SGI: hinv

Octane2, 2x360MHz, 1GB RAM, EMXI + Video

smj avatar
smj
Donor
From Berkeley, CA, USA, NA, Earth, Sol
Who joined Nov. 12, 2007, 7:54 p.m.
Wrote the following at June 3, 2010, 2:40 a.m...
Recently acquired, still exploring. Pretty serviceable little box, but there's more RAM on the way already. And there's this PCI card cage that came in the "spare" chassis... Will have to add pictures another time.

Code: Select all

octane2# hinv -vm
Location: /hw/node
PM20360MHZ Board: barcode KGL983     part 030-1591-001 rev  A
Location: /hw/node/xtalk/15
IP30 Board: barcode KKJ530     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode MGH323     part 030-0891-003 rev  J
PWR.SPPLY.ER Board: barcode AAE9070645 part 060-0035-001 rev  C
Location: /hw/node/xtalk/12
MOT20 Board: barcode HAT084     part 030-1240-003 rev  D
Location: /hw/node/xtalk/11
EVO Board: barcode GPY486     part 030-1156-999 rev  A
2 360 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Tape drive: unit 2 on SCSI controller 0: DAT
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Personal Video: unit 1, revision 2.0
octane2#


Code: Select all

octane2# ./gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev E, Heart rev F
21" monitor (id 0xb)
Video board present

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
octane2#


Code: Select all

octane2# uname -R
6.5 6.5.22m
octane2# cc -version
MIPSpro Compilers: Version 7.4.4m
octane2#
Then? :IRIS3130: ... Now? :O3x02L: :A3504L: - :A3502L: :1600SW: +MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: :Indy: ... Other: DEC :BA213: :BA123: Sun , DG AViiON , NeXT :Cube:
inca
From Riga, Latvia
Who joined March 28, 2010, 5:05 a.m.
Wrote the following at June 8, 2010, 4 p.m...
A good one! (better then mine):) Mine is only 1x300 Mhz and ESI. (Still hasn't got a camera to take some shots and post a hinv.-)
:O2: :Octane2: :Fuel: