SGI: hinv

Origin 300, 4x600MHz R14K, 4Gb with PCI Expansion cage.

regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at Sept. 25, 2006, 3:43 a.m...

Code: Select all

Location: /hw/module/001c02/node
IP45_4CPU Board: barcode KJD687     part 030-1797-001 rev -B
Location: /hw/module/001c02/Ibrick/xtalk/14
IO8 Board: barcode MHL579     part 030-1673-003 rev -E
Location: /hw/module/001c02/Ibrick/xtalk/15
IO8 Board: barcode MHL579     part 030-1673-003 rev -E
Location: /hw/module/001p04/node
BIC Board: barcode MJS429     part 030-1740-001 rev -F
Location: /hw/module/001p04/Pbrick/xtalk/8
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/9
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/12
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/13
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/14
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/15
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
4 600 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c02/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 1 at Module 001c02/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 2 at Module 001c02/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 3 at Module 001c02/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c02/Slot 0: 4096 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001p04/Slot 0: 0 MB (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 6: Version Fibre Channel QL2342 Port 1, 66 MHz PCI
Integral SCSI controller 7: Version Fibre Channel QL2342 Port 2, 66 MHz PCI
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Integral Fast Ethernet: ef0, version 1, module 001c02, pci 4
Gigabit Ethernet: tg1, module 001p04, PCI bus 2 slot 1 port 0
Gigabit Ethernet: tg2, module 001p04, PCI bus 2 slot 1 port 1
Gigabit Ethernet: tg3, module 001p04, PCI bus 3 slot 1 port 0
Gigabit Ethernet: tg4, module 001p04, PCI bus 3 slot 1 port 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c02/Slot n0: Revision 6.210
USB controller: type OHCI

[/code]
regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at Nov. 17, 2006, 9:15 p.m...
I just bough a FibreChannel Disk Array as reflected below..
Disk units 30 to 39 hanging off the 2342 PCI FC card...
(Thanks Aussie_Jon)

Code: Select all

Location: /hw/module/001c02/node
IP45_4CPU Board: barcode KJD687     part 030-1797-001 rev -B
Location: /hw/module/001c02/Ibrick/xtalk/14
IO8 Board: barcode MHL579     part 030-1673-003 rev -E
Location: /hw/module/001c02/Ibrick/xtalk/15
IO8 Board: barcode MHL579     part 030-1673-003 rev -E
Location: /hw/module/001p04/node
BIC Board: barcode MJS429     part 030-1740-001 rev -F
Location: /hw/module/001p04/Pbrick/xtalk/8
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/9
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/12
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/13
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/14
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
Location: /hw/module/001p04/Pbrick/xtalk/15
PEBRICK Board: barcode MHZ113     part 030-1724-001 rev -E
4 600 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c02/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 1 at Module 001c02/Slot 0/Slice B: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 2 at Module 001c02/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 3 at Module 001c02/Slot 0/Slice D: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c02/Slot 0: 4096 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001p04/Slot 0: 0 MB (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 6: Version Fibre Channel QL2342 Port 1, 66 MHz PCI
Disk drive: unit 30 on SCSI controller 6 (unit 30)
Disk drive: unit 31 on SCSI controller 6 (unit 31)
Disk drive: unit 32 on SCSI controller 6 (unit 32)
Disk drive: unit 33 on SCSI controller 6 (unit 33)
Disk drive: unit 34 on SCSI controller 6 (unit 34)
Disk drive: unit 35 on SCSI controller 6 (unit 35)
Disk drive: unit 36 on SCSI controller 6 (unit 36)
Disk drive: unit 37 on SCSI controller 6 (unit 37)
Disk drive: unit 38 on SCSI controller 6 (unit 38)
Disk drive: unit 39 on SCSI controller 6 (unit 39)
Integral SCSI controller 7: Version Fibre Channel QL2342 Port 2, 66 MHz PCI
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Integral Fast Ethernet: ef0, version 1, module 001c02, pci 4
Gigabit Ethernet: tg1, module 001p04, PCI bus 2 slot 1 port 0
Gigabit Ethernet: tg2, module 001p04, PCI bus 2 slot 1 port 1
Gigabit Ethernet: tg3, module 001p04, PCI bus 3 slot 1 port 0
Gigabit Ethernet: tg4, module 001p04, PCI bus 3 slot 1 port 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c02/Slot n0: Revision 6.210
USB controller: type OHCI
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000
regan_russell avatar
regan_russell
From Sydney, Australia
Who joined July 18, 2006, 9:32 p.m.
Wrote the following at Dec. 1, 2006, 6:33 a.m...
And now I have the Fibre Channel array working:

Code: Select all

Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs   17G   13G   3.5G   80%  /
/dev/lxvm/datavol       xfs  153G  1.3G   151G    1%  /data


Disk 38 failed.


Regan
:Onyx2R: :Onyx2R: :0300: :0300: :0300: :O200: :Octane: :Octane: :O2: :O2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy: :Indy:
:hpserv: J5600, 2 x SUN, 2 x Mac, 3 x Alpha, 2 x RS/6000