I got my hands on an Origin 350 today. The real thing, not an
Altix 350 with Onyx4 skins
this time...
The original configuration was 2x600MHz. The machine had not been used in the last 6.5 years until I asked for an hinv to confirm the configuration:
And was thus fitted this way (the two 18GB disks had been removed for zeroing already):
So I replaced the PIMM with a 4x700MHz PIMM I got from dhjj:
... and I am a happy Origin 350 owner now!
The original configuration was 2x600MHz. The machine had not been used in the last 6.5 years until I asked for an hinv to confirm the configuration:
Code: Select all
001c01-L1>log
04/17/08 11:40:39 L1 booting 1.38.4
04/17/08 11:40:39 ChiServ IP53
04/17/08 11:40:39 Checking for Type
04/17/08 11:40:39 -- ChiServ Type set
04/17/08 11:40:41 USB0: waiting on open
04/17/08 11:40:41 auto power up countdown initiated
04/17/08 11:42:06 auto power up initiated
04/17/08 11:42:06 power up (COMMAND)
04/17/08 11:42:11 PIC cfg: 0x04
04/17/08 11:42:11 Node 0 XTalk clock 88
04/17/08 11:42:12 reset again MIPS
04/17/08 11:42:17 PIC cfg: 0x04
04/17/08 11:42:17 Node 0 XTalk clock 88
04/18/08 07:37:53 power down (PANEL)
11/18/14 06:10:41 L1 booting 1.38.4
11/18/14 06:10:41 ChiServ IP53
11/18/14 06:10:41 Checking for Type
11/18/14 06:10:41 -- ChiServ Type set
11/18/14 06:10:43 USB0: waiting on open
11/18/14 06:10:43 auto power up countdown initiated
11/18/14 06:12:08 auto power up initiated
11/18/14 06:12:08 power up (COMMAND)
11/18/14 06:12:12 PIC cfg: 0x04
11/18/14 06:12:13 Node 0 XTalk clock 88
11/18/14 06:12:14 reset again MIPS
11/18/14 06:12:18 PIC cfg: 0x04
11/18/14 06:12:19 Node 0 XTalk clock 88
11/18/14 06:57:42 power down (PANEL)
11/24/14 03:09:56 L1 booting 1.38.4
11/24/14 03:09:56 ChiServ IP53
11/24/14 03:09:56 Checking for Type
11/24/14 03:09:56 -- ChiServ Type set
11/24/14 03:09:58 USB0: waiting on open
11/24/14 03:09:58 auto power up countdown initiated
11/24/14 03:10:03 power up (PANEL)
11/24/14 03:10:08 PIC cfg: 0x04
11/24/14 03:10:08 Node 0 XTalk clock 88
11/24/14 03:10:09 reset again MIPS
11/24/14 03:10:14 PIC cfg: 0x04
11/24/14 03:10:14 Node 0 XTalk clock 88
11/24/14 03:11:47 power down (PANEL)
And was thus fitted this way (the two 18GB disks had been removed for zeroing already):
Code: Select all
>> hinv -v
IP35 Node Board, Module 001c01
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
Processor A: 600 MHz R16000 Rev 2.1
Secondary Cache 4MB 300MHz Tap 0xc , (cpu 0)
R16010FPC Rev 2.1
Processor C: 600 MHz R16000 Rev 2.1
Secondary Cache 4MB 300MHz Tap 0xc , (cpu 1)
R16010FPC Rev 2.1
Memory on board, 2048 MBytes (Standard)
Bank 0, 512 MBytes (Premium) <-- (Software Bank 0)
Bank 1, 512 MBytes (Premium)
Bank 4, 512 MBytes (Premium)
Bank 5, 512 MBytes (Premium)
IXBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 3, (widget 15)
adapter IOC4 Rev 53
(pci id 1)
adapter IOC4-ATA Rev 53
(pci id 1)
peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8177
adapter PCI (SCSI interface) Rev 5
(pci id 2)
adapter PCI (SCSI interface) Rev 6
(pci id 3)
adapter GigE Rev 15
(pci id 4)
IXBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 3, (widget 15)
ASIC XBOW Rev 3, on CBrick, Module 001c01
So I replaced the PIMM with a 4x700MHz PIMM I got from dhjj:
Code: Select all
>> hinv -v
IP35 Node Board, Module 001c01
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
Processor A: 700 MHz R16000 Rev 2.1
Secondary Cache 8MB 350MHz Tap 0xa , (cpu 0)
R16010FPC Rev 2.1
Processor B: 700 MHz R16000 Rev 2.1
Secondary Cache 8MB 350MHz Tap 0xa , (cpu 1)
R16010FPC Rev 2.1
Processor C: 700 MHz R16000 Rev 2.1
Secondary Cache 8MB 350MHz Tap 0xa , (cpu 2)
R16010FPC Rev 2.1
Processor D: 700 MHz R16000 Rev 2.1
Secondary Cache 8MB 350MHz Tap 0xa , (cpu 3)
R16010FPC Rev 2.1
Memory on board, 2048 MBytes (Standard)
Bank 0, 512 MBytes (Premium) <-- (Software Bank 0)
Bank 1, 512 MBytes (Premium)
Bank 4, 512 MBytes (Premium)
Bank 5, 512 MBytes (Premium)
IXBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 3, (widget 15)
adapter IOC4 Rev 53
(pci id 1)
adapter IOC4-ATA Rev 53
(pci id 1)
peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8177
adapter PCI (SCSI interface) Rev 5
(pci id 2)
adapter PCI (SCSI interface) Rev 6
(pci id 3)
adapter GigE Rev 15
(pci id 4)
IXBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 3, (widget 15)
ASIC XBOW Rev 3, on CBrick, Module 001c01
... and I am a happy Origin 350 owner now!
R4000
R4000
R4000
R4400
R4400
R8000
R10000
R4000PC
R4000SC
R4600
R5000SC
R5000
RM7000
2xR10000
R12000
2xR12000
-
2x2xR10000
R16000
4xR16000
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI , Motorola, NeXT, SGI, Solbourne, Sun...
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI , Motorola, NeXT, SGI, Solbourne, Sun...