Saved this baby from the dumpster. Don't know yet what I'll do with it.
My third Octane, and still no PCI cardcage
...and now that I have the root password:
-Darkstar
My third Octane, and still no PCI cardcage
Code:
>> hinv -t
system ARC SGI-IP30 key 0
processor CPU MIPS-R12000 key 0
processor FPU MIPS-R12010FPC key 0
cache primary icache 32 Kbytes (block 2 lines, line 64 bytes)
cache primary dcache 32 Kbytes (block 2 lines, line 32 bytes)
cache secondary cache 2048 Kbytes (block 2 lines, line 128 bytes)
memory main 2176 Mbytes
adapter XTalk heart key 0
adapter PCI key 15
adapter multi function ioc3 key 0
controller network ef0 key 0
peripheral network ef0 ethernet (100/10 base-T) key 0
controller serial IP30 tty key 0
peripheral line key 0
controller serial IP30 tty key 1
peripheral line key 0
controller pointer pcms key 0
peripheral pointer key 0
adapter SCSI QLISP1040 key 0
controller disk SGI SEAGATE ST318404 key 1
peripheral disk unit 0
adapter SCSI QLISP1040 key 1
controller audio RAD Audio Processor key 0
controller display SGI-ODYSSEY key 0
>> hinv
System: IP30
Processor: 400 Mhz R12000, with FPU
Primary I-cache size: 32 Kbytes
Primary D-cache size: 32 Kbytes
Secondary cache size: 2 Mbytes
Memory size: 2176 Mbytes
Network: ef0 ethernet (100/10 base-T)
SCSI Disk: scsi(0)disk(1)
Audio: RAD Audio Processor
Graphics: ODYSSEY
system ARC SGI-IP30 key 0
processor CPU MIPS-R12000 key 0
processor FPU MIPS-R12010FPC key 0
cache primary icache 32 Kbytes (block 2 lines, line 64 bytes)
cache primary dcache 32 Kbytes (block 2 lines, line 32 bytes)
cache secondary cache 2048 Kbytes (block 2 lines, line 128 bytes)
memory main 2176 Mbytes
adapter XTalk heart key 0
adapter PCI key 15
adapter multi function ioc3 key 0
controller network ef0 key 0
peripheral network ef0 ethernet (100/10 base-T) key 0
controller serial IP30 tty key 0
peripheral line key 0
controller serial IP30 tty key 1
peripheral line key 0
controller pointer pcms key 0
peripheral pointer key 0
adapter SCSI QLISP1040 key 0
controller disk SGI SEAGATE ST318404 key 1
peripheral disk unit 0
adapter SCSI QLISP1040 key 1
controller audio RAD Audio Processor key 0
controller display SGI-ODYSSEY key 0
>> hinv
System: IP30
Processor: 400 Mhz R12000, with FPU
Primary I-cache size: 32 Kbytes
Primary D-cache size: 32 Kbytes
Secondary cache size: 2 Mbytes
Memory size: 2176 Mbytes
Network: ef0 ethernet (100/10 base-T)
SCSI Disk: scsi(0)disk(1)
Audio: RAD Audio Processor
Graphics: ODYSSEY
...and now that I have the root password:
Code:
octane10(ttyd1):root:/> /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
(Could not contact X server; thus, no XSGIvc information available)
octane10(ttyd1):root:/> hinv -v
1 400 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2176 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version A.1
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
(Could not contact X server; thus, no XSGIvc information available)
octane10(ttyd1):root:/> hinv -v
1 400 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2176 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3
-Darkstar
_________________
My SGI collection, in chronological order:
Current tasks: Find Indigo Keyboard+Mouse, find Octane PCI cardcage, find O2k Hardware
Other systems from my collection:
IBM PReP 43P/120, HP 9000/712, DEC VAXstation 4000 model 60, HP Envizex II, DEC AlphaStation 200, Amiga 2000, HP NetServer LH4r, Commodore 64, Commodore 128, Atari 512ST, Sun SPARCengine CP1500, Sun SPARCengine Ultra AXi