I have just got my hands on a DVD ROM drive and have hooked it up to my Octane2.
But when I try to mount or acces a CD or DVD nothing happens.
I did try to use XCDRoast to see if it would detect a drive and yes it does!
Here's what it reports :
So there must be something I'm not getting into my thick head....
I do not need to install something from my Irix software, or do I ?
But when I try to mount or acces a CD or DVD nothing happens.
I did try to use XCDRoast to see if it would detect a drive and yes it does!
Here's what it reports :
Code: Select all
scsidev: '1,4,0'
scsibus: 1 target: 4 lun: 0
Write Performance:
START LBA: 0
End LBA: 1153595
Start Perf: 2822 == 16x CD
END Perf: 7056 == 40x CD
Read Performance:
START LBA: 0
End LBA: 0
Start Perf: 0 == 0x CD
END Perf: 0 == 0x CD
End LBA: 2822
Read Speed: 1153595 == 6554x CD
Write Speed: 7056 == 40x CD
Cdrecord-ProDVD-ProBD-Clone 2.01.01a35 (mips-sgi-irix6.5) Copyright (C) 1995-2007 Jörg Schilling
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-M1401'
Revision : '1007'
Device seems to be: Generic mmc2 DVD-ROM.
Drive capabilities, per MMC-2 page 2A:
Does read CD-R media
Does not write CD-R media
Does read CD-RW media
Does not write CD-RW media
Does read DVD-ROM media
Does read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does not support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does not support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data
Does play audio CDs
Number of volume control levels: 16
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 7056 kB/s (CD 40x, DVD 5x, BD 1x)
Current read speed: 7056 kB/s (CD 40x, DVD 5x, BD 1x)
Maximum write speed: 0 kB/s (CD 0x, DVD 0x, BD 0x)
Current write speed: 0 kB/s (CD 0x, DVD 0x, BD 0x)
Buffer size in KB: 128
Copy management revision supported: 1
Current performance according to MMC get performance:
Maximum performance according to MMC get performance:
Supported profiles according to MMC-4 feature list:
Current: CD-ROM
Profile: DVD-ROM
Profile: CD-ROM (current)
Supported features according to MMC-4 feature list:
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Random Readable' (current)
Feature: 'Multi Read' (current) (persistent)
Feature: 'CD Read' (current)
Feature: 'DVD Read'
Feature: 'Power Management' (current) (persistent)
Feature: 'CD Audio analog play'
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'
Feature: 'Real Time Streaming' (current)
So there must be something I'm not getting into my thick head....
I do not need to install something from my Irix software, or do I ?
I can feel it, my mind is going ....
