SEAGATE SX1181677LCV C00C
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
/dev/scsi/sc0d2l0: Disk SEAGATE ST336704LC 0003
ANSI vers 3, ISO ver: 0, ECMA ver: 0; supports: 16bit synch linkedcmds cmdqueing
Device is ready
[/code]
[code]/sbin/diskpatch -v
sc0d1l0: Disk SEAGATE SX1181677LCV C00C Serial: 3EM0CB4W
sc0d2l0: Disk SEAGATE ST336704LC 0003 Serial: 3CD07R2B
_________________
4xR12k 400, 8Gb, IR2E, 2x18+3x73GB HD (oxygen)
16xItanium2 1.6, L2 9MB (neon)
R16k 800 V12, 2Gb, M-Audio, 36+147GB HD, 3Dconnexion SpaceMouse Classic (nitrogen)
Dual R14k 600 V6, 2Go, HD (173Go, 34Go) (carbon)
R10k 400 MXE, 1280Mo (lithium) / 2xR10k 300 SSE,... (fluorine)
R10k 195, 512Mo (hydrogen) / R5k 180, 512Mo (sodium) / R5k 180->200 motherboard and PM only
R10k 195, HighImpact, 160Mo (helium) / R4400 125, Extreme, 160Mo (boron)
twin O200, 4xR12k 270, 2Go, HD (4x18Go) (beryllium)
R4k 100, 80Mo, LG1, 9GB HD, Python 25601 tape (magnesium])
4D70GT... my very first one (now property of
musée bolo
and the foundation
mémoires informatiques
)
See the hinv/gfxinfo posts here .